TC7WH17FK [TOSHIBA]

NON-INVERT GATE;


型号：	TC7WH17FK
厂家：	TOSHIBA
描述：	NON-INVERT GATE 光电二极管逻辑集成电路
文件：	总7页 (文件大小：137K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

TC7WH17FK

CMOS Digital Integrated Circuits Silicon Monolithic

TC7WH17FK

1. Functional Description

•

Triple Schmitt Buffer

2. Features

(1) AEC-Q100 (Rev. H) (Note 1)

(2) Wide operating temperature range: Topr = -40 to 125  (Note 2)

(3) High speed operation: tpd = 5.5 ns (typ.) (VCC = 5.0 V, CL = 15 pF)

(4) Low power dissipation: ICC = 2.0 µA (max) (Ta = 25 )

(5) Wide operating voltage range: VCC = 2.0 to 5.5 V

(6) High noise immunity: VNIH = VNIL = 28 % VCC (min)

(7) Balanced propagation delays: tPLH ≈ tPHL

(8) 5.5 V tolerant inputs

Note 1: This device is compliant with the reliability requirements of AEC-Q100. For details, contact your Toshiba sales

representative.

Note 2: For devices with the ordering part number TC7WH17FK,LJ(CT. Topr = -40 to 85  for the other devices.

3. Packaging

US8

Start of commercial production

2014-12

2016-09-21

Rev.2.0

TC7WH17FK

4. Marking and Pin Assignment

Marking

Pin Assignment (Top view)

5. IEC Logic Symbol

6. Truth Table

7. Absolute Maximum Ratings (Note) (Unless otherwise specified, Ta = 25 )

Characteristics

Symbol

Note

Rating

Unit

Supply voltage

Input voltage

VCC

VIN

-0.5 to 7.0

-0.5 to VCC + 0.5

-20

DC output voltage

VOUT

IIK

Input diode current

Output diode current

DC output current

VCC/ground current

Power dissipation

Storage temperature

IOK

(Note 1)

±20

IOUT

ICC

±25

±50

200

Tstg

-65 to 150



Note: Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance or even

destruction.

Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the

significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even

if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum

ratings and the operating ranges.

Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook

(“HandlingPrecautions”/“DeratingConceptandMethods”)andindividualreliabilitydata(i.e. reliabilitytestreport

and estimated failure rate, etc).

Note 1: VOUT < GND, VOUT > VCC

2016-09-21

Rev.2.0

TC7WH17FK

8. Operating Ranges (Note)

Characteristics

Symbol

Note

Test Condition

Rating

Unit

Supply voltage

Input voltage

VCC

VIN



2.0 to 5.5

0 to 5.5

Output voltage

VOUT

Topr

0 to VCC

-40 to 125

-40 to 85

Operating temperature

(Note 1)

(Note 2)



Note: The operating ranges must be maintained to ensure the normal operation of the device.

Unused inputs must be tied to either VCC or GND.

Note 1: For devices with the ordering part number TC7WH17FK,LJ(CT.

Note 2: For devices except those with the ordering part number TC7WH17FK,LJ(CT.

9. Electrical Characteristics

9.1. DC Characteristics (Unless otherwise specified, Ta = 25 )

Characteristics

Symbol

Test Condition

VCC (V)

Min

Typ.

Max

Unit

Positive threshold voltage



3.0

4.5

5.5

3.0

4.5

5.5

3.0

4.5

5.5

2.0

3.0

4.5

3.0

4.5

2.0

3.0

4.5

3.0

4.5

0 to 5.5

5.5



2.20

3.15

3.85



Negative threshold voltage

Hysteresis voltage



0.90

1.35

1.65

0.30

0.40

0.50

1.9

2.9

4.4

2.58

3.94



1.20

1.40

1.60



High-level output voltage

VOH

VIN = VIH

IOH = -50 µA

2.0

3.0

4.5



IOH = -4 mA

IOH = -8 mA

IOL = 50 µA



Low-level output voltage

VOL

VIN = VIL

0.0



0.1

0.36

±0.1

2.0



IOL = 4 mA

IOL = 8 mA



Input leakage current

IIN

VIN = 5.5 V or GND

VIN = VCC or GND



µA

Quiescent supply current

ICC



2016-09-21

Rev.2.0

TC7WH17FK

9.2. DC Characteristics (Unless otherwise specified, Ta = -40 to 85 )

Characteristics

Symbol

Test Condition

VCC (V)

Min

Max

Unit

Positive threshold voltage



3.0

4.5

5.5

3.0

4.5

5.5

3.0

4.5

5.5

2.0

3.0

4.5

3.0

4.5

2.0

3.0

4.5

3.0

4.5

0 to 5.5

5.5



2.20

3.15

3.85



Negative threshold voltage

Hysteresis voltage



0.90

1.35

1.65

0.30

0.40

0.50

1.9

2.9

4.4

2.48

3.80



1.20

1.40

1.60



High-level output voltage

VOH

VIN = VIH

IOH = -50 µA



IOH = -4 mA

IOH = -8 mA

IOL = 50 µA



Low-level output voltage

VOL

VIN = VIL

0.1

0.44

±1.0

20.0



IOL = 4 mA

IOL = 8 mA



Input leakage current

IIN

VIN = 5.5 V or GND

VIN = VCC or GND



µA

Quiescent supply current

ICC



9.3. DC Characteristics (Note) (Unless otherwise specified, Ta = -40 to 125 )

Characteristics

Symbol

Test Condition

VCC (V)

