TLP160J(IFT7,U,C,F [TOSHIBA]

Triac Output Optocoupler;


型号：	TLP160J(IFT7,U,C,F
厂家：	TOSHIBA
描述：	Triac Output Optocoupler 三端双向交流开关输出元件光电
文件：	总6页 (文件大小：342K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

TLP160J

TOSHIBA Photocoupler GaAs Ired & Photo-Triac

TLP160J

Triac Drive

Programmable Controllers

AC-Output Module

Unit: mm

Solid State Relay

The TOSHIBA mini flat coupler TLP160J is a small outline coupler, suitable

for surface mount assembly.

The TLP160J consists of a photo triac, optically coupled to a gallium

arsenide infrared emitting diode.

•

Peak off-state voltage: 600 V (min)

Trigger LED current: 10 mA (max)

On-state current: 70 mA (max)

Isolation voltage: 2500 Vrms (min)

UL approved: UL1577, File No.E67349

cUL approved :CSA Component Acceptance Service

No. 5A, File No.E67349

•

Option (V4) VDE approved : EN60747-5-5 (Note 1)

TOSHIBA

11-4C3

Note 1: When a EN60747-5-5 approved type is needed,

Weight: 0.09 g (typ.)

please designate “Option(V4)”

Trigger LED Current

Trigger LED Current (mA)

V =6V, Ta=25°C

Classification

(Note 1)

Marking of

Classification

Pin Configurations

(top view)

Min

Max

(IFT7)

―

7.0

Standard

T7, blank

Note 1:Ex.(IFT7); TLP160J (IFT7)

Note: Application type name for certification test, please

use standard product type name, i.e.

TLP160J(IFT7): TLP160J

1. Anode

3. Cathode

4. Triac Terminal

6. Triac Terminal

Start of commercial production

1988-04

2017-07-10

TLP160J

Absolute Maximum Ratings (Ta = 25°C)

Characteristic

Symbol

Rating

Unit

Forward current

Forward current derating (Ta ≥ 53°C)

Peak forward current (100 μs pulse, 100 pps)

Reverse voltage

ΔI / °C

-0.7

mA / °C

100

-1.4

125

600

mW/°C

°C

Diode power dissipation

ΔP /°C

Diode power dissipation derating (Ta ≥ 53°C)

Junction temperature

Off-state output terminal voltage

DRM

Ta=25°C

On-state RMS current

Ta=70°C

T(RMS)

On-state current derating (Ta ≥ 25°C)

ΔI / °C

-0.67

mA / °C

Peak on-state current (100μs pulse, 120pps)

Peak nonrepetitive surge current

(P =10ms)

1.2

TSM

P_O

Output power dissipation

200

-2.0

mW / °C

°C

Output power dissipation derating (Ta ≥ 25°C)

Junction temperature

ΔP_O/ °C

115

Storage temperature range

-55 to 125

-40 to 100

260

°C

stg

opr

Operating temperature range

°C

Lead soldering temperature (10 s)

Isolation voltage (AC, 1 minute, R.H. ≤ 60%)

°C

sol

(Note 1)

2500

Vrms

Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the

significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if

the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum

ratings.

Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook

(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test

report and estimated failure rate, etc.).

Note 1: Device considered a two terminal device: Pins 1 and 3 shorted together and pins 4 and 6 shorted together.

Recommended Operating Conditions

Characteristic

Symbol

Min

Typ.

Max

Unit

Supply voltage

Forward current

―

240

Vac

Peak on-state current

Operating temperature

-25

°C

opr

Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the

device. Additionally, each item is an independent guideline respectively. In developing designs using this

product, please confirm specified characteristics shown in this document.

2017-07-10

TLP160J

Electrical Characteristics (Ta = 25°C)

Characteristic

Forward voltage

Symbol

Test Condition

= 10 mA

Min

Typ.

Max

Unit

1.0

―

1.15

―

1.3

μA

Reverse current

Capacitance

V = 5 V

VF = 0 V, f = 1 MHz

= 600 V

―

Peak off-state current

Peak on-state voltage

Holding current

1000

2.8

―

DRM

= 70 mA

1.7

1.0

―

Critical rate of rise

of off-state voltage

dv / dt

= 240 Vrms, Ta = 85°C (Fig.1)

―

500

0.2

―

V / μs

Critical rate of rise

of commutating voltage

dv / dt(c)

I = 15 mA, V = 60 Vrms (Fig.1)

T in

Coupled Electrical Characteristics (Ta = 25°C)

Characteristic

Trigger LED current

Symbol

Test Condition

Min

Typ.

