OPB49072T11Z [TTELEC]

Slotted Optical;


型号：	OPB49072T11Z
厂家：	TT Electronics
描述：	Slotted Optical
文件：	总8页 (文件大小：1108K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

 Choice of pins or wires mounꢀng conﬁguraꢀon

 Choice of aperture

 Choice of output conﬁguraꢀon

 Choice of opaque or IR transmissive shell material

 Data rates to 250 kBaud

 Low power consumpꢀon

The OPB460, OPB470, OPB480 and OPB490 series of Photologic® photo integrated circuit switches provide opꢀmum

ﬂexibility for the design engineer. Building from a standard housing with a 0.125” (3.180 mm) wide slot, a user can specify

the type and polarity of TTL output, discrete shell material, aperture width and choice of mounꢀng conﬁguraꢀons. OPB460

through OPB473 have 0.425” (10.795 mm) PCBoard leads with 0.320” (8.1 mm) spacing. OPB480 through OPB493 have

24” (609 mm) 26 AWG wires (UL approved wires).

All devices in this series exhibit performance over supply voltages ranging from 4.5 V to 16.0 V, and may be speciﬁed as

buﬀered or inverted with 10 kW Pull-up or Open Collector output. Devices are also TTI/LSTTL compaꢀble and can drive up

to 10 TTL loads.

Custom electrical, wire and cabling and connectors are available. Contact your local representaꢀve or OPTEK for more

informaꢀon.

Applicaꢀons:

 Mechanical switch replacement

 Speed indicaꢀon (tachometer)

 Mechanical limit indicaꢀon

 Edge sensing

Part Number Guide — OPB460, OPB470, OPB480, OPB490 Series

OPB 4 X X X 1 1 X

OPTEK Assembly

All PCBoard Versions RoHS Compliant:

Z = Wire Version RoHS Compliant

Photologic™ Sensor Family

Sensor Aperture:

Discrete Housing Material:

1 = 0.010” [0.25 mm]

6 — Transmissive Shell, PCBoard Mountable

7 — Opaque Shell, PCBoard Mountable

8 — Transmissive Shell, Wire Termination

9 — Opaque Shell, Wire Termination

Emitter Aperture:

1 = 0.010” [0.25 mm]

Mounting Configurations:

L — Emitter side mounting tab only

N — No mounting tabs

Electrical Specifications:

0 — Buffered 10 kΩ Output

P — Sensor side mounting tab only

T — Two mounting tabs

1 — Buffered Open-Collector Output

2 — Inverted 10 kΩ Output

3 — Inverted Open-Collector Output

RoHS

Color-Pin Descripꢀon

Red-1

Black-2

White-3

Blue-4

Anode

Cathode

Vcc

Output

Ground

Green-5

TOLERANCE DIMENSIONS ARE: ± .25mm [± .010”]

CONTAINS POLYSULFONE

To avoid stress cracking, we suggest using

ND Industries’ Vibra-Tite for thread-locking.

Vibra-Tite evaporates fast without causing structural

failure in OPTEK’s molded plasꢀcs.

Applies to: OPB460, OPB470, OPB480, OPB490.

Storage & Operating Temperature Range

-40° C to +85° C

Lead Soldering Temperature [1/16 inch (1.6mm) from the case for 5 sec. with soldering iron]⁽¹⁾

260°C

Supply Voltage, V_CC(not to exceed 3 seconds)

Diode Forward DC Current

18 V

40 mA

2 V

Diode Reverse DC Voltage

Input Diode Power Dissipaꢀon⁽²⁾

75 mW

Voltage at Output Lead (Open Collector Output)

Output Photologic® Power Dissipaꢀon⁽³⁾

25 V

200 mW

Total Device Power Dissipaꢀon⁽⁴⁾

275 mW

Notes:

(1) RMA ﬂux is recommended. Duraꢀon can be extended to 10 seconds maximum when ﬂow soldering.

(2) Derate linearly 1.67 mW/°C above 25° C (OPB460, OPB470) or derate linearly 1.82 mW/°C above 25° C (OPB480, OPB490).

(3) Derate linearly 1.50 mW/°C above 25° C (OPB460, OPB470) or derate linearly 1.64 mW/°C above 25° C(OPB480, OPB490).

(4) Derate linearly 3.17 mW/°C above 25° C (OPB460, OPB470) or derate linearly 3.45 mW/°C above 25° C (OPB480, OPB490).

(5) The OPB460/OPB470 series are terminated with 0.020” square leads designed for printed circuit board mounꢀng.

(6) The OPB480/OPB490 series of switches are terminated with 24” (609.600 mm) of 7-strand 26 AWG, UL rated insulated wire on each terminal.

Insulaꢀon colors and funcꢀons are: red (anode), black (cathode), white (V_CC,), blue (output) and green (ground). Other wire lengths and/or

colors in addiꢀon to customer selected connectors are available. Contact your local representaꢀve or call the factory.

