857174_15 [TRIQUINT]
70 MHz SAW Filter;
| 型号： | 857174_15 |
| 厂家： | 
TRIQUINT SEMICONDUCTOR |
| 描述： | 70 MHz SAW Filter |
| 文件： | 总6页 (文件大小：598K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
857174
70 MHz SAW Filter
Applications
For Military applications
Product Features
Functional Block Diagram
Top view
Typical 3 dB bandwidth of 4.9 MHz
Low loss
Input
10
Gnd Gnd Gnd Gnd
High Attenuation
9
8
7
6
Single-ended operation
Ceramic Surface Mount Package (SMP)
Small Size
1
2
3
4
5
Dimensions: 19.00 x 6.50 x 1.75mm
RoHS compliant, Pb-free
Gnd
Gnd
Output
Gnd
Gnd
General Description
Pin Configuration
The 857174 is a high-performance IF SAW filter with a
center frequency of 70 MHz and a 3 dB bandwidth of 4.9
MHz.
Pin # SE
Description
RF Input
RF Output
Ground
10
5
1,6
2,3,4,7,8,9
It features low loss with excellent attenuation, and is
designed to be used with a single ended input and output.
Case ground
This device is RoHS compliant and Pb-free.
Ordering Information
Part No.
857174
Description
packaged part
857174-EVB
evaluation board
Standard T/R size = 2000 units/reel.
Preliminary Data Sheet: Rev - 9/27/12
- 1 of 6 -
Disclaimer: Subject to change without notice
Connecting the Digital World to the Global Network
© 2012 TriQuint Semiconductor, Inc.
857174
70 MHz SAW Filter
Specifications
Electrical Specifications (1)
Specified Temperature Range: (2) -55 to +105 ºC
Parameter (3)
Conditions
Min
Typical (4) Max Units
Center Frequency
-
70
-
-
MHz
dB
Insertion Loss
at minimum
-
-
25.5
Lower 1.0 dB Bandedge
Upper 1.0 dB Bandedge (5)
Lower 3.0 dB Bandedge
Upper 3.0 dB Bandedge (5)
Lower 40.0 dB Bandedge
Upper 40.0 dB Bandedge (5)
Amplitude Variation(6)
Phase Linearity
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
67.9
-
67.65
-
MHz
MHz
MHz
MHz
MHz
MHz
dB p-p
deg p-p
ns p-p
dB
dB
dB
dB
dB
dB
dB
72.1
-
72.35
66.6
-
-
-
-
40
34
34
45
50
45
60
-
-
73.4
1.2
7
180
-
-
-
-
-
-
-
-
-
67.9 – 72.1 MHz
67.9 – 72.1 MHz
67.9 – 72.1 MHz
10 – 58 MHz
58 – 65 MHz
75 – 82 MHz
82 – 90 MHz
90 – 120 MHz
120 – 145 MHz
145 – 200 MHz
-
Group Delay Variation
Relative Attenuation
Source Impedance (single-ended) (7)
Load Impedance (single-ended) (7)
50
50
-
-
Notes:
1. All specifications are based on the TriQuint schematic for the main reference design shown on page 3
2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over
temperature
3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances
4. Typical values are based on average measurements at room temperature
5. Relative to insertion loss at center frequency
6. Is defined as the difference between the maximum and minimum loss within the specified frequency range
7. This is the optimum impedance in order to achieve the performance shown
Absolute Maximum Ratings
Parameter
Operating Temperature
Storage Temperature
Rating
-55 to +105 oC
-55 to +105 oC
Operation of this device outside the parameter ranges given above may cause permanent damage.
Preliminary Data Sheet: Rev - 9/27/12
- 2 of 6 -
Disclaimer: Subject to change without notice
© 2012 TriQuint Semiconductor, Inc.
Connecting the Digital World to the Global Network
857174
70 MHz SAW Filter
Reference Design – 50 SE Input, 50 SE Output
Schematic
390nH
18pF
10
120nH
5
50
50
Single-ended
Input
50
Single-ended
Output
50
1,2,3,4
6,7,8,9
Notes:
1. Actual matching values may vary due to PCB layout and parasitics
PC Board
Mounting Configuration
8.86
2.51
960656
TRIQUINT
857174
YYWW
L1
C1
6.70
L2
1.22
2.00
.69
Notes:
Notes:
1. All dimensions are in millimeters.
2. This footprint represents a recommendation only.
Top, middle & bottom layers: 1 oz copper
Substrates: FR4 dielectric, .031” thick
Finish plating: Nickel: 3-8µm thick, Gold: .03-.2µm thick
Hole plating: Copper min .0008µm thick
Bill of Material
Reference Desg. Value Description
Manufacturer
Coilcraft
Coilcraft
MuRata
Radiall USA Inc.