Max

Unit

= 6 V

―

Capacitance input to output

Isolation resistance

= 0 V, f = 1 MHz

0.8

= 500 V, R.H. ≤ 60%

1×10

2500

―

AC, 60 s

―

Vrms

Vdc

μs

Isolation voltage

AC, 1 s, in oil

DC, 60 s, in oil

5000

―

= 6→4V, R = 100Ω

Turn-on time

―

100

= rated I × 1.5

Fig.1 dv / dt test circuit

R_in

V_in

5V, V_CC

V_CC

120Ω

～

R_L

4kΩ

dv / dt (c)

dv / dt

2017-07-10

TLP160J

– Ta

T(RMS)

120

100

120

100

-20

120

-20

100

Ambient temperature Ta (°C)

– D

– V

3000

100

Ta = 25°C

Pulse width ≤ 100 μs

Ta = 25°C

1000

500

100

0.5

0.3

0.1

0.6

10⁰

0.8

1.2

1.4

1.6

2.0

10^-3

10^-2

10^-1

1.0

Forward voltage

(V)

Duty cycle ratio

ΔV / ΔTa – I

– V

FP FP

-3.2

1000

500

300

-2.8

-2.4

-2.0

-1.6

-1.2

100

Pulse width ≤ 10 μs

Repetitive frequency

= 100 Hz

-0.8

-0.4

Ta = 25°C

0.6

0.3

30 50

1.0

1.4

2.2

1.8

2.6

3.0

0.1

Forward current

(mA)

Pulse forward voltage

(V)

2017-07-10

TLP160J

Normalized I – Ta

V ＝6V

1.2

0.5

0.3

0.5

0.3

0.1

-40

0.1

-40

-20

100

-20

100

Ambient temperature Ta (°C)

Normalized V

– Ta

Normalized I

– Ta

DRM

10³

1.4

DRM

=Rated

1.2

1.0

0.8

0.6

0.4

0.2

10²

10¹

10⁰

100

-40

-20

100

Ambient temperature Ta (°C)

Normalized LED Current

-LED Current Pulse Width

1.8

1.6

1.4

1.2

300 500

100

1000

Led current pulse width

(μs)

2017-07-10

TLP160J

RESTRICTIONS ON PRODUCT USE

Toshiba Corporation and its subsidiaries and affiliates are collectively referred to as “TOSHIBA”.

Hardware, software and systems described in this document are collectively referred to as “Product”.

• TOSHIBA reserves the right to make changes to the information in this document and related Product without notice.

• This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with

TOSHIBA's written permission, reproduction is permissible only if reproduction is without alteration/omission.

• Though TOSHIBA works continually to improve Product's quality and reliability, Product can malfunction or fail. Customers are

responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and

systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily

injury or damage to property, including data loss or corruption. Before customers use the Product, create designs including the Product,

or incorporate the Product into their own applications, customers must also refer to and comply with (a) the latest versions of all

relevant TOSHIBA information, including without limitation, this document, the specifications, the data sheets and application notes for

Product and the precautions and conditions set forth in the "TOSHIBA Semiconductor Reliability Handbook" and (b) the instructions for

the application with which the Product will be used with or for. Customers are solely responsible for all aspects of their own product

design or applications, including but not limited to (a) determining the appropriateness of the use of this Product in such design or

applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams,

programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operating parameters for

such designs and applications. TOSHIBA ASSUMES NO LIABILITY FOR CUSTOMERS' PRODUCT DESIGN OR APPLICATIONS.

•

PRODUCT IS NEITHER INTENDED NOR WARRANTED FOR USE IN EQUIPMENTS OR SYSTEMS THAT REQUIRE

EXTRAORDINARILY HIGH LEVELS OF QUALITY AND/OR RELIABILITY, AND/OR A MALFUNCTION OR FAILURE OF WHICH

MAY CAUSE LOSS OF HUMAN LIFE, BODILY INJURY, SERIOUS PROPERTY DAMAGE AND/OR SERIOUS PUBLIC IMPACT

("UNINTENDED USE"). Except for specific applications as expressly stated in this document, Unintended Use includes, without

limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for

automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or explosions,

safety devices, elevators and escalators, devices related to electric power, and equipment used in finance-related fields. IF YOU USE

PRODUCT FOR UNINTENDED USE, TOSHIBA ASSUMES NO LIABILITY FOR PRODUCT. For details, please contact your

TOSHIBA sales representative.

• Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.

• Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any

applicable laws or regulations.

• The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any

infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to

any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.

•

ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE

FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY

WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR

LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND

LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO

SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS

FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.

• GaAs (Gallium Arsenide) is used in Product. GaAs is harmful to humans if consumed or absorbed, whether in the form of dust or vapor.

Handle with care and do not break, cut, crush, grind, dissolve chemically or otherwise expose GaAs in Product.

• Do not use or otherwise make available Product or related software or technology for any military purposes, including without limitation,

for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile technology

products (mass destruction weapons). Product and related software and technology may be controlled under the applicable export

laws and regulations including, without limitation, the Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export

Administration Regulations. Export and re-export of Product or related software or technology are strictly prohibited except in

compliance with all applicable export laws and regulations.

• Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.

Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,

including without limitation, the EU RoHS Directive. TOSHIBA ASSUMES NO LIABILITY FOR DAMAGES OR LOSSES

OCCURRING AS A RESULT OF NONCOMPLIANCE WITH APPLICABLE LAWS AND REGULATIONS.

2017-07-10

TLP160J(IFT7,U,C,F [TOSHIBA]

相关型号：

TLP160J(IFT7-TPL)

TLP160J(IFT7-TPL,F)

TLP160J(L)

TLP160J(R)

TLP160J(TPL)

TLP160J(TPL,F)

TLP160J(TPR)

TLP160J(TPR,U,C,F)

TLP160J_07

TLP161G

TLP161G(F)

TLP161G(IFT5)