GT50J341,Q [TOSHIBA]
Insulated Gate Bipolar Transistor;
| 型号： | GT50J341,Q |
| 厂家： | 
TOSHIBA |
| 描述： | Insulated Gate Bipolar Transistor 栅 |
| 文件： | 总9页 (文件大小：245K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
GT50J341
Discrete IGBTs Silicon N-Channel IGBT
GT50J341
1. Applications
•
Dedicated to Current-Resonant Inverter Switching Applications
Note: The product(s) described herein should not be used for any other application.
2. Features
(1) Sixth generation
(2) Enhancement mode
(3) High-speed switching: tf = 0.15 µs (typ.) (IC = 50 A)
(4) Low saturation voltage: VCE(sat) = 1.6 V (typ.) (IC = 50 A)
(5) FRD included between emitter and collector
3. Packaging and Internal Circuit
1: Gate
2: Collector
3: Emitter
TO-3P(N)
Start of commercial production
2010-06
2014-01-07
Rev.3.0
1
GT50J341
4. Absolute Maximum Ratings (Note) (Ta = 25, unless otherwise specified)
Characteristics
Symbol
Rating
Unit
V
Collector-emitter voltage
Gate-emitter voltage
VCES
VGES
IC
600
±25
50
Collector current (DC)
Collector current (1 ms)
Diode forward current (DC)
A
ICP
IF
100
28
Diode forward current (400 µs)
Collector power dissipation
Collector power dissipation
Junction temperature
IFP
120
100
200
175
(Tc = 100)
(Tc = 25)
PC
W
(Note 1)
Tj
Storage temperature
Tstg
TOR
-55 to 175
0.8
Mounting torque
Nm
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
In general, loss of IGBT increases more when it has positive temperature coefficient and gets higher
temperature.
In case that the temperature rise due to loss of IGBT exceeds the heat release capacity of a device, it leads
to thermorunaway and results in destruction.
Therefore, please design heat release of a device with due consideration to the temperature rise of IGBT.
Note 1: Ensure that the junction temperature does not exceed 175 .
5. Thermal Characteristics
Characteristics
Symbol
Max
Unit
Junction-to-case thermal resistance (IGBT)
Junction-to-case thermal resistance (diode)
Rth(j-c)
0.75
1.8
/W
2014-01-07
Rev.3.0
2
GT50J341
6. Electrical Characteristics
6.1. Static Characteristics (Ta = 25, unless otherwise specified)
Characteristics
Gate leakage current
Symbol
Test Condition
Min
Typ.
Max
Unit
IGES
ICES
VGE = ±25 V, VCE = 0 V
±100
1.0
nA
mA
V
Collector cut-off current
VCE = 600 V, VGE = 0 V
Gate-emitter cut-off voltage
Collector-emitter saturation voltage
Diode forward voltage
VGE(OFF) IC = 50 mA, VCE = 5 V
VCE(sat) IC = 50 A, VGE = 15 V
4.5
7.5
1.6
2.2
VF
IF = 15 A, VGE = 0 V
2.0
6.2. Dynamic Characteristics (Ta = 25, unless otherwise specified)
Characteristics
Symbol
Test Condition
Min
Typ.
Max
Unit
pF
Input capacitance
Cies
VCE = 10 V, VGE = 0 V,
f = 1 MHz
2700
Switching time (rise time)
Switching time (turn-on time)
Switching time (fall time)
Switching time (turn-off time)
Reverse recovery time
tr
ton
tf
Resistive load
0.18
0.27
0.15
0.45
0.1
µs
VCC = 300 V, IC = 50 A,
VGG = ±15 V, RG = 39 Ω
See Fig. 6.2.1, 6.2.2.
0.35
toff
trr
IF = 15 A, VGE = 0 V,
di/dt = -100 A/µs
Fig. 6.2.1 Test Circuit of Switching Time
Fig. 6.2.2 Timing Chart of Switching Time
7. Marking (Note)
Fig. 7.1 Marking
Note: A line under a Lot No. identifies the indication of product Labels.
[[G]]/RoHS COMPATIBLE or [[G]]/RoHS [[Pb]]
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS
compatibility of Product.
The RoHS is the Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the
restriction of the use of certain hazardous substances in electrical and electronic equipment.
