THL25-2411WI [TRACOPOWER]
DC/DC Converters;型号: | THL25-2411WI |
厂家: | TRACO ELECTRONIC AG |
描述: | DC/DC Converters |
文件: | 总4页 (文件大小:204K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
DC/DC Converters
THL 25WI Series, 25 Watt
Features
CB
Scheme
◆ Highest power density 25W converter!
IEC 60950-1
UL 60950-1
Ultra compact design: 1.0” x 1.0” x 0.4”
◆ Shielded metal case with isolated
baseplate
◆ Ultra wide 4 : 1 input voltage ranges
◆ Very high efficiency up to 90%
◆ Output voltage adjustable
◆ Remote On/Off control
◆ Operating temp. range –40°C to +80°C
and up to +85°C with heat-sink
◆ I/O isolation voltage 1500 VDC
◆ 3-year product warranty
The THL 25WI series is the latest generation of dc-dc converter modules with highest
power density. The product achieves 25 Watt output power and comes in a metal
case with small dimensions of only 1.0”x 1.0”x 0.4”.
All models have a wide 4:1 input voltage range and precisely regulated output volt-
ages. High efficiency of up to 90% makes this product very reliable and applicable
in temperature ranges of up to +80°C or up to +85°C with optional mounted heat
sink. Typical applications are in mobile equipments, instrumentation, distributed
power architectures in communication and industrial electronics and everywhere
where space on the PCB is critical.
Models
Order code
Input voltage range
Output voltage
3.3 VDC
5.0 VDC
12 VDC
15 VDC
12 VDC
15 VDC
3.3 VDC
5.0 VDC
12 VDC
15 VDC
12 VDC
15 VDC
Output current max.
6000 mA
5000 mA
2090 mA
1670 mA
1040 mA
840 mA
Efficiency typ.
87 %
THL 25-2410WI
THL 25-2411WI
THL 25-2412WI
THL 25-2413WI
THL 25-2422WI
THL 25-2423WI
THL 25-4810WI
THL 25-4811WI
THL 25-4812WI
THL 25-4813WI
THL 25-4822WI
THL 25-4823WI
89 %
89 %
9 – 36 VDC
90 %
(24 VDC nominal)
89 %
89 %
6000 mA
5000 mA
2090 mA
1670 mA
1040 mA
840 mA
88 %
90 %
90 %
18 – 75 VDC
90 %
(48 VDC nominal)
89 %
89 %
http://www.tracopower.com
Page 1 of 4
DC/DC Converters
THL 25WI Series
25 Watt
Input Specifications
Input current at no load (at nominal input voltage)
24 Vin models: 85 mA typ.
48 Vin models: 45 mA typ.
Recommended input fuse (slow blow)
Start-up voltage
24 Vin models: 2500 mA
48 Vin models: 1250 mA
24 Vin models: 9 VDC (or lower)
48 Vin models: 18 VDC (or lower)
Surge voltage (0.1 sec. max.)
Reflected input ripple current
Conducted noise (input)
24 Vin models: 50 V max.
48 Vin models: 100 V max.
24 Vin models: 50 mAp-p typ.
48 Vin models: 30 mAp-p typ.
EN 55022 class A with external L/C
EN 55022 class B with external filter
see application note
ESD (electrostatic discharge)
EN 61000-4-2, air 8 kV, contact 6 kV,
perf. criteria A
Radiated immunity
EN 61000-4-3, 10 V/m, perf. criteria A
Fast transient / surge (with external input capacitor)
EN 61000-4-4, 2 kV, perf. criteria A
EN 61000-4-5, 1 kV perf. criteria A
external input capacitor:
Nippon chemi-con KY 220 µF, 100 V, ESR 48 mOhm
Conducted immunity
EN 61000-4-6, 10 Vrms, perf. criteria A
Output Specifications
Voltage set accuracy
1 %
Output voltage adj. range
10 % for single output models only.
Trim up via resistor between Trim and -Vout
Trim down via resistor between Trim and +Vout
resistor values see application note
Regulation
– Input variation (Vmin – Vmax)
– Load variation
0.2 % max.
single output models: 0.2 % max. (0 – 100 % load)
dual output models: 1.0 % max. (0 – 100 % balanced load)
dual output models: 5.0 % max. (25 – 100 % asymmetrical load)
–Cross regulation
Minimum load
Start up time
not required
30 ms
Ripple and noise (20 MHz bandwidth)
3.3 & 5.0 VDC models: 100 mVp-p typ.
12 & 15 VDC models: 150 mVp-p typ.
