OPIA403B [TTELEC]
SMD, SOP and SSOP Packages;
| 型号： | OPIA403B |
| 厂家： | 
TT Electronics |
| 描述： | SMD, SOP and SSOP Packages |
| 文件： | 总31页 (文件大小：2083K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
Features:
•
•
•
•
2,500 or 3,750 Vrms electrical isolation
Choice of a Single and Dual LED
Phototransistor or Photo Darlington Sensor
Low-cost plastic Dual-In-Line (DIP) package
Agency Approvals:
•
•
UL Certification No: E58730
VDE No: 40026577(OPIA401-404), 40026553(OPIA405-409)
Description:
The OPIA series optocouplers are designed for applications that use an analog output (Phototransistor or
Photodarlington) in a surface mount package. A wide selection of configurations are available. With typical
isolation voltage of 2,500 or 3,750 Volts(RMS), these products meet typical power system isolation requirements.
Theory of operation: The LED transmitter is used to illuminate the Photo sensor providing electrical isolation
between two power systems while maintaining the ability to transmit information from one power system to the
other. In many applications, analog signal levels may be required to be transmitted between two power systems
while maintaining isolation between the power systems up to 3,750 Volts(RMS). A variety of LED and photo
sensor configurations are available depending on the system requirements.
The Current Transfer Ratio (CTR) is determined using the output current and input current for analog photo
sensors. CTR ratios can range from as low as 5 to over 9,000 depending on the device.
Photosensor − Current 20mA
CTR =
=
*100 = 200
LED − Current
10mA
All SMD products are shipped in a shipping tube with “TR” identified on the end of the part number.
Example: OPI401ATRE is a 4-Pin SMD shipped in tape and reel (TR)
Applications:
• High voltage isolation: 2,500 or 3,750 Volts(RMS)
• PCBoard power system isolation
• Industrial equipment power isolation
• Medical equipment power isolation
• Office equipment
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
RoHS
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Issue B
9/2010
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Page 1 of 31
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
Package Outline Dimensions and Schematics: Top-View
Package Style B
Package Style C
(SOP)
(SSOP)
Package Style A
Pin #
Part Number
(SMD)
1
2
3
4
OPIA401B
OPIA402B
OPIA403B
OPIA404B
OPIA405C
OPIA406C
OPIA407C
OPIA408C
OPIA409C
OPIA414B
A
A-K
A
K
K-A
K
E
E
E
E
E
E
E
E
E
E
C
C
C
C
C
C
C
C
C
C
A
K
A
A
K
K-A
K
A-K
A
A
K
A
K
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue B 9/2010
Page 2 of 31
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
Analog Output Devices Ordering Information
Isolation Voltage
Max. (Vrms)
CTR
Min/Typ/Max
Typ. Tr / Tf (µs)
RL = 100 ohms
Part Number
Package
Configuration
OPIA401B
OPIA402B
3,750
3,750
3,750
3,750
2,500
2,500
2,500
2,500
2,500
2,500
2,500
1,000 / - / -
20 / - 400
100 / 20
4 / 3
4-Pin SOP
4-Pin SOP
4-Pin SOP
4-Pin SOP
4-Pin SSOP
4-Pin SSOP
4-Pin SSOP
4-Pin SSOP
4-Pin SSOP
4-Pin SSOP
4-Pin SSOP
A K—C E (Dar)
A K, K A—C E
A K—C E (Dar)
A K—C E
OPIA403B
600 / 1,600 / 7,500
50 / - / 600
60 / 53
5 / 4
OPIA404B
OPIA405CxxA
OPIA405CxxB
OPIA405CxxC
OPIA405CxxD
OPIA405CxxE
OPIA406C
80 / - / 160
3 / 5
A K—C E
130 / - / 260
200 / - / 400
300 / - / 600
50 / - / 600
3 / 5
A K—C E
3 / 5
A K—C E
3 / 5
A K—C E
3 / 5
AK—CE
200 / 2,000 / -
80 / - / 600
200 / 200
3 / 5
A K—C E (Dar)
A K, K A—C E
OPIA407CxxE
OPIA408C
2,500
200 / 2,000 / -
200 / 200
4-Pin SSOP
