TLOE1002 [TOSHIBA]
Visible LED, SINGLE COLOR LED, ORANGE, 1.4 mm, 2 X 1.25 MM, 1.10 HEIGHT, PLASTIC, SMD, 2 PIN;型号: | TLOE1002 |
厂家: | TOSHIBA |
描述: | Visible LED, SINGLE COLOR LED, ORANGE, 1.4 mm, 2 X 1.25 MM, 1.10 HEIGHT, PLASTIC, SMD, 2 PIN 光电 |
文件: | 总11页 (文件大小:695K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
TOS HIBA
TLG1002, TLGD1002, TLPG1002,
TLOE1002, TLYE1002, TLS1002, TLRA1002
LED SMD Lamp
Unit in mm
LED Surface Mount Device
Features
• 2.0(L) x 1.25(W) x 1.1(H) mm Size
- Small Package - High Density Mounting is Available
• Available for Automounting Machine Use
• Reflow Soldering is Applicable
• Low Drive Current, High Intensity Light Emission
- Recommended Forward Current: I = 10 mA (DC)
F
• Fast Response Time
- Capable of Pulse Operation
• High Power Luminous Intensity
• Applications:
- Telephone Cordless/Cellular
- Portable Instrument
- Backlight, etc.
Line-Up
Product Name
Color
Material
TLPG1002
TLG1002
Pure Green
Green
Green
Yellow
Orange
Red
GaP
GaP
TLGD1002
TLYE1002
TLOE1002
TLS1002
GaP
InGaAlP
InGaAlP
GaAsP
GaAlAs
TLRA1002
Red
The information contained here is subject to change without notice.
The information contained herein is presented only as guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties
which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of TOSHIBA or others. These TOSHIBA products are intended for usage in general electronic
equipments (office equipment, communication equipment, measuring equipment, domestic electrification, etc.) Please make sure that you consult with us before you use these TOSHIBA products in equip-
ments which require high quality and/or reliability, and in equipments which could have major impact to the welfare of human life (atomic energy control, spaceship, traffic signal, combustion control, all types
of safety devices, etc.). TOSHIBA cannot accept liability to any damage which may occur in case these TOSHIBA products were used in the mentioned equipments without prior consultation with TOSHIBA.
T O S H IB A C O R P O R A T IO N
1/11
TLG1002, TLGD1002, TLPG1002,
TLOE1002, TLYE1002, TLS1002, TLRA1002
Maximum Ratings (T = 25°C)
a
Forward
Current (DC) I
Reverse
Voltage
Power
Dissipation P
(mW)
Operating
Temperature
Storage
Temperature T
stg
Product Name
F
D
(mA)
V (V)
T
(°C)
(°C)
R
opr
TLPG1002
TLG1002
25
25
25
25
25
25
25
4
4
4
4
4
4
4
65.0
62.5
62.5
62.5
60.0
65.0
60.0
TLGD1002
TLYE1002
TLOE1002
TLS1002
−25 ~ 80
−30 ~ 85
TLRA1002
Electro-Optical Characteristics (T = 25°C)
a
Emission Spectrum
Luminous Intensity
Forward Voltage
Reverse Current
Product Name
λ
∆ λ
I
V
I
R
P
V
F
Typ.
Typ.
I
Min.
Typ.
I
Typ.
Max.
I
Max.
