TLP627(TP1) [TOSHIBA]
Optocoupler - Transistor Output, 1 CHANNEL DARLINGTON OUTPUT OPTOCOUPLER, PLASTIC, DIP-4;
| 型号： | TLP627(TP1) |
| 厂家： | 
TOSHIBA |
| 描述： | Optocoupler - Transistor Output, 1 CHANNEL DARLINGTON OUTPUT OPTOCOUPLER, PLASTIC, DIP-4 输出元件 光电 |
| 文件： | 总8页 (文件大小：736K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
TLP627,TLP627-2,TLP627-4
TOSHIBA Photocoupler GaAs IRED & Photo-Transistor
TLP627,TLP627-2,TLP627-4
Programmable Controllers
Unit in mm
DC-output Module
Telecommunication
The TOSHIBA TLP627,-2 and -4 consists of a gallium arsenide infrared
emitting diode optically coupled to a darlington connected phototransistor
which has an integral base-emitter resistor to optimize switching speed and
elevated temperature characteristics.
The TLP627-2 offers two isolated channels in a eight lead plastic DIP,
while the TLP627-4 provide four isolated channels per package.
TOSHIBA
11−5B2
z
z
z
z
Collector-Emitter Voltage
Current Transfer Ratio
Isolation Voltage
: 300V(Min)
: 1000%(Min)
: 5000Vrms(Min)
: UL1577,File No.E67349
Weight: 0.26 g (typ.)
UL Recognized
Made in Japan
Made in Thailand
UL Recognized
E67349
*1
*2
E152349
*1
*2
BSI Approved
7426, 7427
7426, 7427
*1 UL1577
*2 BS EN60065: 2002, BS EN60950-1: 2002
Pin Configuration (top view)
TLP627-2
TOSHIBA
11−10C4
TLP627-4
TLP627
Weight: 0.54 g (typ.)
1
2
4
3
1
8
1
16
2
3
7
6
2
3
15
14
1: ANODE
2: CATHODE
3: EMITTER
4:COLLECTOR
4
5
4
5
13
12
1,3: ANODE
2,4: CATHODE
5,7: EMITTER
6
7
11
10
6,8:COLLECTOR
8
9
1,3,5,7
2,4,6,8
: ANODE
: CATHODE
TOSHIBA
11−20A3
9,11,13,15 : EMITTER
10,12,14,16 :COLLECTOR
Weight: 1.1 g (typ.)
1
2007-10-01
TLP627,TLP627-2,TLP627-4
Absolute Maximum Ratings (Ta=25°C)
Rating
Characteristics
Symbol
Unit
mA
TLP627-2
TLP627-4
TLP627
60
Forward Current
IF
∆IF /°C
IFP
50
Forward Current Derating
Pulse Forward Current
Power Dissipation
−0.7(Ta≥39°C) −0.5(Ta≥25°C) mA /°C
1(100μs pulse,100pps)
A
mW
mW /°C
V
(1 Circuit)
PD
100
-1.0
70
Power Dissipation Derating (Ta≥25°C,1 Circuit)
Reverse Voltage
∆ PD /°C
VR
-0.7
5
Junction Temperature
Tj
125
300
°C
Collector-Emitter Voltage
VCEO
V
Emitter -Collector Voltage
Collector Current
VECO
IC
0.3
V
150
mA
Collector Power Dissipation
(1 Circuit)
PC
150(*300)
-1.5(*-3.5)
100
-1.0
mW
mW /°C
°C
Collector Power Dissipation Derating
Junction Temperature
(Ta≥25°C,1 Circuit) ∆ Pc /°C
Tj
125
Operating Temperature Range
Storage Temperature Range
Topr
Tstg
Tsold
PT
−55~100
−55~125
°C
°C
Lead Soldering Temperature (10s)
Total Package Power Dissipation
Total Package Power Dissipation Derating
260(10sec)
°C
250(*320)
-2.5(*-3.2)
150
-1.5
mW
(Ta≥25°C,1 Circuit)
∆ PT/°C
mW /°C
Vrms
Isolation Voltage
(AC,1min. , R.H.≤60%)
(Note1)
BVS
5000
*IF=20mA Max
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
(Note1)Device considered a two terminal device : LED side pins Shorted together and DETECTOR side pins shorted
together.
