THM10-1222 [TRACOPOWER]
DC/DC Converter;
| 型号： | THM10-1222 |
| 厂家： | 
TRACO ELECTRONIC AG |
| 描述： | DC/DC Converter |
| 文件： | 总4页 (文件大小：313K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
DC/DC Converter
THM 10 Series, 10 Watt
• Wide 2:1 input voltage 10 W DC/DC
converter in a compact DIP-24 plastic case
• I/O isolation 5000 VACrms rated for
250 VACrms working voltage
• Certification according to IEC/EN/ES
60601-1 3rd edition for 2xMOPP
CB
Scheme
ES 60601-1
IEC 606010-1
• Risk management process according to
ISO 14971 including risk management file
The THM-10 series is a range of medical 10 Watt DC/DC converters in DIP-24
plastic package and with wide 2:1 input voltage range. They provide a reinforced
isolation system for 5000 VACrms isolation and a very low leakage current of
less than 2 µA. The units are approved to IEC/EN/ES 60601-1 3rd edition for 2
x MOPP (Means Of Patient Protection) and come along with an ISO 14971 risk
management file. Design and production conform to the quality management
system ISO 13485. With a high efficiency of up to 89% and highest grade com-
ponents the converters can reliably operate in an ambient temperature range
of –40°C up to +90°C. They constitute a reliable solution not only for medical
equipment but also for demanding ranges of application such as transportation,
control & measurement or IGBT drivers.
• Acceptance criteria for electronic
assemblies according to IPC-A-610 Level 3
• Low leakage current < 2µA
• Eꢀtended operating temperature range
–40°C to 90°C.
• EMC compliance to IEC 60601-1-2 4th
edition and EN55032 class A
• Operating up to 5000m altitude
• 5 year product warranty
Models
Order code
THM 10-0510
THM 10-0511
THM 10-0512
THM 10-0513
THM 10-0515
THM 10-0521
THM 10-0522
THM 10-0523
THM 10-1210
THM 10-1211
THM 10-1212
THM 10-1213
THM 10-1215
THM 10-1221
THM 10-1222
THM 10-1223
THM 10-2410
THM 10-2411
THM 10-2412
THM 10-2413
THM 10-2415
THM 10-2421
THM 10-2422
THM 10-2423
THM 10-4810
THM 10-4811
THM 10-4812
THM 10-4813
THM 10-4815
THM 10-4821
THM 10-4822
THM 10-4823
Input voltage range
Output voltage
3.3 VDC
5.0 VDC
12 VDC
15 VDC
24 VDC
5.0 VDC
12 VDC
15 VDC
3.3 VDC
5.0 VDC
12 VDC
15 VDC
24 VDC
5.0 VDC
12 VDC
15 VDC
3.3 VDC
5.0 VDC
12 VDC
15 VDC
24 VDC
5.0 VDC
12 VDC
15 VDC
3.3 VDC
5.0 VDC
12 VDC
15 VDC
24 VDC
5.0 VDC
12 VDC
15 VDC
Output current maꢀ.
2500 mA
2000 mA
830 mA
Efficiency typ.
80.0 %
84.0 %
86.5 %
87.0 %
85.5 %
83.0 %
85.5 %
86.5 %
83.0 %
85.5 %
88.0 %
89.0 %
89.0 %
84.0 %
89.0 %
88.0 %
83.0 %
86.5 %
89.0 %
89.0 %
89.0 %
85.0 %
89.0 %
88.0 %
82.5 %
86.5 %
89.0 %
89.0 %
88.5 %
85.0 %
88.0 %
88.0 %
670 mA
416 mA
1000 mA
416 mA
333 mA
2500 mA
2000 mA
830 mA
670 mA
416 mA
1000 mA
416 mA
333 mA
2500 mA
2000 mA
830 mA
670 mA
416 mA
1000 mA
416 mA
333 mA
4.5 – 9 VDC
(5 VDC nominal)
9. 0 – 18 VDC
(12 VDC nominal)
18 – 36 VDC
(24 VDC nominal)
2500 mA
2000 mA
830 mA
670 mA
416 mA
1000 mA
416 mA
333 mA
36 – 75 VDC
(48 VDC nominal)
http://www.tracopower.com
Page 1 of 4
THM 10 Series, 10 Watt
Input Specifications
Input current no load
5 Vin models: 20 mA typ.
12 Vin models: 10 mA typ.
24 Vin models: 6 mA typ.
48 Vin models: 4 mA typ.
Surge voltage (3 sec. max.)
