MT4S24U(TE85L) [TOSHIBA]
TRANSISTOR,BJT,NPN,5V V(BR)CEO,50MA I(C),TSOP;型号: | MT4S24U(TE85L) |
厂家: | TOSHIBA |
描述: | TRANSISTOR,BJT,NPN,5V V(BR)CEO,50MA I(C),TSOP |
文件: | 总5页 (文件大小:167K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MT4S24U
TOSHIBA Transistor Silicon NPN Epitaxial Planar Type
MT4S24U
Unit: mm
VHF~UHF Band Low Noise Amplifier Applications
•
•
Low Noise Figure: NF = 1.55dB(Typ.) (@f = 2GHz)
High Gain: |S21e|2 = 11.5dB(Typ.) (@f = 2 GHz)
Absolute Maximum Ratings (Ta = 25°C)
1.Emitter1(E1)
2.Collector(C)
3.Emitter2(E2)
4.Base(B)
Characteristic
Collector-base voltage
Symbol
Unit
Rating
USQ
V
CBO
V
CEO
V
EBO
V
V
10
Collector-emitter voltage
Emitter-base voltage
Collector current
5
JEDEC
JEITA
―
―
V
2
50
I
mA
mA
mW
°C
°C
C
TOSHIBA
2-2K1A
Base current
I
B
10
Weight: 6 mg (typ.)
Collector power dissipation
Junction temperature
Storage temperature range
P
C(Note.1)
Tj
175
150
Tstg
−55 to 150
Note.1: The device is mounted on a FR4 board (20mm X 25mm X 1.55 mm (t))
Note.2: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly
even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute
maximum ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Marking
4
3
2
Type Name
R 8
1
1
2010-08-18
MT4S24U
Microwave Characteristics (Ta = 25°C)
Characteristic
Transition frequency
Symbol
Condition
Min
Typ.
Max
Unit
V
V
V
= 3 V, I = 20 mA
14.5
11.5
1.55
⎯
⎯
12.5
f
CE
CE
CE
C
GHz
T
2
= 3 V, I = 20 mA, f = 2 GHz
9.5
|S21e|
Insertion gain
Noise figure
C
dB
= 3 V, I = 7 mA, f = 2 GHz
⎯
2.35
NF
C
Electrical Characteristics (Ta = 25°C)
Characteristic
Collector cut-off current
Symbol
Condition
Min
Typ.
Max
Unit
V
V
V
V
= 6 V, I = 0
⎯
⎯
70
⎯
⎯
⎯
100
100
140
0.8
I
CB
EB
CE
CB
E
nA
nA
⎯
CBO
= 1 V, I = 0
I
Emitter cut-off current
DC current gain
C
EBO
= 3 V, I = 20 mA
⎯
h
C
FE
= 3 V, I = 0, f = 1 MHz(Note3)
0.34
C
re
Reverse transfer capacitance
E
pF
Note 3: C is measured with a three-terminal method using a capacitance bridge.
re
Caution
This device is sensitive to electrostatic discharge. Ensure that tools and equipment are sufficiently grounded before
handling. When handling individual devices (which are not yet mounted on a circuit board), ensure that the
environment is protected against electrostatic discharge. Operators should wear antistatic clothing, and containers
and other objects that come into direct contact with devices should be made of antistatic materials.
2
2010-08-18
MT4S24U
h
-I
FE C
I -V
C
BE
100
10
1000
100
10
COMMON EMITTER
VCE=3V
Ta=25℃
COMMON EMITTER
VCE=3V
Ta=25℃
1
0.1
0.01
0.001
0
0.2
0.4
0.6
0.8
1
1
10
100
Collector-current I (mA)
Base-emitter voltage V (V)
BE
C
I -V
f -I
T C
C
CE
16
14
12
10
8
70
60
COMMON EMITTER
Ta=25℃
VCE=3V
f=2GHz
Ta=25℃
IB=500μA
IB=550μA
IB=450μA IB=400μA IB=350μA
50
40
30
20
10
0
300μA
250μA
200μA
6
150μA
100μA
4
2
50μA
0
1
10
100
0
1
2
3
4
5
6
Collector-emitter voltage V (V)
Collector-current I (mA)
C
CE
|S
|2-I
NF, Ga -I
C
21e
C
22
20
18
16
14
12
10
8
6
5
4
3
2
1
14
12
10
8
VCE=3V
Ta=25℃
VCE=3V
f=2GHz
Ga
Ta=25℃
f=1000MHz
f=2000MHz
NF
6
6
4
4
2
0
1
2
0
10
100
1
10
100
Collector-current I (mA)
Collector-current I (mA)
C
C
3
2010-08-18
MT4S24U
|S
|2-Freq.
OIP -I
3 C
21e
26
25
24
23
22
21
20
34
32
30
28
26
24
22
20
18
16
14
12
10
8
VCE=3V
IC=20mA
Ta=25℃
VCE=3V
Pin=-20dBmW
f=2GHz(⊿1MHz)
Ta=25℃
1
10
100
0.1
1
10
Frequency (GHz)
Collector-current I (mA)
C
C ,C -V
re ob CB
P
out
- P
in
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0.0
20
IE=0
f=1MHz
Ta=25℃
VCE=3V
IC=20mA
f=2GHz
Ta=25℃
10
0
Cob
Cre
-10
-20
-30
-40
-50
0.1
1
10
-55 -45
-35 -25
-15
-5
5
15
Collector-base voltage V (V)
INPUT Level P (dBmW)
in
CB
P -T
C
a
250
The device is mounted on a FR4
(20mmx25mmx1.55mmt)
225
200
175
150
125
100
75
Device
50
25
0
0
25
50
75
100
125
150
Ambient temperature T (°C )
a
4
2010-08-18
MT4S24U
RESTRICTIONS ON PRODUCT USE
•
•
•
Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively “Product”) without notice.
This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.
Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the
Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of
all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes
for Product and the precautions and conditions set forth in the “TOSHIBA Semiconductor Reliability Handbook” and (b) the
instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their
own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such
design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts,
diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating
parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR
APPLICATIONS.
•
Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring
equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.
Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or
reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious
public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used
in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling
equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric
power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this
document.
•
•
Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
•
•
The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
•
•
Do not use or otherwise make available Product or related software or technology for any military purposes, including without
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile
technology products (mass destruction weapons). Product and related software and technology may be controlled under the
Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product
or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of
noncompliance with applicable laws and regulations.
5
2010-08-18
相关型号:
©2020 ICPDF网 联系我们和版权申明