OPIA5010 [TTELEC]
SMD and SOP Packages;型号: | OPIA5010 |
厂家: | TT Electronics |
描述: | SMD and SOP Packages |
文件: | 总23页 (文件大小:2043K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
OPIA500B, OPIA4N35, OPIA4N33
OPIA2110, OPIA2210, OPIA5010, OPIA6010
SMD and SOP Packages
5 Pin
Features:
•
•
•
•
3,750 or 5,000 Vrms electrical isolation
Choice of a Single and Dual LED
Phototransistor or Photo Darlington Sensor
Low-cost plastic Dual-In-Line (DIP) package
Agency Approvals:
•
•
UL Certification No: E58730
VDE No: 40026624,40026625
6 Pin
Description:
The OPIA series optocouplers are designed for applications that use an analog output (Phototransistor or Photo
Darlington) in a dual-in-line package. A wide selection of configurations are available. With typical isolation
voltage of 3,750 or 5,000 Volts(RMS), these product meet typical power system isolation requirements.
Theory of operation: The LED transmitter is used to illuminate the Photosensor providing electrical isolation
between two power systems while maintaining the ability to transmit information from one power system to the
other. In many applications, analog signal levels may be required to be transmitted between two power systems
while maintaining isolation between the power systems up to 5,000 Volts(RMS). A variety of LED and
photosensor configurations are available depending on the system requirements.
The ratio Current Transfer Ratio (CTR) is determined using the output current and input current for analog
photosensors. CTR ratios can range from as low as 5 to over 9,000 depending on the device.
Photosensor −Current 20mA
CTR =
=
*100 = 200
LED−Current
10mA
All SMD product is shipped in tape and reel with “TR” identified on the end of the part number.
Example: OPI4N35ATRE is a 6-Pin SMD shipped in tape and reel (TR).
.
• Industrial equipment power isolation
• Medical equipment power isolation
• Office equipment
Applications:
• High voltage isolation
• PCBoard power system isolation
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
RoHS
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A.6 5/10
Page 1 of 23
OPIA500B, OPIA4N35, OPIA4N33
OPIA2110, OPIA2210, OPIA5010, OPIA6010
SMD and SOP Packages
Package Outline Dimensions and Schematics: Top-View
Package Style B
(SOP)
OPIA500
Package Style A
(SMD)
OPIA60X
Pin #
Part Number
1
A
2
3
4
E
E
E
E
E
E
E
5
6
B
B
B
B
B
B
OPIA500
OPIA4N35
OPIA5010
OPIA4N33
OPIA2210
OPIA6010
OPIA2110
K
C
C
C
C
C
C
C
A
K
K
A
A
K
A
K
A-K
A
K-A
K
Symbol
Definition
Anode
Symbol
B
Definition
Base
Symbol
C
Definition
Collector
Symbol
E
Definition
Emitter
Symbol
K
Definition
Cathode
A
Analog Output Devices Ordering Information
Isolation Voltage
Max. (Vrms)
3,750
CTR
Min/Typ/Max
19 / - / 50
60 / - / 600
600 / - / 9,000
500 / 4,000 / -
50 / - / 600
50 / - / 600
40 / - / 400
Typ. Tr / Tf (µs)