A K—C E (Dar)
OPIA409C
OPIA414B
2,500
3,750
400 / 2,000 -
100 / - / 600
40 / 10
4 / 3
4-Pin SSOP
4-Pin SOP
A K—C E (Dar)
A K—C E
Configuration: Definition of Terms
LED Identification—Sensor Identification
LED
A = Anode
B = Base
K = Cathode
C = Collector
Configuration
Information
Sensor
E = Emitter
(Dar) = Photodarlington
Example: OPIA405CTUE
Part Number Suffix: TU = Shipped in Tubes
Packaging
TR = Tape & Reel
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue B
9/2010
Page 3 of 31
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
Absolute Maximum Ratings (TA = 25o C unless otherwise noted)
Storage Temperature
OPIA404, OPIA414
OPIA401, OPIA402, OPIA403
OPIA405, OPIA406, OPIA407, OPIA408, OPIA409
-55° C to +125° C
-40°C to +125° C
-55°C to +150° C
Operating Temperature
All except the part numbers noted below
OPIA404
-30° C to +100° C
-55° C to +115° C
-30° C to +115° C
OPIA414
Isolation voltage (1 minute)
OPIA400
5,000 Vrms
3,750 Vrms
2,500 Vrms
OPIA401, OPIA402, OPIA403, OPIA404, OPIA414
OPIA405, OPIA406, OPIA407, OPIA408, OPIA409
Total Package Power Dissipation
OPIA401, OPIA402, OPIA403, OPIA404, OPIA414
OPIA405
170 mW
160 mW
-
OPIA406, OPIA407, OPIA408, OPIA409
Lead Soldering Temperature (1/16” (1.6 mm) from case for 5 seconds with soldering iron)
260° C
Input Diode
Continuous Forward Current
All except the part number noted below
OPIA414
50 mA
10 mA
Peak Forward current (1 µs pulse width, 300 pps)
All except the part number noted below
OPIA414
1 A
200 mA
Reverse Voltage
OPIA401, OPIA403, OPIA404, OPIA405, OPIA406, OPIA409, OPIA414
OPIA402, OPIA407, OPIA408, OPIA409, OPIA410, OPIA412
6 V
-
Power Dissipation
OPIA401, OPIA402, OPIA403, OPIA404
OPIA405, OPIA406, OPIA407, OPIA408, OPIA409
OPIA414
70 mW
60 mW
15 mW
Output Phototransistor
Collector-Emitter Voltage
OPIA402, OPIA404
OPIA401, OPIA409
OPIA403
60 V
300 V
35 V
OPIA406, OPIA408
OPIA405, OPIA407, OPIA414
40 V
80 V
Emitter-Collector Voltage
OPIA405, OPIA406, OPIA407, OPIA408
OPIA401
OPIA402, OPIA403, OPIA404
OPIA409
6 V
0.1 V
5 V
0.3 V
7 V
OPIA414
Collector Current
OPIA402, OPIA404, OPIA405, OPIA407, OPIA414
OPIA401, OPIA403
OPIA406, OPIA408
50 mA
150 mA
90 mA
60 mA
OPIA409
Power Dissipation
All except the part numbers noted below
OPIA405, OPIA406, OPIA407, OPIA408, OPI409
150 mW
120 mW
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue B 9/2010
Page 4 of 31
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
Electrical Characteristics
SYMBOL
PARAMETER
MIN
TYP MAX UNITS
TEST CONDITIONS
Input Diode
Forward Voltage
All except those noted below
OPIA404
OPIA405, OPIA406, OPIA407, OPIA408
OPIA401, OPIA409, OPIA414
-
-
-
-
1.2
1.6
1.1
1.2
1.4
1.75
1.4
IF = 20 mA
IF = 10 mA
IF = 5 mA
IF = 10 mA
I
VF
V
V
1.4
Peek Forward Voltage
OPIA403
OPIA405
OPI401, OPIA404, OPIA414, OPIA406,
OPIA407, OPIA408, OPIA409
-
-
-
-
-
-
3.5
3.0
-
VFM
IFM = 500 mA
Reverse Current
-
-
-
-
10
-
VR = 4 V
-
All except those noted below
OPIA404, OPIA407, OPIA408, OPIA414
OPIA405, OPIA406, OPIA409
IR
µA
pf
-
-
5
VR = 5 V
Terminal Capacitance
All except those noted below
OPIA402, OPIA404, OPIA414
OPIA408, OPIA409
-
-
-
30
30
60
-
250
-
V = 0.0 V, f = 1K Hz
V = 0.0 V, f = 1K Hz
V = 0.0 V, f = 1M Hz
Ct
Output Phototransistor
Collector dark Current
OPIA400, OPIA402, OPIA404
OPIA405, OPIA407
OPIA414
-
-
-
-
-
-
100
100
100
IF = 0 mA, VCE = 20 V
IF = 0 mA, VCE = 80 V
IF = 0 mA, VCE = 50 V
ICEO
nA
V
Collector-emitter Saturation Voltage
OPIA405, OPIA407
OPIA402, OPIA404, OPIA410
OPIA414
-
-
-
0.1
0.1
