TLP525G [TOSHIBA]

TOSHIBA Photocoupler GaAs IRed & Photo−Triac; 东芝光电耦合的GaAs红外发光二极管和光电可控硅


型号：	TLP525G
厂家：	TOSHIBA
描述：	TOSHIBA Photocoupler GaAs IRed & Photo−Triac 东芝光电耦合的GaAs红外发光二极管和光电可控硅可控硅光电二极管
文件：	总6页 (文件大小：580K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

TLP525G,TLP525G−2,TLP525G−4

TOSHIBA Photocoupler GaAs IRed & Photo−Triac

TLP525G,TLP525G−2,TLP525G−4

Triac Drive

Unit in mm

Programmable Controllers

AC−Output Module

Solid State Relay

The TOSHIBA TLP525G, −2 and −4 consist of a photo−triac optically

coupled to a gallium arsenide infrared emitting diode.

The TLP525G−2 offers two isolated channels in an eight lead plastic

DIP package, while the TLP525G−4 provides four isolated channels in a

sixteenn lead plastic DIP package.

Peak off−stage voltage: 400V (min.)

Trigger LED current: 10mA (max.)

Peak on−stage current: 2Apk (max.)

TOSHIBA

11−5B2

Weight: 0.26g

Isolation voltage: 2500V

(min.)

UL recognized: File no.E67349

rms

Pin Configurations (top view)

TOSHIBA

11−10C4

Weight: 0.54g

TOSHIBA

11−20A3

Weight: 1.1g

2002-09-25

TLP525G,TLP525G−2,TLP525G−4

Maximum Ratings (Ta = 25°C)

Rating

Characteristic

Symbol

Unit

TLP525G-2

TLP525G-4

TLP525G

Forward current

Forward current derating

Pulse forward current

Reverse voltage

/ °C

-0.7 (Ta ≥ 53°C)

-0.5 (Ta ≥ 25°C)

mA / °C

1 (100µs pulse, 100pps)

Junction temperature

125

°C

Off-state output terminal

400

DRM

voltage

Ta = 25°C

100

On-state RMS

T (RMS)

current

Ta = 70°C

On-state current derating

(Ta≥25°C)

/ °C

-1.1

-0.9

mA / °C

Peak on state current

2 (100µs pulse, 120pps)

1.2

Peak nonrepetitive surge

TSM

current (P = 10ms, DC = 10%)

Junction temperature

Storage temperature range

Operating temperature range

Lead soldering temperature

Isolation voltage

115

-55~125

°C

stg

opr

-40~100

260 (10s)

sol

(Note)

2500 (AC, 1min., R.H. ≤ 60%)

rms

(Note) Device considered a two terminal device: LED side pins shorted together and detector side pins shorted

together.

Recommended Operating Conditions

Characteristic

Symbol

Min.

Typ.

Max.

Unit

Supply voltage

―

120

Vac

Forward current

Peak on-state current

Operating temperature

―

-25

°C

opr

2002-09-25

TLP525G,TLP525G−2,TLP525G−4

Individual Electrical Characteristics (Ta = 25°C)

Characteristic

Forward voltage

Symbol

Test Condition

= 10mA

Min.

Typ.

Max.

Unit

1.0

―

1.15

―

1.3

µA

Reverse current

Capacitance

V = 5V

V = 0, f = 1MHz

―

= 400V

DRM

100

3.0

―

Peak off-state current

Peak on-state voltage

Holding current

DRM

= 100mA

1.7

0.2

Critical rate of rise

= 120V , Ta = 85°C

―

rms

dv / dt

200

500

0.2

V / µs

of off-state voltage

(Figure 1)

= 30V , I = 15mA

Critical rate of rise

rms

dv / dt (c)

―

of commutating voltage

(Figure 1)

Coupled Electrical Characteristics (Ta = 25°C)

Characteristic

Symbol

Test Condition

Min.

Typ.

Max.

Unit

Trigger LED current

= 3V

―

Ω

Capacitance input to output

Isolation resistance

= 0, f = 1MHz

= 500V, R.H. ≤ 60%

0.8

5´10

AC, 1 minute

2500

―

Vrms

Vdc

AC, 1 second, in oil

DC, 1 minute, in oil

5000

Isolation voltage

―

Fig.1 dv / dt Test Circuit

2002-09-25

TLP525G,TLP525G−2,TLP525G−4

2002-09-25

TLP525G,TLP525G−2,TLP525G−4

2002-09-25

TLP525G,TLP525G−2,TLP525G−4

RESTRICTIONS ON PRODUCT USE

000707EAA

· TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor

devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical

stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of

safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of

such TOSHIBA products could cause loss of human life, bodily injury or damage to property.

In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as

set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and

conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability

Handbook” etc..

· The TOSHIBA products listed in this document are intended for usage in general electronics applications

(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,

etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires

extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or

bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or

spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,

medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this

document shall be made at the customer’s own risk.

· The information contained herein is presented only as a guide for the applications of our products. No

responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other

rights of the third parties which may result from its use. No license is granted by implication or otherwise under

any intellectual property or other rights of TOSHIBA CORPORATION or others.

· The information contained herein is subject to change without notice.

2002-09-25

相关型号：