TK80A04K3L [TOSHIBA]
TRANSISTOR POWER, FET, FET General Purpose Power;型号: | TK80A04K3L |
厂家: | TOSHIBA |
描述: | TRANSISTOR POWER, FET, FET General Purpose Power 局域网 开关 脉冲 晶体管 |
文件: | 总9页 (文件大小:230K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
TK80A04K3L
MOSFETs Silicon N-channel MOS (U-MOS)
TK80A04K3L
1. Applications
•
•
•
Automotive
Switching Voltage Regulators
Motor Drivers
2. Features
(1) Low drain-source on-resistance: RDS(ON) = 1.9 mΩ (typ.) (VGS = 10 V)
(2) Low leakage current: IDSS = 10 µA (max) (VDS = 40 V)
(3) Enhancement mode: Vth = 2.0 to 3.0 V (VDS = 10 V, ID = 1 mA)
3. Packaging and Internal Circuit
1: Gate
2: Drain
3: Source
TO-220SIS
4. Absolute Maximum Ratings (Note) (Ta = 25 unless otherwise specified)
Characteristics
Symbol
Rating
Unit
V
Drain-source voltage
Gate-source voltage
Drain current (DC)
Drain current (pulsed)
Power dissipation
VDSS
VGSS
ID
40
±20
(Note 1)
(Note 1)
80
A
IDP
320
(Tc = 25)
PD
48
W
mJ
A
Single-pulse avalanche energy
Avalanche current
(Note 2)
EAS
IAR
665
80
Channel temperature
Storage temperature
(Note 3)
(Note 3)
Tch
Tstg
175
-55 to 175
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
2012-12-05
Rev.1.0
1
TK80A04K3L
5. Thermal Characteristics
Characteristics
Symbol
Max
Unit
Channel-to-case thermal resistance
Channel-to-ambient thermal resistance
Rth(ch-c)
Rth(ch-a)
3.125
62.5
/W
Note 1: Ensure that the channel temperature does not exceed 175.
Note 2: VDD = 25 V, Tch = 25 (initial), L = 108 µH, RG = 25 Ω, IAR = 80 A
Note 3: The definitions of the absolute maximum channel and storage temperatures are based on AEC-Q101.
Note: This transistor is sensitive to electrostatic discharge and should be handled with care.
2012-12-05
Rev.1.0
2
TK80A04K3L
6. Electrical Characteristics
6.1. Static Characteristics (Ta = 25 unless otherwise specified)
Characteristics
Gate leakage current
Symbol
Test Condition
Min
Typ.
Max
Unit
IGSS
IDSS
VGS = ±16 V, VDS = 0 V
±10
µA
Drain cut-off current
VDS = 40 V, VGS = 0 V
10
Drain-source breakdown voltage
Drain-source breakdown voltage (Note 4)
Gate threshold voltage
V(BR)DSS ID = 10 mA, VGS = 0 V
V(BR)DSX ID = 10 mA, VGS = -20 V
40
20
V
Vth
VDS = 10 V, ID = 1 mA
2.0
3.0
Drain-source on-resistance
RDS(ON)
VGS = 6 V, ID = 40 A
VGS = 10 V, ID = 40 A
2.3
1.9
3.5
2.4
mΩ
Note 4: If a reverse bias is applied between gate and source, this device enters V(BR)DSX mode. Note that the drain-
source breakdown voltage is lowered in this mode.
6.2. Dynamic Characteristics (Ta = 25 unless otherwise specified)
Characteristics
Input capacitance
Symbol
Test Condition
Min
Typ.
Max
Unit
pF
Ciss
Crss
Coss
tr
VDS = 10 V, VGS = 0 V, f = 1 MHz
9400
1200
1900
20
Reverse transfer capacitance
Output capacitance
Switching time (rise time)
Switching time (turn-on time)
Switching time (fall time)
Switching time (turn-off time)
See Figure 6.2.1.
ns
ton
42
tf
43
toff
158
Fig. 6.2.1 Switching Time Test Circuit
6.3. Gate Charge Characteristics (Ta = 25 unless otherwise specified)
Characteristics
Symbol
Qg
Test Condition
Min
Typ.
190
Max
Unit
nC
Total gate charge (gate-source plus
gate-drain)
VDD ≈ 32 V, VGS = 10 V, ID = 80 A
Gate-source charge
Gate-drain charge
Qgs
Qgd
127
63
6.4. Source-Drain Characteristics (Ta = 25 unless otherwise specified)
Characteristics
Reverse drain current (DC)
Symbol
Test Condition
Min
Typ.
Max
Unit
A
(Note 5)
(Note 5)
IDR
IDRP
VDSF
80
Reverse drain current (pulsed)
Diode forward voltage
320
-1.2
IDR = 80 A, VGS = 0 V
V
Reverse recovery time
trr
IDR = 80 A, VGS = 0 V
-dIDR/dt = 50 A/µs
64
48
ns
Reverse recovery charge
Qrr
nC
Note 5: Ensure that the channel temperature does not exceed 175.
2012-12-05
Rev.1.0
3
TK80A04K3L
7. Marking (Note)
Fig. 7.1 Marking
Note: A line under a Lot No. identifies the indication of product Labels.