Min

Max

Unit

Positive threshold voltage



3.0

4.5

5.5

3.0

4.5

5.5

3.0

4.5

5.5

2.0

3.0

4.5

3.0

4.5

2.0

3.0

4.5

3.0

4.5

0 to 5.5

5.5



2.20

3.15

3.85



Negative threshold voltage

Hysteresis voltage



0.90

1.35

1.65

0.30

0.40

0.50

1.9

2.9

4.4

2.40

3.70



1.20

1.40

1.60



High-level output voltage

VOH

VIN = VIH

IOH = -50 µA



IOH = -4 mA

IOH = -8 mA

IOL = 50 µA



Low-level output voltage

VOL

VIN = VIL

0.1

0.55

±2.0

40.0



IOL = 4 mA

IOL = 8 mA



Input leakage current

IIN

VIN = 5.5 V or GND

VIN = VCC or GND



µA

Quiescent supply current

ICC



Note: For devices with the ordering part number TC7WH17FK,LJ(CT.

2016-09-21

Rev.2.0

TC7WH17FK

9.4. AC Characteristics (Unless otherwise specified, Ta = 25 , Input: tr = tf = 3 ns)

Test

Condition

Characteristics

Symbol

Note

VCC (V)

CL (pF)

Min

Typ.

Max

Unit

Propagation delay time

tPLH,tPHL



3.3 ± 0.3



8.3

10.8

5.5

7.0

12.8

16.3

8.6

5.0 ± 0.5

10.6

Input capacitance

CIN



Power dissipation

capacitance

CPD

(Note 1)



Note 1: CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current

consumption without load. Average operating current can be obtained by the equation.

ICC(opr) = CPDVCCfIN + ICC/3 (per 1 gate)

9.5. AC Characteristics

(Unless otherwise specified, Ta = -40 to 85 , Input: tr = tf = 3 ns)

Characteristics

Propagation delay time

Symbol

Test Condition

VCC (V) CL (pF)

Min

Max

Unit

tPLH,tPHL



3.3 ± 0.3

1.0



15.0

18.5

10.0

12.0

5.0 ± 0.5

Input capacitance

CIN



9.6. AC Characteristics (Note)

(Unless otherwise specified, Ta = -40 to 125 , Input: tr = tf = 3 ns)

Characteristics

Propagation delay time

Symbol

Test Condition

VCC (V) CL (pF)

Min

Max

Unit

tPLH,tPHL



3.3 ± 0.3

1.0



17.0

20.5

11.5

13.5

5.0 ± 0.5

Input capacitance

CIN



Note: For devices with the ordering part number TC7WH17FK,LJ(CT.

9.7. Noise Characteristics (Unless otherwise specified, Ta = 25 , Input: tr = tf = 3 ns)

Characteristics

Symbol

Test Condition

VCC (V)

Typ.

Limit

Unit

Quiet output maximum dynamic VOL

Quiet output minimum dynamic VOL

Minimum high-level dynamic input voltage

Maximum low-level dynamic input voltage

VOLP CL = 50 pF

VOLV CL = 50 pF

VIHD CL = 50 pF

5.0

0.3

-0.3



0.8

-0.8

3.5

1.5

VILD

CL = 50 pF



2016-09-21

Rev.2.0

TC7WH17FK

Package Dimensions

Unit: mm

Weight: 0.01 g (typ.)

Package Name(s)

JEDEC: SOT-765

Nickname: US8

2016-09-21

Rev.2.0

TC7WH17FK

RESTRICTIONS ON PRODUCT USE

•

Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information

in this document, and related hardware, software and systems (collectively "Product") without notice.

This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA's

written permission, reproduction is permissible only if reproduction is without alteration/omission.

ThoughTOSHIBAworkscontinuallytoimproveProduct'squalityandreliability,Productcanmalfunctionorfail.Customersareresponsible

for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which

minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage

to property, including data loss or corruption. Before customers use the Product, create designs including the Product, or incorporate

the Product into their own applications, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA

information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the

precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for the application

with which the Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications,

including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating

and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample

application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications.

TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS.

•

PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE

EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH MAY

CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT

("UNINTENDEDUSE").Exceptforspecificapplicationsasexpresslystatedinthisdocument, UnintendedUseincludes, withoutlimitation,

equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles,

trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices,

elevators and escalators, devices related to electric power, and equipment used in finance-related fields. IF YOU USE PRODUCT FOR

UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT. For details, please contact your TOSHIBA sales

representative.

•

Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.

Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any

applicable laws or regulations.

•

The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any

infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any

intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.

ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE

FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER,

INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING

WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND

(2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT,

OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR

PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.

•

Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation,

for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products

(mass destruction weapons). Product and related software and technology may be controlled under the applicable export laws and

regulations including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration

Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all

applicable export laws and regulations.

Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.

Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,

including without limitation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES OCCURRING

AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.

2016-09-21

Rev.2.0

TC7WH17FK [TOSHIBA]

相关型号：

TC7WH240FK

TC7WH240FKTE85L

TC7WH240FK_09

TC7WH240FU

TC7WH240FUTE12L

TC7WH240FU_09

TC7WH241

TC7WH241FK

TC7WH241FK(TE85L)

TC7WH241FK(TE85L,F)

TC7WH241FK_09

TC7WH241FU