Temperature coefficient
Output current limitation
Short circuit protection
Over voltage protection
Transient recovery time
Transient response deviation
Max. capacitive load
0.02 %/K
at 150 % of Iout max., hiccup
indefinite, hiccup automatic recovery
shutdown at +20% of nominal output
250 µs typ. (25% load step change)
5% max. (25% load step change)
3.3 VDC models: 10’300 µF
5 VDC models: 6’800 µF
12 VDC models: 1’200 µF
15 VDC models: 750 µF
12 VDC models: 680 µF (each output)
15 VDC models: 380 µF (each output)
http://www.tracopower.com
Page 2 of 4
DC/DC Converters
THL 25WI Series
25 Watt
General Specifications
Temperature ranges
– Operating (natural convection 20 LFM)
–40°C to +80°C (with derating)
– Operating with heat sink (natural convection 20 LFM) –40°C to +85°C (with derating)
– Case temperature
– Storage
+105°C max.
–50°C to +125°C
Load derating
(natural convection 20 LFM, – with heat sink
typical values over series)
– without heat sink
2.0 %/K above +55°C
2.5 %/K above +65°C
see application note for particular models
Thermal impedance
– Natural convection
– Natural convection with heat sink
17.6°C/W
14.8°C/W
Humidity (non condensing)
95 % rel H max.
>315’000 h
Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign)
Isolation voltage (60sec.)
Isolation capacitance
Isolation resistance
Remote On/Off
– Input/Output
1500 VDC
– Input/Output
2000 pF max.
>1000 MOhm
– Input/Output (500 VDC)
– On:
– Off:
– Off idle current:
3.5 ... 15 VDC or open circuit
0 ... 1.2 VDC or short circuit pin 6 and pin 2
3 mA typ.
Switching frequency (fixed)
285 kHz typ. (pulse width modulation PWM)
4‘000 m max. (13‘123 ft) approved
UL/cUL 60950-1, IEC/EN 60950-1
Altitude during operation
Safety standards (designed to meet)
Safety approvals – CSA certificate of compliance
CAN/CSA-C22.2 No 60950-1-07, Am 1:2011
ANSI/UL Std No 60950-1, 2nd Ed, AM 1:2011
IEC 60950-1:2005 2nd Ed, Am 1:2009
www.tracopower.com/overview/thl25wi
– CB test certificate
– Certification documents
Environmental compliance – Reach
www.tracopower.com/overview/thl25wi
RoHS directive 2011/65/EU
– RoHS
Physical Specifications
Casing material
Baseplate
aluminium alloy, black anodized coating
non conductive FR4
Potting material
Pin material
epoxy (UL 94V-0 rated)
copper alloy with gold plated subplate
16.5 g (0.58 oz)
Weight
Soldering temperature
max. 260°C / 10sec.
Application note : www.tracopower.com/products/thl25wi-application.pdf
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
http://www.tracopower.com
Page 3 of 4
DC/DC Converters
THL 25WI Series
25 Watt
Outline Dimensions
7.62
(0.3)
5.08
(0.2)
Pin-Out
Single
Pin
1
Dual
1
2
6
+Vin (Vcc)
+Vin (Vcc)
2
–Vin (GND) –Vin (GND)
Bottom view
4
3
+Vout
Trim
+Vout
Common
–Vout
3
5
4
5
–Vout
10.16 10.16
2.5
(0.1)
6.0
(0.24)
10.2
(0.4)
(0.4)
(0.4)
6
Remote On/Off
25.4
(1.0)
Dimensions in [mm], () = Inch
Pin diameter ø 1.0 (0.04)
Pin pitch tolerances: 0.25 ( 0.01)
Tolerances: 0.5 ( 0.02)
Heat-Sink (optional)
Order code: THL-HS1
(cont.: heat-sink, thermal pad, 2 clamps)
Aluminum
Anodic treatment (black)
4 g (0.14 oz) without converter
Material:
Finish:
Weight:
Thermal impedance after assembling: 15.8 K/W
31.0 (1.22) max.
Heat-sink
Thermal pad
Clamp
Note:
The product label on converter has to be re-
moved before mounting the heat-sink.
For volume orders converters will be sup-
plied with mounted heat-sink. Please contact
factory for quotation.
Converter
17.5 (0.69)
max.
Separate heat-sinks are only available for
prototypes and small quantity orders.
Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com
Rev. April 07. 2015
www.tracopower.com
Page 4 of 4
相关型号:
©2020 ICPDF网 联系我们和版权申明