V
R
F
F
F
TLPG1002
TLG1002
TLGD1002
TLYE1002
TLOE1002
TLS1002
TLRA1002
UNIT
555
567
570
590
612
635
660
20
25
25
13
15
40
25
20
20
20
20
20
20
20
mA
0.85
2.72
4.76
27.2
27.2
1.53
15.3
2.0
9.0
20
20
20
20
20
20
20
mA
2.15
2.15
2.1
2.6
2.5
2.5
2.5
2.4
2.6
2.4
20
20
20
20
20
20
20
mA
5
5
4
4
4
4
4
4
4
V
15.0
60.0
60.0
5.0
5
2.1
50
50
50
50
µA
2.0
2.05
1.85
40.0
nm
mcd
V
2/11
T O S H IB A C O R P O R A T IO N
TLG1002, TLGD1002, TLPG1002,
TLOE1002, TLYE1002, TLS1002, TLRA1002
TLRA1002
T O S H IB A C O R P O R A T IO N
3/11
TLG1002, TLGD1002, TLPG1002,
TLOE1002, TLYE1002, TLS1002, TLRA1002
TLGD1002
4/11
T O S H IB A C O R P O R A T IO N
TLG1002, TLGD1002, TLPG1002,
TLOE1002, TLYE1002, TLS1002, TLRA1002
TLS1002
T O S H IB A C O R P O R A T IO N
5/11
TLG1002, TLGD1002, TLPG1002,
TLOE1002, TLYE1002, TLS1002, TLRA1002
TLPG1002
6/11
T O S H IB A C O R P O R A T IO N
TLG1002, TLGD1002, TLPG1002,
TLOE1002, TLYE1002, TLS1002, TLRA1002
TLG1002
T O S H IB A C O R P O R A T IO N
7/11
TLG1002, TLGD1002, TLPG1002,
TLOE1002, TLYE1002, TLS1002, TLRA1002
TLOE1002
8/11
T O S H IB A C O R P O R A T IO N
TLG1002, TLGD1002, TLPG1002,
TLOE1002, TLYE1002, TLS1002, TLRA1002
TLYE1002
T O S H IB A C O R P O R A T IO N
9/11
TLG1002, TLGD1002, TLPG1002,
TLOE1002, TLYE1002, TLS1002, TLRA1002
Taping Specifications:
Packaging
LEDs are packed in an aluminum envelope with silica gel to avoid moisture absorption. After opening the package, storage
at the following conditions is recommended since air exposure at soldering according to the moisture absorption influences
optical characteristics.
- Temperature 5 ~ 30°C
- Humidity 60% RH (MAX.)
Please execute baking if it has been 6 months under packed or 1 week under opened. Recommended baking condition:
60°C, over 12 hours.
10/11
T O S H IB A C O R P O R A T IO N
TLG1002, TLGD1002, TLPG1002,
TLOE1002, TLYE1002, TLS1002, TLRA1002
Soldering
1. Reflow soldering:
* It is recommended to use a reflow furnace of the upper and lower heater type.* The temperature profile as shown
in Fig. 1 is recommended for soldering LEDs by the reflow furnace.
2.
Post-solder cleaning:
When cleaning after soldering is needed, the following conditions must be adhered to.
– Cleaning solvents: AK225 or Alcohol
– Temperature: 50°C (122°F) MAX. for 30 seconds, or
30°C (86°F) MAX. for 3 minutes MAX.
– Ultrasonic: 300W MAX.
Precaution for Mounting
1.
2.
3.
No force to plastic part of LED when LED is under high temperature.
No friction using a hard thing to avoid injuring plastic part of LED.
No contact between LED and the other parts, when installing an assembled board into the set.
T O S H IB A C O R P O R A T IO N
11/11
相关型号:
TLOE1002A(N-T02)
Visible LED, SINGLE COLOR LED, ORANGE, 1.4 mm, 2 X 1.25 MM, 1.10 MM HEIGHT, ROHS COMPLIANT, PLASTIC, 4-1D1, 2 PIN
TOSHIBA
TLOE1002A(T02)
Visible LED, SINGLE COLOR LED, ORANGE, 1.4 mm, 2 X 1.25 MM, 1.10 MM HEIGHT, ROHS COMPLIANT, PLASTIC, 4-1D1, 2 PIN
TOSHIBA
TLOE1005A(T03)
Visible LED, T-3/4 SINGLE COLOR LED, ORANGE, 2 mm, 3.20 X 2.40 MM, 2.40 MM HEIGHT, SURFACE MOUNT PACKAGE-2
TOSHIBA
©2020 ICPDF网 联系我们和版权申明