857216 [TRIQUINT]

1030 MHz SAW filter;


型号：	857216
厂家：	TRIQUINT SEMICONDUCTOR
描述：	1030 MHz SAW filter
文件：	总6页 (文件大小：548K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

857216

1030 MHz SAW filter

Applications



General purpose RF filter

SMP-12, 3.00 x 3.00 x 1.22 mm

Product Features

Functional Block Diagram



Usable bandwidth 10 MHz

High attenuation



Gnd

Low Loss

Excellent power handling

Single-ended operation

Input

Output

No Matching required for operation at 50Ω

Small Size: 3.00 x 3.00 x 1.22 mm

Ceramic Surface Mount Package (SMP)

Gnd

Hermetically sealed

RoHS compliant, Pb-free

General Description

Pin Configuration - Single Ended

857216 is a general purpose RF filter designed in a

3x3mm hermetic package

Pin No.

Label

Input

Output

Ground

1.3,4,6

Ordering Information

Part No.

857216

Description

Product description

857216-EVB

Evaluation board description

Standard T/R size = 5000 units/reel

Preliminary Data Sheet: Rev C 07-11-2014

Disclaimer: Subject to change without notice

- 1 of 6 -

857216

1030 MHz SAW filter

Absolute Maximum Ratings

1. Operation of this device outside the parameter ranges given

may cause permanent damage.

2. Specifications are not guaranteed over all operable

conditions.

Parameter

Rating

Storage Temperature ⁽¹⁾

Operable Temperature ⁽²⁾

RF Input Power ⁽³⁾

-55 to +85°C

+15 dBm

3. Input power with applied CW signal at +85°C for 10K hours

Electrical Specifications ⁽¹⁾

Test conditions unless otherwise noted: ⁽²⁾Temp= -55°C to +85°C

Parameter ⁽³⁾

Conditions

Min

Typ ⁽⁴⁾Max

Units

Center Frequency

1030

MHz

Maximum Insertion Loss

1025 – 1035 MHz

2.3

4.0

Amplitude Variation ⁽⁵⁾

Group Delay Variation

1.25 dB Lower Bandedge ⁽⁶⁾

1.25 dB Upper Bandedge

0.18

1.25

dB p-p

1025 – 1035 MHz

10.21

1035

1020

1041

1025

MHz

500 – 946 MHz

946 – 980 MHz

980 – 990 MHz

1080 – 1100 MHz

1100 – 1250 MHz

1250 – 1600 MHz

Relative Attenuation ⁽⁷⁾

Source Impedance ⁽⁸⁾

single-ended

Ohms

(8)

Load Impedance

Notes:

1. All specifications are based on the TriQuint schematic shown on page 3

2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance

over temperature

3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing

tolerances

4. Typical values are based on average measurements at room temperature

5. Amplitude Variation is defined as the difference between the lowest loss and the highest loss within defined frequency

points

6. Relative to loss at 1030 MHz

7. Relative to zero dB

8. This is the optimum impedance in order to achieve the performance shown

Preliminary Data Sheet: Rev C 07-11-2014

Disclaimer: Subject to change without notice

- 2 of 6 -

857216

1030 MHz SAW filter

Part Number Evaluation Board

Matching Schematics



1,3,4,6

960700

Notes:

1. No impedance matching required.

2. PCB:Top, middle & bottom layers: 1 oz copper, Substrates:FR4 dielectric, 031” thick Finish plating: Nickel: 3-8µm thick,

Gold: .03-.2µm thick Hole plating: Copper min .0008µm thick

Bill of Material – 857216-EVB

Reference Des.

Value Description

Manuf.

Part Number

DUT

SMA

PCB

1030 MHz SAW filter

TriQuint

857216

SMA connector

3-Layer

Radiall USA Inc. 9602-1111-018

Multiple 960700

PCB Mounting Pattern

Notes:

3.20 SQ

.96

1. All dimensions are in millimeters. Angles are in degrees.

2. This drawing specifies the mounting pattern used on the TriQuint

evaluation board for this product. Some modification may be necessary

to suit end user assembly materials and processes.