0.1
0.3
0.3
0.2
IF = 10 mA, IC = 2 mA
IF = 20 mA, IC = 1 mA
IF = 10 mA, IC = 1 mA
VCE(SAT)
Cutt-Off frequency
fC
All except those noted below
-
-
-
K Hz
µs
VCC = 5 V, IC = 2 mA, RL = 100 Ω
Rise Time
VCC = 2 V, IC = 2 mA, RL = 100 Ω
VCC = 5 V, IC = 2 mA, RL = 100 Ω
VCC = 2 V, IC = 2 mA, RL = 100 Ω
OPIA402, OPIA414
OPIA405, OPIA407
OPIA404
-
-
-
4
3
5
18
18
20
tR
Fall Time
VCC = 2 V, IC = 2 mA, RL = 100 Ω
VCC = 5 V, IC = 2 mA, RL = 100 Ω
VCC = 2 V, IC = 2 mA, RL = 100 Ω
OPIA402, OPIA414
OPIA405, OPIA407
OPIA404
-
-
-
3
5
4
18
18
20
tF
µs
Continued on Next Page
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue B
9/2010
Page 5 of 31
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
Electrical Characteristics (OPIA400 Series) - Continued from Previous Page
SYMBOL
PARAMETER
MIN
TYP MAX UNITS
TEST CONDITIONS
Output PhotoDarlington
Collector dark Current
OPIA401
OPIA403
OPIA406, OPIA408
OPIA409
-
-
-
-
-
-
-
-
1.0
1.0
0.4
0.4
IF = 0 mA, VCE = 200 V
ICEO
IF = 0 mA, VCE = 10 V
IF = 0 mA, VCE = 40 V
IF = 0 mA, VCE = 300 V
µA
Collector-emitter Saturation Voltage
OPIA403
OPIA406, OPIA408, OPIA409
OPIA401
-
-
-
-
-
1.0
1.0
1.5
IF = 20 mA, IC = 1 mA
IF = 1 mA, IC = 2 mA
IF = 20 mA, IC = 100 mA
VCE(SAT)
0.8
V
Cut-Off frequency
OPIA401, OPIA406, OPIA408, OPIA409
OPIA403
-
V
-
-
-
-
fC
1.0
7.0
K Hz
CC = 5 V, IC = 2 mA, RL = 100 Ω
Rise Time
OPIA401
OPIA403
OPIA406, OPIA408
OPIA409
VCC = 2 V, IC = 20 mA, RL = 100 Ω
VCC = 2 V, IC = 2 mA, RL = 100 Ω
VCC = 5 V, IC = 2 mA, RL = 100 Ω
VCC = 5 V, IC = 10 mA, RL = 100 Ω
-
-
-
-
100
60
200
40
300
300
-
-
tR
µs
µs
Fall Time
OPIA401
OPIA403
OPIA406, OPIA408
OPIA409
VCC = 2 V, IC = 20 mA, RL = 100 Ω
VCC = 2 V, IC = 2 mA, RL = 100 Ω
VCC = 5 V, IC = 2 mA, RL = 100 Ω
VCC = 5 V, IC = 10 mA, RL = 100 Ω
-
-
-
-
20
53
200
10
100
250
-
-
tF
Coupled Characteristics
Current Transfer Ratio
OPIA404
OPIA401
OPIA402
OPIA403
OPIA405(See Table, page 3)
OPIA406, OPIA408
OPIA407
OPIA409
OPIA414
50
1,000
20
600
50
20
0.3
400
100
-
-
-
-
-
600
-
400
7,500
600
-
3.0
-
600
IF = 5.00 mA, VCE = 5.0 V
IF = 1.00 mA, VCE = 2.0 V
IF = 1.00 mA, VCE = 5.0 V
IF = 1.00 mA, VCE = 2.0 V
IF = 5.00 mA, VCE = 5.0 V
IF = 1.00 mA, VCE = 2.0 V
IF = 5.00 mA, VCE = 5.0 V
IF = 1.00 mA, VCE = 2.0 V
IF = 1.00 mA, VCE = 5.0 V
CTR
%
2,000
1.0
2,000
-
Floating Capacitance
OPIA405, OPIA406, OPIA407,
OPIA408, OPIA409
-
-
0.6
0.4
1.0
-
Cf
pF
V = 0.0 V, f = 1M Hz
RISO
Isolation resistance
5X1010 1011
-
ohm C500V, 40% to 60%RH
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue B 9/2010
Page 6 of 31
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
OPIA401
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue B
9/2010
Page 7 of 31
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
OPIA401
Forward Current—IF(mA)
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue B 9/2010
Page 8 of 31
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
OPIA402
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue B
9/2010
Page 9 of 31
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
OPIA402
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue B 9/2010
Page 10 of 31
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
OPIA403
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue B
9/2010
Page 11 of 31
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
OPIA403
Forward Current—IF(mA)
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue B 9/2010
Page 12 of 31
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
OPIA404