Recommended Operating Conditions
Characteristics
Supply Voltage
Symbol
Min.
Typ.
Max.
Unit
VCC
IF
—
—
—
16
—
—
200
25
V
Forward Current
mA
mA
°C
Collector Current
IC
—
120
85
Operating Temperature
Topr
−25
Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the
device. Additionally, each item is an independent guideline respectively. In developing designs using this
product, please confirm specified characteristics shown in this document.
2
2007-10-01
TLP627,TLP627-2,TLP627-4
Individual Electrical Characteristics (Ta=25°C)
Characteristics
Symbol
Test Condition
Min.
Typ.
Max.
Unit
Forward Voltage
Reverse Current
Capacitance
VF
IR
IF = 10 mA
VR = 5 V
1.0
—
1.15
—
1.3
10
—
V
μA
pF
CT
V = 0 , f=1MHz
—
30
Collector-Emitter
V(BR)CEO IC = 0.1mA
V(BR)ECO IE = 0.1mA
300
0.3
—
—
—
—
V
V
Breakdown Voltage
Emitter-Collector
Breakdown Voltage
VCE = 200V
ICEO
—
—
10
—
200
20
nA
Collector Dark Current
V
CE = 200V , Ta = 85°C
μA
Capacitance Collector
to Emitter
CCE
V=0 , f=1MHz
—
10
—
pF
Coupled Electrical Characteristics (Ta=25°C)
Characteristics
Current Transfer Ratio
Symbol
Test Condition
IF=1mA , VCE=1V
Min.
Typ.
Max.
Unit
IC/IF
1000
500
—
4000
—
—
—
%
%
Saturated CTR
IC/IF(sat)
IF=10mA , VCE=1V
IC=10mA , IF=1mA
IC=100mA , IF=10mA
—
1.0
1.2
Collector-Emitter
V
CE(sat)
V
Saturation Voltage
0.3
—
Isolation Electrical Characteristics (Ta=25°C)
Characteristics
Symbol
Test Condition
VS=0 , f=1MHz
Min.
Typ.
Max.
Unit
Capacitance Input to Output
Isolation Resistance
CS
RS
—
5×1010
5000
—
0.8
1014
—
—
—
—
—
pF
VS=500V , R.H.≤60%
AC, 1minute
Ω
—
Vrms
Vdc
Isolation Voltage
BVs
AC, 1second, in oil
DC, 1 minute, in oil
10000
10000
—
3
2007-10-01
TLP627,TLP627-2,TLP627-4
Switching Characteristics (Ta=25°C)
Characteristics
Symbol
Test Condition
Min.
Typ.
Max.
Unit
Rise Time
Fall Time
tr
tf
—
—
—
—
—
—
—
40
15
50
15
5
—
—
—
—
—
—
—
V
CC=10V
IC=10mA
Turn-on Time
Turn-off Time
Turn-on Time
Strage Time
Turn-off Time
ton
toff
tON
ts
RL=100Ω
μs
RL=180Ω (Fig.1)
40
80
VCC=10V , IF=16mA
tOFF
Fig.1 Switching Time Test Circuit
VCC
VCE
IF
RL
IF
VCC
VCE
9V
ts
1V
tON
tOFF
4
2007-10-01
TLP627,TLP627-2,TLP627-4
5
2007-10-01
TLP627,TLP627-2,TLP627-4
6
2007-10-01
TLP627,TLP627-2,TLP627-4
7
2007-10-01
TLP627,TLP627-2,TLP627-4
RESTRICTIONS ON PRODUCT USE
•
•
•
Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information
in this document, and related hardware, software and systems (collectively “Product”) without notice.
This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with
TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission.
Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are
responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and
systems which minimize risk and avoid situations in which a malfunction or failure of Product could cause loss of human life, bodily
injury or damage to property, including data loss or corruption. Before creating and producing designs and using, customers must
also refer to and comply with (a) the latest versions of all relevant TOSHIBA information, including without limitation, this document,
the specifications, the data sheets and application notes for Product and the precautions and conditions set forth in the “TOSHIBA
Semiconductor Reliability Handbook” and (b) the instructions for the application that Product will be used with or for. Customers are
solely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the
appropriateness of the use of this Product in such design or applications; (b) evaluating and determining the applicability of any
information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other
referenced documents; and (c) validating all operating parameters for such designs and applications. TOSHIBA ASSUMES NO
LIABILITY FOR CUSTOMERS’ PRODUCT DESIGN OR APPLICATIONS.