multiple
Part Number
0805CS-391XJLC
0805CS-121XJLC
GRM2165C1H180JZ01
9602-1111-018
L1
390nH
120nH
18pF
N/A
Coil Wire-wound, 0805, 5%
Coil Wire-wound, 0805, 5%
Chip Capacitor, 0805, 5%
SMA connector
L2
C1
SMA
PCB
N/A
3-layer
960656
Preliminary Data Sheet: Rev - 9/27/12
- 3 of 6 -
Disclaimer: Subject to change without notice
© 2012 TriQuint Semiconductor, Inc.
Connecting the Digital World to the Global Network
857174
70 MHz SAW Filter
Typical Performance (at room temperature)
Preliminary Data Sheet: Rev - 9/27/12
- 4 of 6 -
Disclaimer: Subject to change without notice
© 2012 TriQuint Semiconductor, Inc.
Connecting the Digital World to the Global Network
857174
70 MHz SAW Filter
Mechanical Information
Package Information, Dimensions and Marking
Package Style: SMP-75
Dimensions: 19.00 x 6.50 x 1.75mm
TRIQUINT
857174
YYWW
ID Dot
Body: Al2O3 ceramic
Lid: Kovar, Ni plated
Terminations: Au plating 0.5 - 1.0μm, over a 2-6μm Ni
plating
Date Code
1.75 NOM.
1.96 MAX.
All dimensions shown are nominal in millimeters
All tolerances are ±0.15mm except overall length and width
±0.10mm
0.76
1.80
19.0
The date code consists of: YY = last two digits of the year,
WW = work week
1.91
R0.51
2.31
6.50
1.02
Tape and Reel Information
Standard T/R size = 2000 units/reel. All dimensions are in millimeters
ID dot
32.8
Section A-A
4.0
2.7
Ø330
R0.75
Ø1.5
0.3
A
1.75
14.2
2.0
32.0
28.4
19.6
Ø102
Ø20.2
Ø13.0
2.0
Direction of travel
0.20
2.3
12.0
A
7.1
Ø1.5
Preliminary Data Sheet: Rev - 9/27/12
- 5 of 6 -
Disclaimer: Subject to change without notice
Connecting the Digital World to the Global Network
© 2012 TriQuint Semiconductor, Inc.
857174
70 MHz SAW Filter
Product Compliance Information
ESD Information
Solderability
Compatible with the latest version of J-STD-020, lead
free solder, 260°C
Caution! ESD-Sensitive Device
Refer to Soldering Profile for recommended guidelines.
ESD Rating: TBD
This part is compliant with EU 2002/95/EC RoHS
directive (Restrictions on the Use of Certain Hazardous
Substances in Electrical and Electronic Equipment).
Value:
Test:
Passes TBD V min.
Human Body Model (HBM)
JEDEC Standard JESD22-A114
Standard:
This product also has the following attributes:
Halogen Free (Chlorine, Bromine)
Antimony Free
ESD Rating: TBD
Value:
Test:
Passes TBD V min.
Machine Model (MM)
Standard:
JEDEC Standard JESD22-A115
TBBP-A (C15H12Br402) Free
PFOS Free
SVHC Free
MSL Rating
Devices are Hermetic, therefore MSL is not applicable.
Contact Information
For the latest specifications, additional product information, worldwide sales and distribution locations, and information about
TriQuint:
Web: www.triquint.com
Email: info-sales@tqs.com
Tel:
Fax:
+1.407.886.8860
+1.407.886.7061
For technical questions and application information:
Email: applications.engineering@tqs.com
Important Notice
The information contained herein is believed to be reliable. TriQuint makes no warranties regarding the information contained
herein. TriQuint assumes no responsibility or liability whatsoever for any of the information contained herein. TriQuint
assumes no responsibility or liability whatsoever for the use of the information contained herein. The information contained
herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated with such information is entirely with
the user. All information contained herein is subject to change without notice. Customers should obtain and verify the latest
relevant information before placing orders for TriQuint products. The information contained herein or any use of such
information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property
rights, whether with regard to such information itself or anything described by such information.
TriQuint products are not warranted or authorized for use as critical components in medical, life-saving, or life-sustaining
applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death.
Preliminary Data Sheet: Rev - 9/27/12
- 6 of 6 -
Disclaimer: Subject to change without notice
© 2012 TriQuint Semiconductor, Inc.
Connecting the Digital World to the Global Network
相关型号：
©2020 ICPDF网 联系我们和版权申明