857217_15 [TRIQUINT]

742.5 MHz SAW filter;


型号：	857217_15
厂家：	TRIQUINT SEMICONDUCTOR
描述：	742.5 MHz SAW filter
文件：	总6页 (文件大小：303K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

857217

742.5 MHz SAW filter

Applications

•

General purpose RF filters

•

For B12/13 DL repeater applications

SMP-12, 3.00 x 3.00 x 1.22 mm

Product Features

Functional Block Diagram

•

Usable bandwidth 27 MHz

High attenuation

•

Gnd

Low Loss

Excellent power handling

Single-ended operation

Input

Output

Matching required for operation at 50Ω

Small Size: 3.00 x 3.00 x 1.22 mm

Ceramic Surface Mount Package (SMP)

Gnd

Hermetically sealed

RoHS compliant, Pb-free

General Description

Pin Configuration - Single Ended

857217 is a general purpose Down filter for Bands 12

and 13. This filter was specifically designed in a

3x3mm hermetic package for Base Station and

Repeater applications and is part of our wide portfolio

of RF filters in the same package.

Pin No.

Label

Input

Output

Ground

1.3,4,6

Low insertion loss, coupled with high attenuation and

excellent power handling, makes this filter a natural

choice for our customers.

Ordering Information

Part No.

857217

Description

Product description

857217-EVB

Evaluation board description

Standard T/R size = 5000 units/reel

Preliminary Data Sheet: Rev A 19-04-13

Disclaimer: Subject to change without notice

- 1 of 6 -

857217

742.5 MHz SAW filter

Absolute Maximum Ratings

1. Operation of this device outside the parameter ranges given

may cause permanent damage.

2. Specifications are not guaranteed over all operable

conditions.

Parameter

Rating

Storage Temperature ⁽¹⁾

Operable Temperature ⁽²⁾

RF Input Power ⁽³⁾

-40 to +85°C

+30 dBm

3. Input Power with applied CW signal at +55°C for 1500 hours

Electrical Specifications ⁽¹⁾

Test conditions unless otherwise noted: ⁽²⁾Temp= +25°C to +70°C

Parameter ⁽³⁾

Conditions

Min

Typ ⁽⁴⁾Max

Units

MHz

Center Frequency

742.5

3.5

Maximum Insertion Loss

Amplitude Variation ⁽⁵⁾

729 – 756 MHz

2.5

2.0

MHz

10 – 698 MHz

698 – 716 MHz

716 – 722.5 MHz

766.5 – 776 MHz

776 – 787 MHz

824 – 894 MHz

1400 – 2155 MHz

2184 – 2271 MHz

Absolute Attenuation ⁽⁶⁾

Temperature Coefficient

Input VSWR

2110 – 2170 MHz

729 – 756 MHz

single-ended

-45

1.9

2.2:1

Output VSWR

2.2:1

Source Impedance ⁽⁷⁾

Ohms

(7)

Load Impedance

single-ended

Notes:

1. All specifications are based on the TriQuint schematic shown on page 2

2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance

over temperature

3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing

tolerances

4. Typical values are based on average measurements at room temperature

5. Amplitude Variation is defined as the difference between the lowest loss and the highest loss within defined frequency

points

6. Relative to zero dB

7. This is the optimum impedance in order to achieve the performance shown

Preliminary Data Sheet: Rev A 19-04-13

Disclaimer: Subject to change without notice

- 2 of 6 -

857217

742.5 MHz SAW filter

857217 Evaluation Board

Matching Schematics

Ω

1,3,4,6

960700

Notes:

1. No impedance matching required (if applicable).

2. Matching component values shown are for the specified TriQuint evaluation board. Value adjustment may be required in

end user product circuits depending on component manufacturer and PCB material.

Bill of Material – 857217-EVB

Reference Des.

SMA

Value Description

Manuf.

Radiall USA

Part Number

9602-1111-018

960700

N/A

SMA connector

N/A

PCB

3-layer

multiple

PCB Mounting Pattern

Notes:

3.20 SQ

.96

1. All dimensions are in millimeters. Angles are in degrees.

2. This drawing specifies the mounting pattern used on the TriQuint

evaluation board for this product. Some modification may be necessary

to suit end user assembly materials and processes.