•
Product is intended for use in general electronics applications (e.g., computers, personal equipment, office equipment, measuring
equipment, industrial robots and home electronics appliances) or for specific applications as expressly stated in this document.
Product is neither intended nor warranted for use in equipment or systems that require extraordinarily high levels of quality and/or
reliability and/or a malfunction or failure of which may cause loss of human life, bodily injury, serious property damage or serious
public impact (“Unintended Use”). Unintended Use includes, without limitation, equipment used in nuclear facilities, equipment used
in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling
equipment, equipment used to control combustions or explosions, safety devices, elevators and escalators, devices related to electric
power, and equipment used in finance-related fields. Do not use Product for Unintended Use unless specifically permitted in this
document.
•
•
Do not disassemble, analyze, reverse-engineer, alter, modify, translate or copy Product, whether in whole or in part.
Product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any
applicable laws or regulations.
•
•
The information contained herein is presented only as guidance for Product use. No responsibility is assumed by TOSHIBA for any
infringement of patents or any other intellectual property rights of third parties that may result from the use of Product. No license to
any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise.
ABSENT A WRITTEN SIGNED AGREEMENT, EXCEPT AS PROVIDED IN THE RELEVANT TERMS AND CONDITIONS OF SALE
FOR PRODUCT, AND TO THE MAXIMUM EXTENT ALLOWABLE BY LAW, TOSHIBA (1) ASSUMES NO LIABILITY
WHATSOEVER, INCLUDING WITHOUT LIMITATION, INDIRECT, CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES OR
LOSS, INCLUDING WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF OPPORTUNITIES, BUSINESS INTERRUPTION AND
LOSS OF DATA, AND (2) DISCLAIMS ANY AND ALL EXPRESS OR IMPLIED WARRANTIES AND CONDITIONS RELATED TO
SALE, USE OF PRODUCT, OR INFORMATION, INCLUDING WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, ACCURACY OF INFORMATION, OR NONINFRINGEMENT.
•
•
GaAs (Gallium Arsenide) is used in Product. GaAs is harmful to humans if consumed or absorbed, whether in the form of dust or
vapor. Handle with care and do not break, cut, crush, grind, dissolve chemically or otherwise expose GaAs in Product.
Do not use or otherwise make available Product or related software or technology for any military purposes, including without
limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biological weapons or missile
technology products (mass destruction weapons). Product and related software and technology may be controlled under the
Japanese Foreign Exchange and Foreign Trade Law and the U.S. Export Administration Regulations. Export and re-export of Product
or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations.
•
Please contact your TOSHIBA sales representative for details as to environmental matters such as the RoHS compatibility of Product.
Please use Product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances,
including without limitation, the EU RoHS Directive. TOSHIBA assumes no liability for damages or losses occurring as a result of
noncompliance with applicable laws and regulations.
8
2007-10-01
相关型号：
TLP627(TP5)
Optocoupler - Transistor Output, 1 CHANNEL DARLINGTON OUTPUT OPTOCOUPLER, PLASTIC, DIP-4
TOSHIBA
TLP627-2(LF2)
Optocoupler - Transistor Output, 2 CHANNEL DARLINGTON OUTPUT OPTOCOUPLER, PLASTIC, DIP-8
TOSHIBA
TLP627-2(LF5)
Optocoupler - Transistor Output, 2 CHANNEL DARLINGTON OUTPUT OPTOCOUPLER, PLASTIC, DIP-8
TOSHIBA
TLP627-3
Optocoupler - Transistor Output, 3 CHANNEL DARLINGTON OUTPUT OPTOCOUPLER, PLASTIC, DIP-12
TOSHIBA
TLP627-4(LF2)
Optocoupler - Transistor Output, 4 CHANNEL DARLINGTON OUTPUT OPTOCOUPLER, PLASTIC, DIP-16
TOSHIBA
TLP627-4(LF4)
Optocoupler - Transistor Output, 4 CHANNEL DARLINGTON OUTPUT OPTOCOUPLER, PLASTIC, DIP-16
TOSHIBA
©2020 ICPDF网 联系我们和版权申明