TQQ7307-EVB [TRIQUINT]
2535 MHz LTE Band 7 Uplink BAW Filter;
| 型号： | TQQ7307-EVB |
| 厂家： | 
TRIQUINT SEMICONDUCTOR |
| 描述： | 2535 MHz LTE Band 7 Uplink BAW Filter LTE |
| 文件： | 总8页 (文件大小：345K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
TQQ7307
2535 MHz LTE Band 7 Uplink BAW Filter
Applications
• LTE Band 7 Uplink Infrastructure
• Base Station
• General Purpose Wireless
6 Pin 3ꢀxꢀ3 mm leadless SMT Package
Product Features
Functional Block Diagram
• 70 MHz Bandwidth
• High Attenuation
• Low Loss
6
5
4
1
Ground
Input
Ground
Output
Ground
• 50 Ohm Input/Output Impedance
• Single-ended Operation
• Small Size: 3 x 3 x 1.02 mm
• Surface Mount Device
• RoHS Compliant, Pb-Free
2
Ground
3
Top View
General Description
Pin Configuration
The TQQ7307 is a general purpose uplink BAW filter for
LTE Band 7. This filter is housed in a compact 3 x 3 mm
package for base station applications.
Pin No.
2
Label
Input
5
Output
Ground
Low insertion loss, coupled with high attenuation makes
this filter an ideal choice for uplink RF filtering needs.
1,3,4,6
The TQQ7307 is part of TriQuint’s extensive portfolio of
RF BAW and SAW filters.
Ordering Information
Part No.
TQQ7307
Description
2535 MHz BAW Filter
TQQ7307-EVB
Evaluation board
Standard T/R size = 2500 pieces on a 7" reel
Advanced Datasheet: Rev B 07-16-14
Disclaimer: Subject to change without notice
- 1 of 8 -
© 2014 TriQuint
www.triquint.com
TQQ7307
2535 MHz LTE Band 7 Uplink BAW Filter
Absolute Maximum Ratings
Recommended Operating Conditions
Parameter
Rating
Parameter
Min Typ Max Units
Storage Temperature
−40 to +95°C
TCASE
−40
+85
°C
RF Input Power
(CW, +55°C for 10,000 hours)
Electrical specifications are measured at specified test
conditions.
+30 dBm
Operation of this device outside the parameter ranges
given above may cause permanent damage.
Electrical Specificationsꢀ(1,2,3)
Test conditions unless otherwise specified: Temp. +25ꢀ°C, ZS=ZL=50 Ohms
Parameter
Conditions
Min
Typ(4)
Max
2570
-
Units
Pass Band Frequency
Center Frequency
3.5 dB Bandwidth
Maximum Insertion Loss
Amplitude Variation(5)
Group Delay Variation(6)
Group Delay Variation(6)
Input VSWR
2500
-
-
-
-
-
-
-
2535
83
2.0
0.9
14
7
1.9:1
1.8:1
MHz
MHz
dB
-
2500 – 2570 MHz
2500 – 2570 MHz
2500 – 2570 MHz
Any 5 MHz band in passband
2500 – 2570 MHz
3.5
2.4
30
13
2.4:1
2.4:1
dB
ns p-p
ns p-p
-
Output VSWR
2500 – 2570 MHz
-
0.9 – 1100 MHz
1100 – 2170 MHz
2170 – 2260 MHz
2260 – 2450 MHz
2450 – 2480 MHz
2590 – 2620 MHz
2620 – 2690 MHz
2690 – 2900 MHz
2900 – 3800 MHz
3800 – 5000 MHz
5000 – 6000 MHz
36
30
38
32
12
8
40
40
30
13
-
40
34
45
39
20
12
48
47
37
17
4
-
-
-
-
-
-
-
-
-
-
-
Stopband Attenuation
(relative to zero dB)
dB
Source/Load Impedance (7) Single ended
-
50
-
Ohms
Notes:
1. All specifications are based on the TriQuint schematic for the main reference design.
2. Production test is performed at room temp. to a guard-banded specification to ensure electrical compliance over temperature.
3. Electrical margin has been built into the design to account for variation due to temperature drift and manufacturing tolerances.
