TEN40-2423N [TRACOPOWER]

DC/DC Converters;


型号：	TEN40-2423N
厂家：	TRACO ELECTRONIC AG
描述：	DC/DC Converters
文件：	总4页 (文件大小：289K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

DC/DC Converters

TEN 40N Series, 40 Watt

Scheme

Features

IEC 60950-1

UL 60950-1

◆ Highest power density:

40 W in 1” x 2” x 0.4” package

◆ Excellent efﬁciency up to 92 %

◆ Output voltage adjustable

◆ Remote On/Off

◆ Short circuit protection

◆ Over voltage protection

◆ I/O isolation 1500 VDC

◆ Operating temperature range

The TEN 40N Series is a new range of isolated high performance dc-dc converter

modules. Due to the very high efﬁciency of up to 92% these 40 W converters come

with a footprint of only 1.0” x 2.0”. The 15 models have a wide 2:1 input voltage

range and a tight output voltage regulation. The output voltage is adjustable by ex-

ternal resistor. Remote On/Off and protection against overpower and overvoltage

are standard features of these converters.

–40°C to +80°C

◆ Fully RoHS compliant

◆ 3-year product warranty

Typical applications are in mobile equipment, instrumentation, distributed power

architectures in communication and industrial electronics and everywhere where

space on the PCB is critical.

Models

Order code

Input voltage range

Output voltage

3.3 VDC

5.0 VDC

12 VDC

15 VDC

24 VDC

12 VDC

15 VDC

3.3 VDC

5.0 VDC

12 VDC

15 VDC

24 VDC

12 VDC

15 VDC

3.3 VDC

5.0 VDC

12 VDC

15 VDC

24 VDC

12 VDC

15 VDC

Output current max.

8‘000 mA

8’000 mA

3‘333 mA

2‘670 mA

1‘670 mA

1’670 mA

1‘330 mA

8‘000 mA

8’000 mA

3‘333 mA

2‘670 mA

1‘670 mA

1’670 mA

1‘330 mA

8‘000 mA

8’000 mA

3‘333 mA

2‘670 mA

1‘670 mA

1’670 mA

1‘330 mA

Efﬁciency

89 %

90 %

91 %

88 %

90 %

91 %

89 %

90 %

91 %

92 %

91 %

89 %

TEN 40-1210N

TEN 40-1211N

TEN 40-1212N

TEN 40-1213N

TEN 40-1215N

TEN 40-1222N

TEN 40-1223N

TEN 40-2410N

TEN 40-2411N

TEN 40-2412N

TEN 40-2413N

TEN 40-2415N

TEN 40-2422N

TEN 40-2423N

TEN 40-4810N

TEN 40-4811N

TEN 40-4812N

TEN 40-4813N

TEN 40-4815N

TEN 40-4822N

TEN 40-4823N

9 – 18 VDC

(nominal 12 VDC)

18 – 36 VDC

(nominal 24 VDC)

36 – 75 VDC

(nominal 48 VDC)

www.tracopower.com

Page 1 of 4

DC/DC Converters

TEN 40N Series

40 Watt

Input Specifications

Input current at no load

12 Vin;

24 Vin;

48 Vin;

3.3 VDC models: 120 mA typ.

(nominal input voltage)

5.0, 12 & 24 VDC models: 160 mA typ.

15 VDC models: 150 mA typ.

12 & 15 VDC dual output models: 70 mA typ. / 60 mA typ.

3.3 & 15 VDC models: 75 mA typ.

5.0, 12 & 24 VDC models: 80 mA typ. / 85 mA typ.

12 & 15 VDC dual output models: 50 mA typ. / 45 mA typ.

3.3 VDC models: 40 mA typ.

other single output models: 50 mA typ.

dual output models: 65 mA typ.

Surge voltage (100 ms max.)

12 Vin models: 25 V max.

24 Vin models: 50 V max.

48 Vin models: 100 V max.

Reflected input ripple current

12 Vin models: 50 mA typ.

24 Vin models: 30 mA typ.

48 Vin models: 20 mA typ.

Start-up voltage / under voltage shut down

12 Vin models: 9.0 VDC max. / 8.3 VDC typ.

24 Vin models: 18 VDC max. / 16.5 VDC typ.

48 Vin models: 36 VDC / 33 VDC typ.

Recommended input fuse (slow blow)

12 Vin models: 8000 mA

24 Vin models: 4000 mA

48 Vin models: 2000 mA

Conducted noise (input)

EN 55032 class A with external components

see application note

EMC immunity

– ESD (electrostatic discharge)

EN 61000-4-2, air 8 kV, contact 6 kV,

perf. criteria B

– Radiated immunity

– Fast transient / surge (with external input capacitor)

EN 61000-4-3, 10 V/m, perf. criteria A

EN 61000-4-4, 2 kV, perf. criteria A

EN 61000-4-5, 1 kV perf. criteria B

Nippon chemi-con KXG 330 µF, 200 V

EN 61000-4-6, 10 Vrms, perf. criteria A

– Conducted immunity

Output Specifications

Voltage set accuracy

1.0 %

Output voltage adjustment range

24 VDC models: +20 / –10 %

other models: 10 % with external resistor (see page 3)

Regulation

– Input variation Vin min. to Vin max.