Not underlined: [[Pb]]/INCLUDES > MCV
Underlined: [[G]]/RoHS COMPATIBLE or [[G]]/RoHS [[Pb]]
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS
compatibility of Product.
The RoHS is the Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on
the restriction of the use of certain hazardous substances in electrical and electronic equipment.
2012-12-05
Rev.1.0
4
TK80A04K3L
8. Characteristics Curves (Note)
Fig. 8.1 ID - VDS
Fig. 8.2 ID - VDS
Fig. 8.3 ID - VGS
Fig. 8.4 VDS - VGS
Fig. 8.5 RDS(ON) - ID
Fig. 8.6 RDS(ON) - Ta
2012-12-05
Rev.1.0
5
TK80A04K3L
Fig. 8.7 IDR - VDS
Fig. 8.8 Capacitance - VDS
Fig. 8.9 Vth - Ta
Fig. 8.10 Dynamic Input/Output Characteristics
Fig. 8.11 PD - Tc
(Guaranteed Maximum)
2012-12-05
Rev.1.0
6
TK80A04K3L
Fig. 8.12 rth/Rth(ch-c) - tw
(Guaranteed Maximum)
Fig. 8.13 Safe Operating Area
(Guaranteed Maximum)
Fig. 8.14 EAS - Tch
(Guaranteed Maximum)
Fig. 8.15 Test Circuit/Waveform
Note: The above characteristics curves are presented for reference only and not guaranteed by production test,
unless otherwise noted.
2012-12-05
Rev.1.0
7
TK80A04K3L
Package Dimensions
Unit: mm
Weight: 1.7 g (typ.)
Package Name(s)
TOSHIBA: 2-10U1S
Nickname: TO-220SIS
2012-12-05
Rev.1.0
8
TK80A04K3L
RESTRICTIONS ON PRODUCT USE
•
•
•
Toshiba Corporation, and its subsidiaries and affiliates (collectively "TOSHIBA"), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively "Product") without notice.
This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA's
written permission, reproduction is permissible only if reproduction is without alteration/omission.
ThoughTOSHIBAworkscontinuallytoimproveProduct'squalityandreliability,Productcanmalfunctionorfail.Customersareresponsible
for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which
minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily injury or damage
to property, including data loss or corruption. Before customers use the Product, create designs including the Product, or incorporate
the Product into their own applications, customers must also refer to and comply with (a) the latest versions of all relevant TOSHIBA
information, including without limitation, this document, the specifications, the data sheets and application notes for Product and the
precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for the application
with which the Product will be used with or for. Customers are solely responsible for all aspects of their own product design or applications,
including but not limited to (a) determining the appropriateness of the use of this Product in such design or applications; (b) evaluating
and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample
application circuits, or any other referenced documents; and (c) validating all operating parameters for such designs and applications.
TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS.
•
PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE
EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH MAY
CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT
("UNINTENDEDUSE").Exceptforspecificapplicationsasexpresslystatedinthisdocument, UnintendedUseincludes, withoutlimitation,
equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles,
trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions, safety devices,
elevators and escalators, devices related to electric power, and equipment used in finance-related fields. IF YOU USE PRODUCT FOR
UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT. For details, please contact your TOSHIBA sales
representative.
•
•
Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
•
•
The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to any
intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY WHATSOEVER,
INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR LOSS, INCLUDING
WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND LOSS OF DATA, AND
(2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO SALE, USE OF PRODUCT,
OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
•
•
Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation,
for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology products
(mass destruction weapons). Product and related software and technology may be controlled under the applicable export laws and
regulations including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration
Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in compliance with all
applicable export laws and regulations.
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES OCCURRING
AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.
2012-12-05
Rev.1.0
9
相关型号:
TK80A08K3
TRANSISTOR 80 A, 75 V, 0.0045 ohm, N-CHANNEL, Si, POWER, MOSFET, LEAD FREE, 2-10U1B, SC-67, 3 PIN, FET General Purpose PowerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
TOSHIBA
TK80D08K3
Switching Regulator ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
TOSHIBA
TK80E06K3A
Switching Voltage RegulatorsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
TOSHIBA
TK80F04K3L
Switching Voltage RegulatorsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
TOSHIBA
TK80F06K3L
Switching Voltage RegulatorsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
TOSHIBA
TK80F08K3
Swiching RegulatorWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
TOSHIBA
TK80S04K3L
MOSFETs Silicon N-channel MOS (U-MOS IV)Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
NXP
TK80S06K3L
MOSFETs Silicon N-channel MOS (U-MOS )Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
TOSHIBA
TK80X04K3
TRANSISTOR 80 A, 40 V, 0.0035 ohm, N-CHANNEL, Si, POWER, MOSFET, ROHS COMPLIANT, 2-9F1C, SC-97, 4 PIN, FET General Purpose PowerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
TOSHIBA
TK80X04K3(TE24L)
TRANSISTOR,MOSFET,N-CHANNEL,40V V(BR)DSS,80A I(D),SC-97Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 211
-
TOSHIBA
©2020 ICPDF网 联系我们和版权申明