5 Vin models: 16 V max.
12 Vin models: 25 V max.
24 Vin models: 50 V max.
48 Vin models: 100 V max.
Start-up voltage
5 Vin models: 4.5 VDC (or lower)
12 Vin models: 9 VDC (or lower)
24 Vin models: 18 VDC (or lower)
48 Vin models: 36 VDC (or lower)
Startup time
30 ms
Under voltage shut down
5 Vin models: 4 VDC typ.
12 Vin models: 8 VDC typ.
24 Vin models: 16 VDC typ.
48 Vin models: 33 VDC typ.
Conducted noise
EMC immunity
– Conducted & Radiated input surpression
EN 55011 limits to IEC 60601-1-2 4th editon
EN 55032 class A (internal filter)
– Generic for Medical equipment
– ESD (electrostatic discharge)
IEC/EN 60601-1-2 4th edition
EN 61000-4-2, air 8 kV, contact 6 kV,
perf. criteria A
– Radiated immunity
– Fast transient / surge
(with external input capacitor / diode)
EN 61000-4-3, 10 V/m, perf. criteria A
EN 61000-4-4, 2 kV, perf. criteria A
EN 61000-4-5, 2 kV perf. criteria A
5 Vin models: Nippon chemi-con KY 1000 µF/ 25 V and
reverse diode (Vishay V10P45) in parallel
12 & 24 Vin models: Nippon chemi-con KY 470 µF/ 50 V
48 Vin models: Nippon chemi-con KY 330 µF/ 100 V
EN 61000-4-6, 10 Vrms, perf. criteria A
EN 61000-4-8
– Conducted immunity
– Magnetic field immunity
100 A/m, continuous, perf. criteria A
1000 A/m, 1 sec., perf. criteria A
Output Specifications
Voltage set accuracy
1% max.
Regulation
– Input variation
single output: 0.2% max.
dual output: 0.5% max.
– Load variation 0 – 100 %
– Cross regulation
single output: 0.2% max.
dual output: 1.0% max.
dual output: 5.0% max. (asymmetrical load 25/100%)
Minimum load
not required
Ripple and noise (20 MHz Bandwidth)
3.3 & 5.0 VDC models: 30 mVp-p typ. with cap. 10µF/25V X7R MLCC
12 & 15 VDC models: 40 mVp-p typ. with cap. 10µF/25V X7R MLCC
24 VDC models: 50 mVp-p typ. with cap. 4.7µF/50V X7R MLCC
Transient response (25% load step change)
– Recovery time
250 µs typ.
Over load protection
at 150 % typ. of Iout rated (hiccup mode)
Continuous, automatic recovery
Short circuit protection
Over voltage protection
–Single output
–Dual output
3.3 VDC models: 3.7–5.0 VDC
5.0 VDC models: 5.6–7.0 VDC
12 VDC models: 13.5–16.0 VDC
15 VDC models: 18.3–22.0 VDC
24 VDC models: 29.1–34.5 VDC
5 VDC models: 5.6–7.0 VDC
12 VDC models: 13.5–18.2 VDC
15 VDC models: 17.0–22.0 VDC
http://www.tracopower.com
Page 2 of 4
THM 10 Series, 10 Watt
General Specifications
Capacitive load
–Single output
3.3 VDC models: 3‘000 µF max.
5.0 VDC models: 2‘500 µF max.
12 VDC models: 430 µF max.
15 VDC models: 350 µF max.
24 VDC models: 125 µF max.
–Dual output
5 VDC models: 1‘440 µF max. (each output)
12 VDC models: 250 µF max. (each output)
15 VDC models: 180 µF max. (each output)
Temperature ranges
– Operating
– Rated according to IEC/EN 60601-1
– Case temperature
–40°C to +90°C (with derating)
–40°C to +50°C (without derating)
+105°C max.
