OPB800L51Z [TTELEC]
Wide Gap Slotted Optical Switch;型号: | OPB800L51Z |
厂家: | TT Electronics |
描述: | Wide Gap Slotted Optical Switch |
文件: | 总5页 (文件大小:666K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Wide Gap Slotted Optical
Switch
OPB800 (L and W Series)
W Package
Features:
0.375” (9.525 mm) wide gap
Choice of aperture size
Choice of minimum photocurrent
Choice of opaque or IR transmissive shells
Available for PCBoard mounꢁng or with 24” 26 AWG wires
L Package
Descripꢀon:
The OPB800L series, PCBoard mounꢁng, of wide gap switch provides the flexibility of a custom device from a standard
product line, while the OPB800W series, remote mounted, switch offers 24” (610 mm) 26 AWG wire interconnect.
Building from a standard housing that uꢁlizes a 0.375” (9.5 mm) wide slot, a user can specify the electrical output
parameters, discrete shell material and the aperture width.
Housings are made from an opaque grade of injecꢁon-molded plasꢁc that minimizes the assembly’s sensiꢁvity to visible and
near-infrared ambient radiaꢁon. Discrete shells, which are exposed on parallel faces inside the device throat, are made of
IR transmissive plasꢁc (for applicaꢁons where aperture contaminaꢁon may occur) or of opaque plasꢁc with aperture
openings (for maximum protecꢁon against ambient light).
Applicaꢀons:
Non-contact interrupꢁve object sensing
Assembly line automaꢁon
Machine automaꢁon
Equipment security
Machine safety
Part Number Guide
OPB 8 X X X X X Z
For “W” series only
Sensor Aperture:
Optek Assembly
1 — 0.010” (.254 mm)
5 — 0.050” (1.270 mm)
Phototransistor Output Family
Emitter Aperture:
5 — 0.050” (1.270 mm)
Discrete Shell Material:
0 — Transmissive plastic
Discrete shell
1 — Opaque plastic
Discrete shell
Mounting configurations:
L — Solder lead termination
W — Wire termination
Electrical Specification Variations:
0 = Electrical Parameter A
1 = Electrical Parameter B
2 = Electrical Parameter C
Note: Assemblies with 0.010” apertures are
currently available with electrical
parameter “A” only.
Wires = 26AWG—24” Long
General Note
TT Electronics | Optek Technology, Inc.
1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200
www.ꢀelectronics.com | sensors@ꢀelectronics.com
TT Electronics reserves the right to make changes in product specificaꢁon without
noꢁce or liability. All informaꢁon is subject to TT Electronics’ own data and is
considered accurate at ꢁme of going to print.
Issue B 11/2016 Page 1
© TT electronics plc
Wide Gap Slotted Optical
Switch
Electrical Specificaꢀons
Absolute Maximum Raꢀngs (TA=25°C unless otherwise noted)
Storage and Operaꢁng Temperature
L Series
W Series
-40° C to +85° C
-40° C to +80° C
Lead Soldering Temperature [1/16 inch (1.6mm) from the case for 5 sec. with soldering iron](2)
260° C
Input Diode
Forward DC Current
50 mA
3 A
Peak Forward Current (1 µs pulse width, 300 pps)
Reverse DC Voltage
2 V
Power Dissipaꢁon(1)
100 mW
Output Phototransistor
Collector-Emiꢀer Voltage
Emiꢀer-Collector Voltage
Collector DC Current
30 V
5 V
30 mA
100 mW
Power Dissipaꢁon(1)
1
3
Color/Pin # Description
Red-1
Black-2
White-3
Green-4
Anode
Cathode
Collector
Emitter
2
4
General Note
TT Electronics | Optek Technology, Inc.
1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200
TT Electronics reserves the right to make changes in product specificaꢁon without
noꢁce or liability. All informaꢁon is subject to TT Electronics’ own data and is
considered accurate at ꢁme of going to print.