4. Typical values are based on average measurements at room temperature of 25°C.
5. This is defined as the difference between the maximum and minimum insertion loss within the specified band.
6. This is defined as the worst case difference between a peak and adjacent valley within defined frequency points.
7. This is the optimum impedance in order to achieve the performance shown.
Advanced Datasheet: Rev B 07-16-14
Disclaimer: Subject to change without notice
- 2 of 8 -
© 2014 TriQuint
www.triquint.com
TQQ7307
2535 MHz LTE Band 7 Uplink BAW Filter
TQQ7307-PCB Evaluation Board
2
5
Q7307
50
Ω
50
Ω
1,3,4,6
Single-ended
Input
Single-ended
Output
Bill of Material – TQQ7307-PCB
Reference Des.
Value Description
Manuf. Part Number
U1
n/a
n/a
n/a
n/a
n/a
2535 MHz BAW Filter
TriQuint
TriQuint
Radiall
TQQ7307
Printed Circuit Board
SMA Edge Connector
960700
9602-1111-018
Evaluation Board PCB Information
Top, middle & bottom layers: 1 oz copper
Substrates: FR4 dielectric, .031” thick
Finish plating: Nickel: 3-8µm thick, Gold: .03-.2µm thick
Hole plating: Copper min .0008µm thick
Advanced Datasheet: Rev B 07-16-14
Disclaimer: Subject to change without notice
- 3 of 8 -
© 2014 TriQuint
www.triquint.com
TQQ7307
2535 MHz LTE Band 7 Uplink BAW Filter
Performance Plots
Test conditions unless otherwise noted: Temp= +25°C
Frequency Response
Passband Response
0
-1
-1.4
-1.8
-2.2
-2.6
-10
-20
-30
d
B
d
B
-3
-40
-3.4
-3.8
-4.2
-4.6
-5
-50
-60
-70
2335
2385
2435
2485
2535
2585
2635
2685
2735
2482.5
2500
2517.5
2535
2552.5
2570
2587.5
Frequency (MHz)
Frequency (MHz)
WidebandResponse
Input / Output VSWR
0
3
2.6
-10
-20
-30
-40
-50
-60
-70
2.2
1.8
1.4
1
d
B
2482.5
2500
2517.5
2535
2552.5
2570
2587.5
3
2.6
2.2
1.8
1.4
1
0
750
1500
2250
3000
3750
4500
5250
6000
2482.5
2500
2517.5
2535
2552.5
2570
2587.5
Frequency (MHz)
Frequency (MHz)
Output Smith Chart
Input Smith Chart
1
1
0.8
0.6
0.4
0.2
0.8
0.6
0.4
0.2
0
0
0
0
-1
-0 .5
0.5
1
-1
-0 .5
0.5
1
-0 .2
-0 .4
-0 .6
-0 .8
-1
-0 .2
-0 .4
-0 .6
-0 .8
-1
Advanced Datasheet: Rev B 07-16-14
Disclaimer: Subject to change without notice
- 4 of 8 -
© 2014 TriQuint
www.triquint.com
TQQ7307
2535 MHz LTE Band 7 Uplink BAW Filter
Package Marking and Dimensions
3.00±0.10
2x
0.10 C
(1X) 1.400x X 0.600y
0.10
(5X) 0.650x X 0.600y
0.10
A
1.071
0.700
3.00±0.10
C
A B
C
A B
B
2x
PIN 1
0.10 C
1.100
Q7307
3.00±0.10
YYWW
aXXXX
3.00±0.10
Pin #1 Identifier
1.100
1.075
Package Marking
Product Identifier: Q7307
Date Code: YYWW
0.100±0.100
0.100±0.100
BOTTOM VIEW
TOP VIEW
Assembly Code: AaXXXX
0.10
C
C
1.02±0.07
3.00±0.10
SIDE VIEW
Notes:
1. All dimensions are in millimeters
2. All tolerances are ±0.15ꢁmm except overall length and width ±0.10ꢁmm
3. Contact plating : ENIG (Electroless Nickel Immersion Gold)
4. Terminations: 0.5ꢁ–ꢁ1.0ꢁμm Au plating, over a 2ꢁ–ꢁ6ꢁμm Ni plating
PCB Mounting Pattern
Notes:
1. All dimensions are in millimeters. Angles are in degrees.
2. Use 1 oz. copper minimum for top and bottom layer metal.
Advanced Datasheet: Rev B 07-16-14
Disclaimer: Subject to change without notice
- 5 of 8 -
© 2014 TriQuint
www.triquint.com
TQQ7307
2535 MHz LTE Band 7 Uplink BAW Filter
Tape and Reel Information – Carrier and Cover Tape Dimensions
Tape and reel specifications for this part are also available on the TriQuint website.
