TLP160J(F) [TOSHIBA]
Optocoupler - Trigger Device Output, 1 CHANNEL TRIAC OUTPUT OPTOCOUPLER, LEAD FREE, 11-4C3, SOP-6/4 PIN;型号: | TLP160J(F) |
厂家: | TOSHIBA |
描述: | Optocoupler - Trigger Device Output, 1 CHANNEL TRIAC OUTPUT OPTOCOUPLER, LEAD FREE, 11-4C3, SOP-6/4 PIN 三端双向交流开关 输出元件 |
文件: | 总6页 (文件大小:194K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
TLP160J
TOSHIBA Photocoupler GaAs Ired & Photo−Triac
TLP160J
Triac Drive
Unit in mm
Programmable Controllers
AC−Output Module
Solid State Relay
The TOSHIBA mini flat coupler TLP160J is a small outline coupler,
suitable for surface mount assembly.
The TLP160J consists of a photo triac, optically coupled to a gallium
arsenide infrared emitting diode.
•
•
•
•
•
Peak off−state voltage: 600 V (min.)
Trigger LED current: 10 mA (max.)
On−state current: 70 mA (max.)
Isolation voltage: 2500 Vrms (min.)
UL recognized: UL1577, file No. E67349
TOSHIBA
11−4C3
Trigger LED Current
Weight: 0.09 g (typ.)
Trigger LED Current (mA)
V =6V, Ta=25°C
Classi−
fication*
Marking Of
Classification
T
Min.
Max.
Pin Configurations
(IFT7)
―
―
7
T7
Standard
10
T7, blank
6
4
1
3
*Ex. (IFT7); TLP160J (IFT7)
(Note) Application type name for certification test, please
use standard product type name, i.e.
TLP160J (IFT7): TLP160J
1. Anode
3. Cathode
4. Terminal 1
6. Terminal 2
1
2010-10-01
TLP160J
Absolute Maximum Ratings (Ta = 25°C)
Characteristic
Symbol
Rating
Unit
Forward current
I
50
−0.7
1
mA
F
Forward current derating (Ta ≥ 53°C)
Peak forward current (100 μs pulse, 100 pps)
Reverse voltage
ΔI / °C
F
mA / °C
I
A
V
FP
V
5
R
Junction temperature
T
125
600
70
°C
V
j
Off−state output terminal voltage
V
DRM
Ta=25°C
On−state RMS current
Ta=70°C
I
mA
T(RMS)
40
On−state current derating (Ta ≥ 25°C)
ΔI / °C
−0.67
2
mA / °C
A
T
Peak on−state current (100μs pluse, 120pps)
I
TP
Peak nonrepetitive surge current
(PW=10ms)
I
1.2
A
TSM
Junction temperature
Storage temperature range
T
115
−55 to 125
−40 to 100
260
°C
°C
j
T
stg
opr
Operating temperature range
Lead soldering temperature (10 s)
T
°C
T
sol
°C
Isolation voltage (AC, 1 min., R.H. ≤ 60%)
(Note)
BV
2500
Vrms
S
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
(Note) Device considered a two terminal device: Pins 1 and 3 shorted together and pins 4 and 6 shorted together.
Recommended Operating Conditions
Characteristic
Symbol
Min.
Typ.
Max.
Unit
Supply voltage
Forward current
V
―
15
―
20
―
―
240
25
1
Vac
mA
A
AC
I
F
Peak on−state current
I
―
TP
Operating temperature
T
opr
−25
85
°C
Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the
device. Additionally, each item is an independent guideline respectively. In developing designs using this
product, please confirm specified characteristics shown in this document.
2
2010-10-01
TLP160J
Individual Electrical Characteristics (Ta = 25°C)
Characteristic
Forward voltage
Symbol
Test Condition
= 10 mA
F
Min.
Typ.
Max.
Unit
V
I
1.0
―
―
―
―
―
1.15
―
1.3
10
V
μA
pF
nA
V
F
Reverse current
I
V = 5 V
R
R
Capacitance
C
V = 0, f = 1 MHz
= 600 V
30
―
T
Peak off−state current
Peak on−state voltage
Holding current
I
V
10
1000
2.8
―
DRM
DRM
= 70 mA
TM
V
I
1.7
1.0
TM
I
―
mA
H
Critical rate of rise
of off−state voltage
dv / dt
V
= 240 Vrms, Ta = 85°C (Fig.1)
―
―
500
0.2
―
―
V / μs
V / μs
in
Critical rate of rise
of commutating voltage
dv / dt(c)
I
= 15 mA, V = 60 Vrms (Fig.1)
in
T
Coupled Electrical Characteristics (Ta = 25°C)
Characteristic
Trigger LED current
Symbol
Test Condition
Min.