Note: This transistor is sensitive to electrostatic discharge and should be handled with care.
2014-01-07
Rev.3.0
3
GT50J341
8. Characteristics Curves (Note)
Fig. 8.1 IC - VCE
Fig. 8.2 IC - VCE
Fig. 8.3 IC - VCE
Fig. 8.4 VCE(sat) - Tc
Fig. 8.5 IC - VGE
Fig. 8.6 VCE, VGE - Qg
2014-01-07
Rev.3.0
4
GT50J341
Fig. 8.7 C - VCE
Fig. 8.8 Switching Time - IC
Fig. 8.9 Switching Time - RG
Fig. 8.10 rth(j-c) - tw
(Guaranteed Maximum)
2014-01-07
Rev.3.0
5
GT50J341
Fig. 8.11 Safe Operating Area
(Guaranteed Maximum)
Fig. 8.12 Reverse Bias SOA
(Guaranteed Maximum)
Fig. 8.13 IF - VF
Fig. 8.14 Cj - VR
Fig. 8.15 Irr,trr - IF
Fig. 8.16 Irr, trr - di/dt
2014-01-07
Rev.3.0
6
GT50J341
Note: The above characteristics curves are presented for reference only and not guaranteed by production test,
unless otherwise noted.
2014-01-07
Rev.3.0
7
GT50J341
Package Dimensions
Unit: mm
Weight: 4.6 g (typ.)
Package Name(s)
TOSHIBA: 2-16C1S
Nickname: TO-3P(N)
2014-01-07
Rev.3.0
8
GT50J341
RESTRICTIONS ON PRODUCT USE
•
•
•
Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively "Product") without notice.
This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA's
written permission, reproduction is permissible only if reproduction is without alteration/omission.
ThoughTOSHIBAworkscontinuallytoimproveProduct'squalityandreliability,Productcanmalfunctionorfail.Customersareresponsible
for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which
minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage
to property, including data loss or corruption. Before customers use the Product, create designs including the Product, or incorporate
the Product into their own applications, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA
information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the
precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for the application
with which the Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications,
including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating
and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample
application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications.
TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS.
•
PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE
EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH MAY
CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT
("UNINTENDEDUSE").Exceptforspecificapplicationsasexpresslystatedinthisdocument, UnintendedUseincludes, withoutlimitation,
equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles,
trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices,
elevators and escalators, devices related to electric power, and equipment used in finance-related fields. IF YOU USE PRODUCT FOR
UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT. For details, please contact your TOSHIBA sales
representative.
•
•
Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
•
•
The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any
intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER,
INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING
WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND
(2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT,
OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
•
•
Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation,
for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products
(mass destruction weapons). Product and related software and technology may be controlled under the applicable export laws and
regulations including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration
Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all
applicable export laws and regulations.
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES OCCURRING
AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.
2014-01-07
Rev.3.0
9
相关型号：
GT50N322A
TRANSISTOR 50 A, 1000 V, N-CHANNEL IGBT, LEAD FREE, 2-16C1C, 3 PIN, Insulated Gate BIP Transistor
TOSHIBA
GT50S101
TRANSISTOR 50 A, 1400 V, N-CHANNEL IGBT, 2-37A1B, 3 PIN, Insulated Gate BIP Transistor
TOSHIBA
GT520
Ceramic Capacitor, Multilayer, Ceramic, 3000V, 12.5% +Tol, 12.5% -Tol, SL, 500ppm/Cel TC, 0.000002uF, Through Hole Mount, RADIAL LEADED, ROHS COMPLIANT
CDE
GT530
Ceramic Capacitor, Multilayer, Ceramic, 3000V, 8.33% +Tol, 8.33% -Tol, SL, 500ppm/Cel TC, 0.000003uF, Through Hole Mount, RADIAL LEADED, ROHS COMPLIANT
CDE
GT560
Ceramic Capacitor, Multilayer, Ceramic, 3000V, 8.33% +Tol, 8.33% -Tol, SL, 500ppm/Cel TC, 0.000006uF, Through Hole Mount, RADIAL LEADED, ROHS COMPLIANT
CDE
©2020 ICPDF网 联系我们和版权申明