RL = 100 ohms
LH-HL 0.8 / 0.8 (1.9K)
Part Number
Package
Configuration
OPIA500B
OPIA4N35A
OPIA5010A
OPIA4N33A
OPIA2210A
OPIA6010A
OPIA2110A
5-Pin SOP
6-Pin SMD
6-Pin SMD
6-Pin SMD
6-Pin SMD
6-Pin SMD
6-Pin SMD
AK—KCE
A K—B C E
A K—B C E (Dar)
A K—B C E (Dar)
A K—B C E
5,000
5,000
5,000
5,000
5,000
5,000
5 / 4
60 / 50
5 / 60
2 / 3
2 / 3
4 / 3
A K, K A—B C E
A K—C E
Configuration: Definition of Terms
LED Identification—Sensor Identification
LED
A = Anode
B = Base
K = Cathode
C = Collector
Sensor
E = Emitter
(Dar) = Photo Darlington
Example: OPI4N35ATRE
Packaging
Part Number Suffix: TU = Ship in Tubes TR = Tape and Reel
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.6 5/10
Page 2 of 23
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
OPIA500B, OPIA4N35, OPIA4N33
OPIA2110, OPIA2210, OPIA5010, OPIA6010
SMD and SOP Packages
Absolute Maximum Ratings (TA = 25o C unless otherwise noted)
Storage Temperature
-55° C to +125° C
Operating Temperature
OPIA4N35, OPIA5010, OPIA4N33
OPIA500
-30° C to +100° C
-55° C to +85° C
-55° C to +125° C
OPIA2210, OPIA6010, OPIA2110
Isolation voltage (1 minute)
OPIA6XX Series
OPIA500
5,000 Vrms
3,750 Vrms
Total Package Power Dissipation
OPIA6XX Series
OPIA500
200 mW
100 mW
Lead Soldering Temperature (1/16” (1.6 mm) from case for 5 seconds with soldering iron)
260° C
Input Diode
Continuous Forward Current
OPIA6XX Series
OPIA500
50 mA
25 mA
Peak Forward current (1 µs pulse width, 300 pps)
OPIA6XX Series
OPIA500
1 A
200 mA
Reverse Voltage
OPIA6XX Series
OPIA500
6 V
5 V
Power Dissipation
OPIA6XX Series
OPIA500
70 mW
45 mW
Output Phototransistor
Collector-Emitter Voltage
OPIA4N35, OPIA6010, OPIA2110
OPIA2210
OPIA5010
OPIA4N33
60 V
350 V
300 V
30 V
Emitter-Collector Voltage
OPIA4N35, OPIA2110
OPIA2210, OPIA6010
OPIA5010, OPIA4N33
6 V
7 V
-
Collector Current
OPIA4N35, OPIA2210, OPIA6010, OPIA2110
OPIA5010, OPIA4N33
50 mA
150 mA
Power Dissipation
OPIA500
100 mW
150 mW
200 mW
OPIA4N35, OPIA2110
OPIA5010, OPIA4N33, OPIA2210, OPIA6010
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A.6 5/10
Page 3 of 23
OPIA500B, OPIA4N35, OPIA4N33
OPIA2110, OPIA2210, OPIA5010, OPIA6010
SMD and SOP Packages
Electrical Characteristics: (OPIA500B)
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.6 5/10
Page 4 of 23
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
OPIA500B, OPIA4N35, OPIA4N33
OPIA2110, OPIA2210, OPIA5010, OPIA6010
SMD and SOP Packages
Electrical Characteristics (OPIA6XX Series)
SYMBOL
PARAMETER
MIN
TYP MAX UNITS
TEST CONDITIONS
Input Diode
Forward Voltage
OPIA4N35, OPIA5010, OPIA4N33,
OPIA604, OPIA2110
OPIA2210
-
1.2
1.2
1.4
1.3
IF = 20 mA
IF = 10 mA
Vf
VFM
Ir
V
V
1.0
Peek Forward Voltage
OPIA4N35, OPIA5010, OPIA4N33,
OPIA604
-
-
-
-
3.5
3.0
I
FM = 500 mA
OPIA2210, OPIA2110
Reverse Current
OPIA4N35, OPIA5010, OPIA4N33,
OPIA604, OPIA2110
OPIA2210