Typ.
Max.
Unit
I
V
V
V
= 6 V
―
―
5
10
―
―
―
―
―
mA
pF
Ω
FT
T
S
S
Capacitance input to output
Isolation resistance
C
R
= 0, f = 1 MHz
0.8
S
S
= 500 V, R.H. ≤ 60%
1×1012
2500
―
1014
AC, 1 minute
―
Vrms
Vdc
μs
Isolation voltage
BV
S
AC, 1 second, in oil
DC, 1 minute, in oil
5000
5000
―
V
= 6→4V, R = 100Ω
L
D
Turn−on time
t
―
30
100
ON
I
F
= rated I × 1.5
FT
Fig.1 dv / dt test circuit
Rin
Vin
5V,VCC
+
1
3
6
4
VCC
120Ω
0V
~
-
RL
4kΩ
dV / dt (c)
dV / dt
3
2010-10-01
TLP160J
I
– Ta
I
– Ta
T(RMS)
F
60
50
40
30
20
10
120
100
80
60
40
20
0
0
-20
120
40
80
100
0
20
60
20
120
40
80
100
-20
0
60
Ambient temperature Ta (°C)
Ambient temperature Ta (°C)
I
– D
I
– V
F
FP
R
F
3000
100
Ta = 25°C
Pulse width ≤ 100 μs
50
30
Ta = 25°C
1000
500
10
5
3
100
50
1
0.5
0.3
30
10
0.1
0.6
100
0.8
1.2
1.4
1.6
2.0
3
2
1
10-
3
10-
3
10-
3
3
1.0
Duty cycle ratio
D
Forward voltage
V
(V)
R
F
ΔV / ΔTa – I
I – V
FP FP
F
F
-3.2
1000
500
300
-2.8
-2.4
-2.0
-1.6
-1.2
100
50
30
10
Pulse width ≤ 10 μs
Repetitive frequency
= 100 Hz
5
3
-0.8
-0.4
Ta = 25°C
1
0.6
0.1
0.3
1
3
10
30 50
1.0
1.4
2.2
2.6
3.0
1.8
Forward current
I
(mA)
Pulse forward voltage
V
(V)
F
FP
4
2010-10-01
TLP160J
Normalized I – Ta
Normalized I – Ta
FT
H
3
2
3
2
V
=6V
T
1.2
1
1.2
1
0.5
0.3
0.5
0.3
0.1
-40
0.1
-40
-20
0
20
40
60
80
100
20
60
80
-20
0
40
100
Ambient temperature Ta (°C)
Ambient temperature Ta (°C)
Normalized V
– Ta
Normalized I
– Ta
DRM
DRM
103
1.4
1.2
1.0
0.8
0.6
0.4
0.2
V
=Rated
DRM
102
101
100
0
-40
-20
0
20
40
60
80
100
0
20
40
60
80
100
Ambient temperature Ta (°C)
Ambient temperature Ta (°C)
Normalized LED Current
-LED Current Pulse Width
10
5
3
2
1.8
1.6
1.4
1.2
1
10
300 500
30
50
100
1000
Led current pulse width
P
(μs)
w
5
2010-10-01
TLP160J
RESTRICTIONS ON PRODUCT USE
•
•
•
Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively “Product”) without notice.
This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.
Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the
Product, or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of
all relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes
for Product and the precautions and conditions set forth in the “TOSHIBA Semiconductor Reliability Handbook” and (b) the
instructions for the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their
own product design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such
design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts,
diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating
parameters for such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR
APPLICATIONS.
•
Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring
equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.
Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or
reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious
public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used
in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling
equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric
power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this
document.
•
•
Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
•
•
The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
•
•
GaAs (Gallium Arsenide) is used in Product. GaAs is harmful to humans if consumed or absorbed, whether in the form of dust or
vapor. Handle with care and do not break, cut, crush, grind, dissolve chemically or otherwise expose GaAs in Product.
Do not use or otherwise make available Product or related software or technology for any military purposes, including without
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile
technology products (mass destruction weapons). Product and related software and technology may be controlled under the
Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product
or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.
•
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of
noncompliance with applicable laws and regulations.
6
2010-10-01
相关型号:
TLP160J(IFT7)
Optocoupler - Trigger Device Output, 1 CHANNEL TRIAC OUTPUT OPTOCOUPLER, 11-4C3, SO-6
TOSHIBA
TLP160J(IFT7,F)
Optocoupler - Trigger Device Output, 1 CHANNEL TRIAC OUTPUT OPTOCOUPLER, LEAD FREE, 11-4C3, SO-6
TOSHIBA
©2020 ICPDF网 联系我们和版权申明