– Load variation

0.5 % max.

single output models (0 – 100 %): 0.5 % max.

dual output models balanced load (10 – 100 %): 1.0 % max.

single output models: 0 %

Minimum load

dual output models: 10 % of rated max current (operation at lower

load condition will not damage the converters.

However, they may not meet all listed specifications)

Temperature coefficient

0.02 %/K

Ripple and noise (20 MHz Bandwidth)

with external capacitors 1 µF M/C 10 µF T/C

3.3 & 5.0 VDC models: 100 mVpk-pk. typ.

other models: 150 mVpk-pk typ.

Transient response (25 % load step change)

250 µs typ.

Output current limitation

110 % – 150 % of Iout max.

Short circuit protection

24 VDC models: 0.3 Hz. typ.

other models: hiccup mode 1.5 Hz, automatic recovery

Capacitive load

3.3 VDC models: 21’000 µF max.

5.0 VDC models: 13’600 µF max.

12.0 VDC models: 2’400 µF max.

15.0 VDC models: 1’500 µF max.

24.0 VDC models: 600 µF max.

12.0 VDC models: 1’200 µF max.

15.0 VDC models: 750 µF max.

All speciﬁcations valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.

www.tracopower.com

Page 2 of 4

DC/DC Converters

TEN 40N Series

40 Watt

General Specifications

Temperature ranges

– Operating (natural convection cooling 20 LFM)

– Case temperature

–40°C to +80°C (see load derating)

+105°C max.

– Storage

–50°C to +125°C

Load derating

(natural convection cooling 20 LFM)

– without heatsink

3.3 VDC models: 2.5 %/K above 66°C

other single output models: 1.6 %/K above 46°C

dual output models: 1.5 %/K above 40°C

3.3 VDC models: 3.1 %/K above 73°C

– with heatsink

other single output models: 2.0 %/K above 57°C

dual output models: 1.9 %/K above 52°C

Over temperature protection

at +110°C typ.

Humidity (non condensing)

95 % rel H max.

Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign)

328’000 h

1500 VDC

Isolation voltage (60 s)

Isolation capacitance

Isolation resistance

– Input/Output

1500 pF typ.

>1000 Mohm

Switching frequency (fixed)

24 VDC models: 285 kHz typ.

other models: 320 kHz typ. (pulse width modulation PWM)

Altitude during operation

Safety standards

5‘000 m max. (16‘400 ft) approved

IEC/EN 60950-1 (2nd Ed) + A1:2009

CAN/CSA-C22.2 No 60950-1-07 + Am1:2011

UL 60950-1, (2nd Ed) + Am1:2011

– Certification documents

www.tracopower.com/overview/ten40n

Remote On/Off

– On:

– Off:

– Off idle current:

3.5 to 12 VDC or open circuit.

0 to +1.2 VDC or short circuit pin 3 and pin 2

2.5 mA max.

Physical Specifications

Casing material

aluminum

Potting material

epoxy (UL 94V-0 rated)

30 g (1.05 oz)

Weight

Soldering temperature

260°C / 10 s max.

Environmental compliance – Reach

www.tracopower.com/info/reach-declaration.pdf

RoHS directive 2011/65/EU

– RoHS

Application note: www.tracopower.com/overview/ten40n

Output Voltage Adjustment

Trim up

Trim

Trim down

+Vout

Trim

Vout

Ru [kohm]*

output

+5%

+10%

3.3V

7.34 12.30 41.40 50.15 +10%

0.65 0.48 2.70 3.58 +20%

12V

15V

output 24V

output

–5%

–10%

3.3V

8.51 16.53 47.15 63.35 38.04

0.50 1.24 1.35 4.92 1.12

12V

15V

24V

27.38

0.34

*approximate values

All speciﬁcations valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.

www.tracopower.com

Page 3 of 4

DC/DC Converters

TEN 40N Series

40 Watt

Outline Dimensions

50.8

(2.0)

Pin-Out

Single

Dual

+Vin (Vcc)

–Vin (GND) –Vin (GND)

Remote On/Off

Bottom View

+Vout

–Vout

Trim

+Vout

Common

–Vout

(1.8)

2.54 (0.1)

45.72

Dimensions in [mm], () = Inch

Pin diameter: 1.0 0.05 (0.04 0.002)

Pin pitch tolerance: 0.13 ( 0.005)

Case tolerances: 0.25 ( 0.01)

* 11.0mm(0.43 inch) for 24V Output Models

Heat-sink (optional)

Order code: TEN HS6 for 24 VDC output models

TEN-HS4 for other models

Heat-sink

Thermal pad

Clamp

(cont.: heat-sink, thermal pad, 2 clamps)

Converter

Material:

Finish:

Weight:

Aluminum

Anodic treatment (black)

9 g (0.32oz) without converter

31.1 (1.22)

Thermal impedance after assembling: 10 K/W

Note:

Before attaching the heatsink, the product

label on converter has to be removed for

optimal performance.

For volume orders we can supply the

converters with heatsink already mounted.

Please contact us for a relative quotation.

H = 18.0 ( 0.71) for 24 VDC output model with TEN-HS6

H = 17.2 (0.68) for other models with TEN-HS4

Speciﬁcations can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com

Rev. June 04, 2018

www.tracopower.com

Page 4 of 4