OPB773NZ [TTELEC]
Photologic Reflective Object Sensor;型号: | OPB773NZ |
厂家: | TT Electronics |
描述: | Photologic Reflective Object Sensor 传感器 换能器 |
文件: | 总7页 (文件大小:398K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Photologic® Reflective Object
Sensor
OPB760, OPB761, OPB762, OPB763 (Series N and T)
OPB770, OPB771, OPB772, OPB773 (Series NZ and TZ)
Features:
OPB760N
•
•
•
•
Choice of mounting configurations
Choice of four output configurations
.040” (10.160 mm) PCBoard mount (N and T series)
12” (304.800 mm) AWG 26 wires (NZ and TZ series)
OPB775TZ
Description:
The OPB760N, OPB760T, OPB770N and OPB770T series of reflecꢀve assemblies feature Photologic® output. The electrical
output can be specified as either TTL Totem-Pole or TTL Open-Collector, either of which can be supplied with inverter or
buffer output polarity.
OPB760N and OPB760T series devices are designed for PCBoard mounꢀng and have 0.04” (10 mm) long leads.
OPB760T and OPB770T series devices are designed for remote mounꢀng with two mounꢀng tabs.
OPB770NZ and OPB770TZ series devices have 12” (305 mm) long, UL approved 26 AWG wires.
All devices in this series offer the added stability of a built-in hysteresis amplifier.
Custom electrical, wire and cabling and connectors are available. Contact your local representaꢀve or OPTEK for more
informaꢀon.
Ordering Information
Part
LED Peak
Sensor
Reflection Distance
(Inch) Min / Max
Applications:
Number Wavelength
OPB760N
Photologic®
Mounting
•
Non-contact Photologic®
Totem-Pole
Open Collector
Inv-Totem-Pole
Inv-Open Collector
Totem-Pole
Open Collector
Inv-Totem-Pole
Inv-Open Collector
Totem-Pole
reflective object sensor
Assembly line automation
Machine automation
Machine safety
OPB761N
OPB762N
OPB763N
OPB760T
OPB761T
OPB762T
OPB763T
OPB770NZ
•
•
•
•
•
PCBoard .40”
(10.160 mm)
leads)
End of travel sensor
Door sensor
890 nm
0.080" / 0.220”
OPB771NZ
OPB772NZ
OPB773NZ
OPB770TZ
OPB771TZ
OPB772TZ
OPB773TZ
Open Collector
Inv-Totem-Pole
Inv-Open Collector
Totem-Pole
Open Collector
Inv-Totem-Pole
Inv-Open Collector
12” (304.800 mm)
26 AWG wire
RoHS
General Note
OPTEK Technology, Inc.
1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200
www.optekinc.com | www.ttelectronics.com
TT Electronics reserves the right to make changes in product specification without
notice or liability. All information is subject to TT Electronics’ own data and is
considered accurate at time of going to print.
Issue C 05/2016 Page 1
© TT electronics plc
Photologic® Reflective Object
Sensor
OPB760, OPB761, OPB762, OPB763 (Series N and T)
OPB770, OPB771, OPB772, OPB773 (Series NZ and TZ)
Electrical Specifications
OPB760, OPB770 Buffered Totem-Pole
OPB761, OPB771 Buffered Open Collector
VCC
VCC
OUT
OUT
GND
GND
OPB762, OPB772 Inverted Totem-Pole
OPB763, OPB773 Inverted Open-Collector
VCC
VCC
OUT
OUT
GND
GND
General Note
OPTEK Technology, Inc.
1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200
www.optekinc.com | www.ttelectronics.com
TT Electronics reserves the right to make changes in product specification without
notice or liability. All information is subject to TT Electronics’ own data and is
considered accurate at time of going to print.
Issue C 05/2016 Page 2
© TT electronics plc
Photologic® Reflective Object
Sensor
OPB760, OPB761, OPB762, OPB763 (Series N and T)
OPB770, OPB771, OPB772, OPB773 (Series NZ and TZ)
Electrical Specifications
OPB760 (N and T Series)
OPB770 (NZ and TZ Series)
[ MILLIMETERS]
INCHES
DIMENSIONS ARE IN:
X = 0.08” [2.0mm] to 0.22” [5.6mm]
Pin # Description
Pin#
Description
Ground
Output
Color/Pin# Description Color/Pin# Description
Red-4
Anode
White-1
Blue-2
VCC
1
2
Cathode
Anode
3
4
5
Black-5
Cathode
Output
Ground
Green-3
VCC
General Note
OPTEK Technology, Inc.
1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200
www.optekinc.com | www.ttelectronics.com
TT Electronics reserves the right to make changes in product specification without
notice or liability. All information is subject to TT Electronics’ own data and is
considered accurate at time of going to print.