1.70

1.27

.81

.38

Preliminary Data Sheet: Rev C 07-11-2014

Disclaimer: Subject to change without notice

- 3 of 6 -

857216

1030 MHz SAW filter

Performance Plots

Test conditions unless otherwise noted: Temp= +25°C

Preliminary Data Sheet: Rev C 07-11-2014

Disclaimer: Subject to change without notice

- 4 of 6 -

857216

1030 MHz SAW filter

Package Information, Marking and Dimensions

Package Style: SMP-12A

Dimensions: 3.00 x 3.00 x 1.22 mm

TriQuint

logo

Marking

code

Date code

Body: Al₂O₃ceramic

YYWW

ID dot

Lid: Kovar, Ni plated

Terminations: Au plating 0.5 - 1.0μm, over a 2-6μm Ni plating

All dimensions shown are nominal in millimeters

All tolerances are ±0.15mm except overall length and width

±0.10mm

1.22 NOM.

1.32 MAX.

0.69

The date code consists of, YY = last 2 digits of the year, and

WW = 2 digits of worked week

3.00

0.75

1.50

Notes:

1. All dimensions shown are typical in millimeters

2. An asterisk (*) in front of the marking code indicates prototype.

3.00

0.75

0.60

Tape and Reel information

Standard T/R size = 5000 units/reel. All dimensions are in millimeters

TriQuint

12.8

logo

ID dot

2.7

Ø330

Section A-A

0.21

4.0

Ø1.5

1.75

5.5

2.0

Ø102

Ø20.2

Ø13.0

Direction of travel

12.0

2.0

3.25

4.0

Ø1.5

1.4

Preliminary Data Sheet: Rev C 07-11-2014

Disclaimer: Subject to change without notice

- 5 of 6 -

857216

1030 MHz SAW filter

Product Compliance Information

ESD Sensitivity Ratings

Solderability

Compatible with both lead-free (260°C maximum

reflow temperature) and tin/lead (245°C maximum

reflow temperature) soldering processes.

Caution! ESD-Sensitive Device

Refer to Soldering Profile for recommended guidelines.

ESD Rating: Class 0

Value:

Test:

Passes ≥ 300V to < 350 V

RoHs Compliance

Electrostatic Discharge Sensitivity Testing,

Human Body Model (HBM) - component level

Standard: ESDA/JEDEC JS-001-2012

This part is compliant with EU 2002/95/EC RoHS

directive (Restrictions on the Use of Certain

Hazardous Substances in Electrical and Electronic

Equipment).

ESD Rating: Class C1

Value:

Test:

Standard:

Passes  100 V to < 150 V

This product also has the following attributes:

Machine Model (MM)



Lead Free

Halogen Free (Chlorine, Bromine)

Antimony Free

TBBP-A (C₁₅H₁₂Br₄0₂) Free

PFOS Free

SVHC Free

JEDEC Standard JESD22-A115

MSL Rating

Not applicable. Hermetic package.

Contact Information

For the latest specifications, additional product information, worldwide sales and distribution locations, and

information about TriQuint:

Web: www.triquint.com

Email: info-sales@tqs.com

Tel:

Fax:

+1.407.886.8860

+1.407.886.7061

For technical questions and application information: Email: flapplication.engineering@tqs.com

Important Notice

The information contained herein is believed to be reliable. TriQuint makes no warranties regarding the information

contained herein. TriQuint assumes no responsibility or liability whatsoever for any of the information contained

herein. TriQuint assumes no responsibility or liability whatsoever for the use of the information contained herein.

The information contained herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated

with such information is entirely with the user. All information contained herein is subject to change without notice.

Customers should obtain and verify the latest relevant information before placing orders for TriQuint products. The

information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any

patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or

anything described by such information.

TriQuint products are not warranted or authorized for use as critical components in medical, life-saving, or life-

sustaining applications, or other applications where a failure would reasonably be expected to cause severe

personal injury or death.

Preliminary Data Sheet: Rev C 07-11-2014

Disclaimer: Subject to change without notice

- 6 of 6 -

相关型号：