Standard T/R size = 2500 pieces on a 7” reel.
Feature
Measure
Length
Symbol
Size (in)
0.132
0.132
0.055
0.157
0.079
0.138
0.213
0.315
Size (mm)
3.35
A0
B0
K0
P1
P2
F
Width
3.35
Cavity
Depth
1.40
Pitch
4.00
Cavity to Perforation - Length Direction
2.00
Centerline
Distance
Cavity to Perforation - Width Direction
3.50
Cover Tape
Carrier Tape
Width
Width
C
5.40
W
8.00
Advanced Datasheet: Rev B 07-16-14
Disclaimer: Subject to change without notice
- 6 of 8 -
© 2014 TriQuint
www.triquint.com
TQQ7307
2535 MHz LTE Band 7 Uplink BAW Filter
Tape and Reel Information – Reel Dimensions
Tape and reel specifications for this part are also available on the TriQuint website.
Standard T/R size = 2,500 pieces on a 7” reel.
Feature
Measure
Diameter
Symbol
Size (in)
6.969
Size (mm)
177.0
14.2
A
W2
W1
N
Flange
Thickness
0.559
Space Between Flange
Outer Diameter
Arbor Hole Diameter
Key Slit Width
Key Slit Diameter
0.346
8.8
2.283
58.0
C
0.512
13.0
Hub
B
0.079
2.0
D
0.787
20.0
Advanced Datasheet: Rev B 07-16-14
Disclaimer: Subject to change without notice
- 7 of 8 -
© 2014 TriQuint
www.triquint.com
TQQ7307
2535 MHz LTE Band 7 Uplink BAW Filter
Product Compliance Information
ESD Sensitivity Ratings
Solderability
Compatible with both lead-free (260°C maximum reflow
temperature) and tin/lead (245°C maximum reflow
temperature) soldering processes.
Caution! ESD-Sensitive Device
Contact plating: ENIG (Electroless Nickel Immersion Gold)
ESD Rating: Class 1B
Value:
Test:
Standard:
Passes ≥ 500V to < 1000V
Human Body Model (HBM)
JEDEC Standard JS-001-2012
RoHs Compliance
This part is compliant with EU 2002/95/EC RoHS directive
(Restrictions on the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment).
ESD Rating: Class B
Value:
Passes ≥ 200V to < 400V
Test:
Standard:
Machine Model (MM)
JEDEC Standard JESD22-A115
This product also has the following attributes:
•
•
•
•
•
•
Lead Free
Halogen Free (Chlorine, Bromine)
Antimony Free
TBBP-A (C15H12Br402) Free
PFOS Free
SVHC Free
MSL Rating
MSL Rating: Level 3
Test:
Standard:
260°C convection reflow
JEDEC Standard IPC/JEDEC J-STD-020
Contact Information
For the latest specifications, additional product information, worldwide sales and distribution locations, and information
about TriQuint:
Web: www.triquint.com
Email: info-sales@triquint.com
Tel:
Fax:
+1.407.886.8860
+1.407.886.7061
For technical questions and application information:
Email: flapplication.engineering@triquint.com
Important Notice
The information contained herein is believed to be reliable. TriQuint makes no warranties regarding the information
contained herein. TriQuint assumes no responsibility or liability whatsoever for any of the information contained
herein. TriQuint assumes no responsibility or liability whatsoever for the use of the information contained herein. The
information contained herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated with
such information is entirely with the user. All information contained herein is subject to change without notice.
Customers should obtain and verify the latest relevant information before placing orders for TriQuint products. The
information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any
patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or
anything described by such information.
TriQuint products are not warranted or authorized for use as critical components in medical, life-saving, or life-
sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal
injury or death.
Advanced Datasheet: Rev B 07-16-14
Disclaimer: Subject to change without notice
- 8 of 8 -
© 2014 TriQuint
www.triquint.com
相关型号：
©2020 ICPDF网 联系我们和版权申明