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue B
9/2010
Page 13 of 31
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
OPIA404
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue B 9/2010
Page 14 of 31
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
OPIA405
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue B
9/2010
Page 15 of 31
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
OPIA405
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue B 9/2010
Page 16 of 31
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
OPIA406
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue B
9/2010
Page 17 of 31
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
OPIA406
Forward Current—IF(mA)
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue B 9/2010
Page 18 of 31
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
OPIA407
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue B
9/2010
Page 19 of 31
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
OPIA407
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue B 9/2010
Page 20 of 31
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
OPIA408
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue B
9/2010
Page 21 of 31
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
OPIA408
Forward Current—IF(mA)
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue B 9/2010
Page 22 of 31
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
OPIA409
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue B
9/2010
Page 23 of 31
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
OPIA409
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue B 9/2010
Page 24 of 31
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
OPIA414
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue B
9/2010
Page 25 of 31
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
OPIA414
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue B 9/2010
Page 26 of 31
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
Quality / Reliability Requirements
Parameter
Conditions
11 samples after 500Hrs
@ VCE = 5.0VDC, Ta = 70°C
50 samples after 96Hrs
Failure Criteria
± 10%
HTRB D IC(OFF)
0 Fail
± 10%
HTFB D IC(ON)
0 Fail
@ Max PD, Ta = 25°C
MTTF @ 90% confidence
Moisture Sensitivity Level
Lead Solderability
150,000 Min.
MSL 1
@ 25°C, 25mADC
per JDEC stnd J-STD-020B
per Method 208 of MIL-STD-202.
DSC test method
0 Fail
Glass Transition of body
Temperature Humidity-Bias
Temperature Cycle
125°C Min.
± 20%
85°C, 85%RH, 500Hrs, 80% min Iceo
per Method 1010.7 of MIL-STD-883E
85°C, 500Hrs
± 20%
High Temperature Storage
± 20%
TA = 121°C, Pressure = 15psi, Humidity
= 100%, Time = 96Hrs
Autoclave
0 Fail
Note: This is to be performed when a change occurs to form, fit or function.
Government and Industry Standard
Compliance Requirements
European Union’s Reduction of Hazardous Substances (RoHS) Directive 2002/95/EC
Label Identification
DESCRIPTION:
Carrollton, TX, USA
MADE IN TAIWAN
OPTEK P/N __OPIA407C-TR__
Size: 3” (7.4 cm) X 2.2” (5.5 cm)
Lettering shall be black on white background.
Format shall be as:
IIIIIIIIIIIIIIIIIIIII
QTY. ________N/A_________
Notes:
1. The DATE CODE is a 4-digit code for date of manufacture where YY is
the last two digits of the year, and WW is week number of manufacture.
2. The LOT I.D. is the manufacturing location lot identification where Y is
the year of manufacture, NNNN is a sequential lot identifier, and DDD is
the day of the year of manufacture. – or use equivalent label format.