1.70

1.27

.81

.38

Preliminary Data Sheet: Rev A 19-04-13

Disclaimer: Subject to change without notice

- 3 of 6 -

857217

742.5 MHz SAW filter

Performance Plots

Test conditions unless otherwise noted: Temp= +25°C

Preliminary Data Sheet: Rev A 19-04-13

Disclaimer: Subject to change without notice

- 4 of 6 -

857217

742.5 MHz SAW filter

Package Information, Marking and Dimensions

Package Style: SMP-12A

Dimensions: 3.00 x 3.00 x 1.22 mm

TriQuint

logo

Marking

code

Date code

Body: Al₂O₃ceramic

Lid: Kovar, Ni plated

ID dot

Terminations: Au plating 0.5 - 1.0μm, over a 2-6μm Ni plating

JJJY M

All dimensions shown are nominal in millimeters

All tolerances are ±0.15mm except overall length and width

±0.10mm

1.22 NOM.

1.32 MAX.

0.69

The date code consists of day of the current year (Julian,

3 digits), Y = last digit of the year, and M = manufacturing site

code

3.00

0.75

1.50

Notes:

3.00

1. All dimensions shown are typical in millimeters

2. An asterisk (*) in front of the marking code indicates prototype.

0.75

0.60

Tape and Reel information

Standard T/R size = 5000 units/reel. All dimensions are in millimeters

Section A-A

0.21

TriQuint

12.8

logo

2.7

4.0

Ø330

ID dot

Ø1.5

1.75

5.5

2.0

12.0

3.25

Ø102

Ø20.2

Ø13.0

Direction of travel

2.0

3.25

4.0

Ø1.5

1.4

Preliminary Data Sheet: Rev A 19-04-13

Disclaimer: Subject to change without notice

- 5 of 6 -

857217

742.5 MHz SAW filter

Product Compliance Information

ESD Sensitivity Ratings

Solderability

Compatible with both lead-free (260°C maximum

reflow temperature) and tin/lead (245°C maximum

reflow temperature) soldering processes.

Caution! ESD-Sensitive Device

Refer to Soldering Profile for recommended guidelines.

ESD Rating: Class TBD

Value:

Test:

Standard:

Passes ≥ TBD V

Human Body Model (HBM)

JEDEC Standard JESD22-A114

RoHs Compliance

This part is compliant with EU 2002/95/EC RoHS

directive (Restrictions on the Use of Certain

Hazardous Substances in Electrical and Electronic

Equipment).

ESD Rating: Class TBD

Value:

Passes ≥ TBD V

Test:

Standard:

Charged Device Model (CDM)

JEDEC Standard JESD22-C101

This product also has the following attributes:

•

Lead Free

Halogen Free (Chlorine, Bromine)

Antimony Free

TBBP-A (C₁₅H₁₂Br₄0₂) Free

PFOS Free

SVHC Free

MSL Rating

Not applicable. Hermetic package.

Contact Information

For the latest specifications, additional product information, worldwide sales and distribution locations, and

information about TriQuint:

Web: www.triquint.com

Email: info-sales@tqs.com

Tel:

Fax:

+1.407.886.8860

+1.407.886.7061

For technical questions and application information: Email: flapplication.engineering@tqs.com

Important Notice

The information contained herein is believed to be reliable. TriQuint makes no warranties regarding the information

contained herein. TriQuint assumes no responsibility or liability whatsoever for any of the information contained

herein. TriQuint assumes no responsibility or liability whatsoever for the use of the information contained herein.

The information contained herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated

with such information is entirely with the user. All information contained herein is subject to change without notice.

Customers should obtain and verify the latest relevant information before placing orders for TriQuint products. The

information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any

patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or

anything described by such information.

TriQuint products are not warranted or authorized for use as critical components in medical, life-saving, or life-

sustaining applications, or other applications where a failure would reasonably be expected to cause severe

personal injury or death.

Preliminary Data Sheet: Rev A 19-04-13

Disclaimer: Subject to change without notice

- 6 of 6 -

相关型号：