Issue C 05/2016 Page 3
© TT electronics plc
Photologic® Reflective Object
Sensor
OPB760, OPB761, OPB762, OPB763 (Series N and T)
OPB770, OPB771, OPB772, OPB773 (Series NZ and TZ)
Electrical Specifications
Absolute Maximum Ratings (TA=25°C unless otherwise noted)
Supply Voltage, VCC (not to exceed 3 seconds)
Storage Temperature Range
10 V
-40° C to +85° C
-40° C to +70° C
260° C
Operating Temperature Range
Lead Soldering Temperature (1/16” inch (1.6 mm) from case for 5 seconds with soldering iron)(1)
Input Diode Power Dissipation(2)
100 mW
200 mW
300 mW
35 V
Output Photologic® Power Dissipation(3)
Total Device Power Dissipation(4)
Voltage at Output Lead (Open Collector Output)
Diode Forward DC Current
40 mA
Diode Reverse DC Voltage
3 V
Electrical Characteristics (TA = 25°C unless otherwise noted)
SYMBOL
PARAMETER
MIN TYP MAX UNITS
TEST CONDITIONS
Input Diode
VF
IR
Forward Voltage
Reverse Current
-
-
-
-
1.8
V
IF = 40 mA, TA = 25° C
VR = 2.0 V, TA = 25° C
100
μA
Output Photologic® Sensor
VCC Operating DC Supply Voltage
4.75
-
5.25
V
Low Level Supply Current:
Buffered Totem-Pole Output(5)(6)
Buffered Open-Collector Output(5)(6)
-
-
-
-
10
10
mA
mA
Vcc = 5.25 V, If = 0 mA (output open)
Vcc = 5.25 V, If = 25 mA (output open)
ICCL
Inverted Totem-Pole Output(5)
-
-
-
-
10
10
mA
mA
Inverted Open-Collector Output(5)
High Level Supply Current:
Buffered Totem-Pole Output(5)(6)
Buffered Open-Collector Output(5)
-
-
-
-
10
10
mA
mA
Vcc = 5.25 V, If = 25 mA (output open)
Vcc = 5.25 V, If = 0 mA (output open)
ICCH
Inverted Totem-Pole Output(5)(6)
-
-
-
-
10
10
mA
mA
Inverted Open-Collector Output(5)(6)
High Level Output Current:
-
-
-
-
100
100
μA
μA
Vcc = 4.5 V, If = 25 mA, VOH = 30 V, TA=25°C
Vcc = 4.5 V, If = 0 mA, VOH = 30 V, TA = 25°C
Buffered Open-Collector Output
IOH
Inverted Open-Collector Output
-
-
100
μA
Notes:
(1) RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering.
(2) Derate linearly 2.22 mW/°C above 25° C.
(3) Derate linearly 4.44 mW/°C above 25° C.
(4) Derate linearly 6.66 mW/°C above 25° C.Normal application would be with light source blocked, simulated by IF=0 mA.
(5) Tested at d = 0.080” (mm) from a 90% diffuse white test surface.
(6) Normal application would be with light source blocked, simulated by IF = 0 mA.
(7) All parameters tested using pulse technique.
General Note
OPTEK Technology, Inc.
1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200
www.optekinc.com | www.ttelectronics.com
TT Electronics reserves the right to make changes in product specification without
notice or liability. All information is subject to TT Electronics’ own data and is
considered accurate at time of going to print.
Issue C 05/2016 Page 4
© TT electronics plc
Photologic® Reflective Object
Sensor
OPB760, OPB761, OPB762, OPB763 (Series N and T)
OPB770, OPB771, OPB772, OPB773 (Series NZ and TZ)
Electrical Specifications
Electrical Characteristics (TA = 25°C unless otherwise noted)
SYMBOL
PARAMETER
MIN TYP MAX UNITS
TEST CONDITIONS
Output Photologic® Sensor (continued)
IF(+)
LED Positive-Going Threshold Current(2)
-
-
-
25
mA
-
Vcc = 5 V, TA = 25° C
IF(+)/IF(-)
Hysteresis(2)
1.1
2.0
Vcc = 5 V
Short Circuit Output Current:
Buffered Totem-Pole Output(1)
If = 25 mA, Vcc = 5.25 V, Output = GRD
If = 0 mA, Vcc = 5.25 V, Output = GRD
-15
-15
-
-
-100
-100
mA
mA
IOS
Inverted Totem-Pole Output(1)
Low Level Output Voltage:
Buffered Totem-Pole Output(1)(4)
Buffered Open-Collector Output(1)(4)
-
-
-
-
0.4
0.4
V
V
VCC = 4.5 V, IOL = 12.8 mA, IF = 0 mA or IF =
30 mA
VOL
Inverted Totem-Pole Output
-
-
-
-
0.4
0.4
V
V
VCC = 4.5 V, IOL = 12.8 mA, IF = 25 mA
Inverted Open-Collector Output(1)(4)
High Level Output Voltage:
VCC = 4.5 V, IOH = -800 μA, IF = 25 mA
VCC = 4.5 V, IOH = -800 μA, IF = 0 mA
Buffered Totem-Pole Output(1)
2.4
2.4
-
-
-
-
V
V
Inverted Totem-Pole Output(1)(4)
VOH
Inverted Totem-Pole Output (3)
Inverted Open-Collector Output(3)
2.4
2.4
-
-
-
-
V
V
VCC = 4.5 V, IOH = -800 μA, IF = 30 mA
Notes:
(1) Tested at d = 0.080” (mm) from a 90% diffuse white test surface.