IIIIIIIIIIIIIIIIIIIII
DATE CODE _____(YYWW)___
IIIIIIIIIIIIIIIIIIIII
LOT I.D. ____(Y-NNNNDDD)__
IIIIIIIIIIIIIIIIIIIII
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue B
9/2010
Page 27 of 31
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
Tube Packaging Information:
Tube
Inner
Small Carton
Medium Carton
Large Carton
53.5 x 30.7 x 25 cm
Gross
52 x 7 x 7.5
cm
53.5 x 30.7 x 17.5
cm
53.5 x 16 x 17.5 cm
Optek's Optocoupler
Part Numbers
Packaging
Quantities
Qty Weight
Gross
Weight
Gross
Qty Weight
Weight
Weig
Qty Weight Qty Weight
Qty Weight
ht
4-PIN
OPIA400D/A
P/H
100
44
3,000 1.40 12,000 6.0
6.5 24,000 12.0
12.5 36,000 18.0 18.5
6-PIN
OPIA6XXD/A Series
and
SMD
65
48
44
44
1,950 1.50 7,800
1,440 1.44 5,760
6.5
6.0
7.0 15,600 12.0
6.5 11,520 12.0
12.5 23,400 18.5 19.0
12.5 17,290 18.0 18.5
8-PIN
OPIA8XXD Series and OPID804D
M/F
4-PIN and 5-PIN
100
170
24
--
6,000 1.60 24,000 6.5
7.0 48,000 13.0
13.5 72,000 19.5 20.0
OPIA401B - OPIA404B, OPIA414B,
OPIA500B
SOP
4-PIN
10,200
--
SSOP
OPIA405C - OPIA409C
P/H = Pin-Hole Packages (Referred as D = Dual-In-Line Package)
SMD = Standard Surface Mount Packages (Referred as A = 6.5mil SMD)
M/F or SOP = Mini-Flat Packages or Small Outside Packages (Referred as B = 4.40mil SMD w/ 2.54mil Lead-
Spacing)
SSOP = Shrink SOP Packages (Referred as C = 3.60mil SMD with 1.27mil Lead-Spacing)
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue B 9/2010
Page 28 of 31
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
Tube Packaging Specifications—SMD— (TU):
DIMENSIONS ARE IN: INCHES [MILLIMETERS]
Quantity: 4-pin (SMD): 100pcs/tube
TOLERANCE: ± 0.008 INCHES
[± 0.2 MILLIMETERS]
Tube Packaging Specifications— SOP (Mini-flats) and SSOP— (TU):
Quantity: 4-pin (SOP): 100pcs/tube
4-pin (SSOP): 170pcs/tube
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue B
9/2010
Page 29 of 31
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
Tape and Reel Packaging Specifications— SMD and SOP—(TR):
Tape Feeder:
Direction:
Quantity: 4-pin (SMD): 1000pcs/Reel
4-pin (SOP): 1000pcs/Reel
DIMENSIONS ARE IN: INCHES [MILLIMETERS]
TOLERANCE: ± 0.008 INCHES
4-pin (SSOP): 3000pcs/Reel
[± 0.2 MILLIMETERS]
Reel:
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue B 9/2010
Page 30 of 31
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
Tape and Reel Packaging Specifications— SSOP—(TR):
.078±0.008
Ø.059±0.004
[2.0±0.02]
.157±0.008
[4.0±0.02 ]
[Ø1.50±0.05]
0.068±0.008
[1.75 ±0.02]
Ø.059±0.004
[Ø1.50±0.05]
0.088±0.008 [2.25 ±0.02]
.157±0.008]
[4.0±0.02]
.100±0.008
[2.55±0.02]
Direction:
DIMENSIONS ARE IN: INCHES [MILLIMETERS]
TOLERANCE: ± 0.008 INCHES
[± 0.2 MILLIMETERS]
Reel:
Ø.531±0.02
[Ø13.5±0.5]
Ø.098±0.02
[2.5±0.5]
.511±0.04 [13±0.5]
.629±0.04 [16.0±0.5]
Ø.826±0.04 [Ø21±1.0]
Quantity: 4-pin (SSOP): 2000pcs/Reel
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue B
9/2010
Page 31 of 31
相关型号：
©2020 ICPDF网 联系我们和版权申明