– Storage temperature
–55°C to +125°C
Derating
3.5 %/K above 75°C
18K/W
Thermal impedance
Humidity (non condensing)
5 % to 95 % rel H max.
Isolation voltage
(50Hz, 60sec)
– to meet ES/IEC/EN 60601-1
5000 VACrms, rated for 250 VACrms working
voltage, 2ꢀMOPP
Clearance/creepage
8 mm min.
Leakage current (at 240VAC, 60Hz)
Isolation capacitance (input/output)
Altitude during operation
2µA max.
17 pF max.
5000 m
Temperature coefficient
0.02 %/K typ.
Reliability, calculated MTBF (MIL-HDBK-217F at +25°C, ground benign)
Switching frequency
3‘850‘000 h
300 kHz 30 kHz (pulse width modulation)
according to MIL-STD-810F
Vibration and thermal shock resistance
Safety standards/approvals
– Medical equipment
ANSI/AAMI ES60601-1:2005/(R)2012,
IEC/EN60601-1 3rd edition
– Certification documents
www.tracopower.com/products/overview/thm10
Environmental compliance – Reach
www.tracopower.com/products/reach-declaration.pdf
RoHS directive 2011/65/EU
– RoHS
Physical Specifications
Casing material
non-conductive black plastic
non-conductive black plastic
silicone (UL94 V-0 rated)
14 g (0.48oz)
Base material
Potting material
Package weight
Soldering temperature
max. 265°C / 10 sec
he component is not be used in an oxygen rich environment.
he component is not to be used in conjunction with flammable anaesthetics and agents.
he component has to be disposed appropriately. Please refer to local regulations (Waste Electrical and Electronic Equipment).
modification of the component is not allowed.
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
http://www.tracopower.com
Page 3 of 4
THM 10 Series, 10 Watt
Outline Dimensions
Standard pinning
Standard Pinout
1
11 12
13
Pin
1
Single
+Vin (Vcc)
No pin
Dual
+Vin (Vcc)
Common
No pin
Bottom view
11
12
13
15
23
24
–Vout
24 23
15
+Vout
–Vout
No pin
+Vout
–Vin (GND)
–Vin (GND)
–Vin (GND)
–Vin (GND)
31.8 (1.25)
2.0
(0.08)
2.54
(0.10)
20.32 (0.80)
2x2.54
(2x0.1)
Optional pinning: suffix -B1
Optional Pinout
2
11
14
Pin
2
Single
–Vin (GND)
No con.
+Vout
Dual
–Vin (GND)
–Vout
11
14
16
22
23
Bottom view
16
+Vout
–Vout
+Vin (Vcc)
+Vin (Vcc)
Common
+Vin (Vcc)
+Vin (Vcc)
23 22
Remark: No suffix -B1 for 5 Vin models. Corresponding
parts are with THM 10WI series by default.
31.8 (1.25)
see www.tracopower.com/overview/thm10wi
4.5
Dimensions in [mm], () = Inch
Tolerances 0.5 ( 0.02)
Pin ø 0.6 0.1 (0.024 0.004)
Pin pich tolerances 0.25 ( 0.01)
(0.18)
2.54
(0.10)
15.24 (0.60)
5.08
(0.20)
©
Copyright 2017 Traco Electronic AG
Specifications can be changed without notice!
Rev. November 21, 2017
Page 4 of 4
www.tracopower.com
相关型号：
THM10-1223
DC/DC ConverterWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TRACOPOWER
THM10-2410
DC/DC ConverterWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TRACOPOWER
THM10-2410WI
DC/DC ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TRACOPOWER
THM10-2410WI
DC/DC ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TOUCHSTONE
THM10-2411
DC/DC ConverterWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TRACOPOWER
THM10-2411WI
DC/DC ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TRACOPOWER
THM10-2411WI
DC/DC ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TOUCHSTONE
THM10-2412
DC/DC ConverterWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TRACOPOWER
THM10-2412WI
DC/DC ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TRACOPOWER
THM10-2412WI
DC/DC ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TOUCHSTONE
THM10-2413
DC/DC ConverterWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TRACOPOWER
THM10-2413WI
DC/DC ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
TRACOPOWER
©2020 ICPDF网 联系我们和版权申明