(2) Tested at d = 0.080” (mm), 0.150” (mm) and 0.220” (mm) from a 90% diffuse white test surface. Reference: Eastman Kodak,
Catalog #E 152 7795.
(3) Tested at d = 0.080” (mm), 0.150” (mm) and 0.220” (mm) from a 5% diffuse black test surface.
(4) Normal application would be with light source blocked, simulated by IF=0 mA.
(5) OPB760N through OPB763N series devices are terminated with 0.20” (mm) square leads designed for printed PCBoard mounting.
(6) OPB770NZ through OPB773NZ series devices are terminated with 12 inches (mm) of 7-strand 26 AWG UL1429 insulated wire on
each terminal. A standard AMP No. 640442-5 connector has been attached to the lead wires to ease connection to wire
harnesses.
(7) OPB760T through OPB763T series devices are terminated with 0.020” (mm) square leads designed for printed PCBoard
mounting.
(8) OPB770TZ through OPB773TZ series are terminated with 12” (mm) of 7-strand 26 AWG UL1429 insulated wire on each terminal.
A standard AMP No. 640442-5 connector has been attached to the lead wires to ease connection to wire harnesses.
(9) All parameters tested using pulse technique.
General Note
OPTEK Technology, Inc.
1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200
www.optekinc.com | www.ttelectronics.com
TT Electronics reserves the right to make changes in product specification without
notice or liability. All information is subject to TT Electronics’ own data and is
considered accurate at time of going to print.
Issue C 05/2016 Page 5
© TT electronics plc
Photologic® Reflective Object
Sensor
OPB760, OPB761, OPB762, OPB763 (Series N and T)
OPB770, OPB771, OPB772, OPB773 (Series NZ and TZ)
Performance
Logic Level vs Distance
Logic Level vs Distance
1
1
0
1
0
Kodak 90% - Towards
Copy Paper - Towards
Copy Paper - Away
Kodak 90% - Away
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.0
0.1
0.2
0.3
0.4
0.5
0.6
Distance (inches)
Distance (inches)
Logic Level vs Distance
Logic Level vs Distance
1
0
1
0
Kodak 19% - Towards
Avery Labels - Towards
Avery Labels - Away
Kodak 19% - Away
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.0
0.1
0.2
0.3
0.4
0.5
0.6
Distance (inches)
Distance (inches)
General Note
OPTEK Technology, Inc.
1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200
www.optekinc.com | www.ttelectronics.com
TT Electronics reserves the right to make changes in product specification without
notice or liability. All information is subject to TT Electronics’ own data and is
considered accurate at time of going to print.
Issue C 05/2016 Page 6
© TT electronics plc
Photologic® Reflective Object
Sensor
OPB760, OPB761, OPB762, OPB763 (Series N and T)
OPB770, OPB771, OPB772, OPB773 (Series NZ and TZ)
Performance
Typical Trigger Current and Hysteresis Ratio
vs Ambient Temperature
Logic Level vs Distance
1
0
14
12
10
8
IF(+) mA
IF(-) mA
Hys
Retro 3M 3870 - Towards
6
Retro 3M 3870 - Away
4
2
0
-40 -30 -20 -10
0
10 20 30 40 50 60 70 80
0.0
0.1
0.2
0.3
0.4
0.5
0.6
Distance (inches)
Ta - Ambient Temperature (°C)
Output Voltage vs Ambient Temperature
Supply Current vs Ambient Temperature
18
16
14
12
10
8
9
8
7
6
5
4
3
2
1
0
6
4
Icch(mA)
Voh (V)
Iccl(mA)
Vol (V)
2
0
-40
-20
0
20
40
60
80
-40
-20
0
20
40
60
80
Ta -Ambient Temperature - (°C)
Ta -Ambient Temperature - (°C)
General Note
OPTEK Technology, Inc.
1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200
www.optekinc.com | www.ttelectronics.com
TT Electronics reserves the right to make changes in product specification without
notice or liability. All information is subject to TT Electronics’ own data and is
considered accurate at time of going to print.
Issue C 05/2016 Page 7
© TT electronics plc
相关型号:
©2020 ICPDF网 联系我们和版权申明