OPB461/471/481/491 Buffered Open-Collector

OPB460/470/480/490 Buffered 10K Pull-Up

OPB462/472/482/492 Inverted 10K Pull-Up

OPB463/473/483/493 Inverted Open-Collector

V_F

I_R

Forward Voltage

Reverse Current

1.7

I_F= 20 mA, T_A= 25° C

V_R= 2 V, T_A= 25° C

100

µA

Output Photologic® Sensor

V_CCOperating DC Supply Voltage

4.5

Low Level Supply Current:

Buffered with 10k pull-up⁽¹⁾

Buffered Open-Collector Output

7.5

V_CC= 16 V, I_F= 0 mA⁽¹⁾

V_CC= 16 V, I_F= 12 mA

I_CCL

Inverted with 10k pull-up:

Inverted Open-Collector Output

7.5

0.4

High Level Supply Current:

Buffered with 10k pull-up

Buffered Open-Collector Output

V_CC= 16 V, I_F= 12 mA

I_CCH

Inverted with 10k pull-up:

Inverted Open-Collector Output

V_CC= 16 V, I_F= 0 mA⁽¹⁾

V_CC= 4.5 V, I_OL= 16 mA, I_F= 0 mA

V_CC= 4.5 V, I_F= 12 mA⁽¹⁾

Low Level Output Voltage:

Buffered with 10k pull-up

Buffered Open-Collector Output

V_OL

Inverted with 10k pull-up:

Inverted Open-Collector Output

0.4

High Level Output Voltage:

Buffered with 10k pull-up

V_CC

-1.5

V_CC= 4.5 V to 16 V, No Load, I_F= 12

V_OH

Inverted with 10k pull-up:

V_CC

-1.5

V_CC= 4.5 V to 16 V, No Load, I_F= 0

Inverted Open-Collector Output⁽¹⁾

High Level Output Voltage:

Buffered Open-Collector Output

V_CC= 16 V, I_F= 12 mA, V_OH= 25 V,

T_A= 25° C

µA

I_OH

Inverted with 10k pull-up:

V_CC= 16 V, I_F= 0 mA, V_OH= 25 V,

T_A= 25° C

Inverted Open-Collector Output⁽¹⁾

I_F(+)

LED Positive-Going Threshold Current

Hysteresis

V_CC= 5 V, T_A= 25° C

I_{F(+)/ F(-)}

t_rt_f

t_{PLH PHL}

1.4

V_CC= 5 V

Rise Time, Fall Time

Propagation Delay

µs

V_CC= 5 V, T_A= 25° C, I_F= 0 or 12 mA

R_L= 300 Ω to 5 V, C_L= 50 pF

Notes:

(1) Normal application would be with light source blocked, simulated by I_F= 0 mA.

(2) All parameters tested using pulse technique.

OPB480T55 - Flag Next to Emitter

OPB480T55 - Flag Next to Sensor

1.20

1.00

0.80

0.60

0.40

0.20

0.00

1.20

1.00

0.80

0.60

0.40

0.20

0.00

Top to Bottom (Back)

Top to Bottom

Top to Bottom (Back)

Top to Bottom

Right to Left

Right to Left (Back)

Left to Right

Left to Right (Back)

0.00

0.05

0.10

0.15

0.20

0.25

0.00

0.05

0.10

0.15

0.20

0.25

Displacement Distance (inches)

OPB480T55 - Flag in Middle of Slot

1.20

1.00

0.80

0.60

0.40

0.20

0.00

Top to Bottom (Back)

Top to Bottom

Right to Left

Right to Left (Back)

Emitter

Left to Right

Right to Left

Sensor

Left to Right

Left to Right (Back)

Width

0.00

0.05

0.10

0.15

0.20

0.25

Displacement Distance (inches)

OPB481N51 - Flag Next to Emitter

OPB481N51 - Flag Next to Sensor

1.20

1.00

0.80

0.60

0.40

0.20

0.00

1.20

1.00

0.80

0.60

0.40

0.20

0.00

Top to Bottom (Back)

Top to Bottom

Top to Bottom (Back)

Top to Bottom

Right to Left

Right to Left (Back)

Left to Right

Left to Right (Back)

0.00

0.05

0.10

0.15

0.20

0.25

0.00

0.05

0.10

0.15

0.20

0.25

Displacement Distance (inches)

OPB481N51 - Flag in Middle of Slot

1.20

1.00

0.80

0.60

0.40

0.20

0.00

Top to Bottom (Back)

Top to Bottom

Right to Left

Right to Left (Back)

Emitter

Left to Right

Right to Left

Left to Right

Sensor

Left to Right (Back)

Width

0.00

0.05

0.10

0.15

0.20

0.25

Displacement Distance (inches)

OPB460N11 - Flag Next to Sensor

OPB460N11 - Flag Next to Emitter

1.20

1.00

0.80

0.60

0.40

0.20

0.00

1.20

1.00

0.80

0.60

0.40

0.20

0.00

Top to Bottom (Back)

Top to Bottom

Top to Bottom (Back)

Top to Bottom

Right to Left

Right to Left (Back)

Left to Right

0.00

0.05

0.10

0.15

0.20

0.25

0.00

0.05

0.10

0.15

0.20

0.25

Displacement Distance (inches)

OPB460N11 - Flag in Middle of Slot

1.20

1.00

0.80

0.60

0.40

0.20

0.00

Top to Bottom (Back)

Top to Bottom

Right to Left

Right to Left (Back)

Emitter

Left to Right

Right to Left

Left to Right

Sensor

Left to Right

Width

0.00

0.05

0.10

0.15

0.20

0.25

Displacement Distance (inches)

相关型号：