www.ꢀelectronics.com | sensors@ꢀelectronics.com
Issue B 11/2016 Page 2
© TT electronics plc
Wide Gap Slotted Optical
Switch
Electrical Characterisꢀcs (TA = 25°C unless otherwise noted)
SYMBOL
PARAMETER
MIN
TYP
MAX UNITS
TEST CONDITIONS
Input Diode
VF
IR
Forward Voltage
Reverse Current
-
-
-
-
1.7
V
IF = 20 mA
VR = 2 V
100
µA
Output Phototransistor
V(BR)CEO
V(BR)ECO
ICEO
Collector-Emiꢀer Breakdown Voltage
30
5
-
-
-
-
-
V
V
IC = 1 mA
IE = 100 µA
VCE = 10 V
Emiꢀer-Collector Breakdown Voltage
Collector-Emiꢀer Dark Current
-
100
nA
Combined
Collector-Emiꢀer Saturaꢁon Voltage
Parameter A
Parameter B
Parameter C
(OPB800,OPB810)
(OPB801,OPB811)
(OPB802,OPB812)
-
-
-
-
-
-
0.4
0.4
0.6
V
V
V
IC = 250 µA, IF = 20 mA
IC = 500 µA, IF = 10 mA
IC = 1800 µA, IF = 20 mA
VCE(SAT)
On-State Collector Current
Parameter A
Parameter B
Parameter C
(OPB800,OPB810)
(OPB801,OPB811)
(OPB802,OPB812)
0.625
1.25
2.25
-
-
-
-
-
-
VCE = 10 V, IF = 20 mA
VCE = 5 V, IF = 10 mA
VCE = 0.6 V, IF = 20 mA
IC(ON)
mA
Notes:
(1) Derate linearly 1.67 mW/° C above 25° C.
(2) RMA flux is recommended. Duraꢁon can be extended to 10 seconds maximum when flow soldering.
(3) All parameters tested using pulse technique.
(4) Methanol or isopropanol are recommended as cleaning agents. Plasꢁc housing is soluble in chlorinated hydrocarbons and ketones.
(5) The W Series includes wire terminaꢁons of 24” (610 mm) 7-strand, 26 AWG UL insulated wire on each terminal. Each device incorporates a wire
strain relief at the housing surface. The insulaꢁon funcꢁons and colors are: anode (red), cathode (black), phototransistor collector (white) and
phototransistor emiꢀer (green).
General Note
TT Electronics | Optek Technology, Inc.
1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200
www.ꢀelectronics.com | sensors@ꢀelectronics.com
TT Electronics reserves the right to make changes in product specificaꢁon without
noꢁce or liability. All informaꢁon is subject to TT Electronics’ own data and is
considered accurate at ꢁme of going to print.
Issue B 11/2016 Page 3
© TT electronics plc
Wide Gap Slotted Optical
Switch
OPB800_51 - Flag Next to Emitter
1.2
OPB800_51 - Flag Next to Sensor
1.2
1.0
0.8
0.6
0.4
0.2
0.0
Top to Bottom
Top to
1.0
0.8
Left to Right
Right to Left
Left to Right
Right to Left
0.6
0.4
0.2
0.0
Right to Left
Right to Left
Left to Right
Left to Right
Top to Bottom
Top to Bottom
0.00
0.05
0.10
0.15
0.20
0.25
0.00
0.05
0.10
0.15
0.20
0.25
Displacement Distance (inches)
Distance (inches)
OPB800_51 - Flag in Middle of Slot
1.2
1.0
0.8
0.6
0.4
0.2
0.0
Top to
Top to Bottom
0
Left to Right
Right to Left
Emitter
Left to Right
Right to Left
Right to Left
Left to Right
Sensor
Top to Bottom
0
Width
0.00
0.05
0.10
0.15
0.20
0.25
Distance (inches)
General Note
TT Electronics | Optek Technology, Inc.
1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200
TT Electronics reserves the right to make changes in product specificaꢁon without
noꢁce or liability. All informaꢁon is subject to TT Electronics’ own data and is
considered accurate at ꢁme of going to print.
www.ꢀelectronics.com | sensors@ꢀelectronics.com
Issue B 11/2016 Page 4
© TT electronics plc
Wide Gap Slotted Optical
Switch
OPB800_55 - Flag Next to Emitter
1.2
OPB800_55 - Flag Next to Sensor
1.2
1.0
0.8
0.6
0.4
0.2
0.0
Top to
Top to
1.0
0.8
Left to Right
Right to Left
Left to Right
Right to Left
0.6
0.4
0.2
0.0
Right to Left
Right to Left
Left to Right
Left to Right
Top to Bottom
Top to Bottom
0.00
0.05
0.10
0.15
0.20
0.25
0.00
0.05
0.10
0.15
0.20
0.25
Distance (inches)
Distance (inches)
OPB800_55 - Flag in Middle of Slot
1.2
1.0
0.8
0.6
0.4
0.2
0.0
Top to
Top to Bottom
0
Left to Right
Right to Left
Emitter
Left to Right
Right to Left
Right to Left
Left to Right
Sensor
Top to Bottom
0
Width
0.00
0.05
0.10
0.15
0.20
0.25
Distance (inches)
General Note
TT Electronics | Optek Technology, Inc.
1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200
TT Electronics reserves the right to make changes in product specificaꢁon without
noꢁce or liability. All informaꢁon is subject to TT Electronics’ own data and is
considered accurate at ꢁme of going to print.
www.ꢀelectronics.com | sensors@ꢀelectronics.com
Issue B 11/2016 Page 5
© TT electronics plc
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明