-
-
-
-
10
10
VR = 4 V
VR = 5 V
µA
pf
Terminal Capacitance
OPIA4N35, OPIA5010, OPIA4N33,
OPIA604, OPIA2110
OPIA2210
-
-
30
30
-
-
V = 0.0 V, f = 1K Hz
V = 0.0 V, f = 1M Hz
Ct
Output Phototransistor—OPIA4N35D, OPIA2210D, OPIA6010D, OPIA2110D
Collector dark Current
ICEO
OPIA4N35, OPIA6010, OPIA2110
OPIA2210
-
-
-
10
100
200
IF = 0 mA, VCE = 20 V
IF = 0 mA, VCE = 300 V
nA
Collector-emitter Saturation Voltage
OPIA4N35, OPIA6010, OPIA2110
OPIA2210
VCEO
fC
-
-
0.1
-
0.3
0.4
IF = 20 mA, IC = 1 mA
IF = 8 mA, IC = 2.4 mA
V
Cutt-Off frequency
-
80
-
K Hz
VCC = 5 V, IC = 2 mA, RL = 100 Ω
Rise Time
OPIA4N35, OPIA6010
OPIA2210
VCC = 5 V, IC = 2 mA, RL = 100 Ω
VCC = 10 V, IC = 2 mA, RL = 100 Ω
VCC = 2 V, IC = 2 mA, RL = 100 Ω
-
-
-
5
2
4
20
-
20
tr
µs
µs
OPIA2110
Fall Time
OPIA4N35, OPIA6010
OPIA2210
VCC = 5 V, IC = 2 mA, RL = 100 Ω
VCC = 10 V, IC = 2 mA, RL = 100 Ω
VCC = 2 V, IC = 2 mA, RL = 100 Ω
-
-
-
4
3
3
20
-
20
tf
OPIA2110
Continued on Next Page
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A.6 5/10
Page 5 of 23
OPIA500B, OPIA4N35, OPIA4N33
OPIA2110, OPIA2210, OPIA5010, OPIA6010
SMD and SOP Packages
Electrical Characteristics (OPIA6XX Series) - Continued from Previous Page
SYMBOL
PARAMETER
MIN
TYP MAX UNITS
TEST CONDITIONS
Output PhotoDarlington—OPIA5010D, OPIA4N332D
Collector dark Current
ICEO
OPIA5010
OPIA4N33
-
-
-
-
1.0
0.1
IF = 0 mA, VCE = 200 V
IF = 0 mA, VCE = 10 V
µA
Collector-emitter Saturation Voltage
OPIA5010
OPIA4N33
VCEO
-
-
-
-
1.5
1.0
IF = 20 mA, IC = 5 mA
IF = 8 mA, IC = 2 mA
V
K Hz
µs
Cutt-Off frequency
OPIA5010, OPIA4N33
fC
-
7.0
-
VCC = 5 V, IC = 2 mA, RL = 100 Ω
Rise Time
OPIA5010
OPIA4N33
tr
-
-
60
5
300
40
VCC = 2 V, IC = 20 mA, RL = 100 Ω
VCC = 10 V, IC = 50 mA, RL = 100 Ω
Fall Time
OPIA5010
OPIA4N33
tf
-
-
50
60
250
100
VCC = 2 V, IC = 20 mA, RL = 100 Ω
VCC = 10 V, IC = 50 mA, RL = 100 Ω
µs
Coupled Characteristics Phototransistor/Photodarlington
Current Transfer Ratio
OPIA4N35
OPIA5010
OPIA4N33
OPIA2210
OPIA6010
OPIA2110
60
600
500
50
60
40
-
-
600
9,000
-
600
600
400
IF = 2 mA, VCE = 5.0 V
IF = 2 mA, VCE = 5.0 V
IF = 10 mA, VCE = 10.0 V
IF = 5 mA, VCE = 5.0 V
IF = 1 mA, VCE = 5.0 V
IF = 10 mA, VCE = 5.0 V
CTR
4,000
%
-
-
-
Cf
Floating Capacitance
Isolation resistance
-
0.6
1.0
-
pF
V = 0.0 V, f = 1M Hz
RISO
5X1010 1011
ohm DC500V
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.6 5/10
Page 6 of 23
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
OPIA500B, OPIA4N35, OPIA4N33
OPIA2110, OPIA2210, OPIA5010, OPIA6010
SMD and SOP Packages
OPIA4N35
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Issue A.6 5/10
Page 7 of 23
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
OPIA500B, OPIA4N35, OPIA4N33
OPIA2110, OPIA2210, OPIA5010, OPIA6010
SMD and SOP Packages
OPIA4N35
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.6 5/10
Page 8 of 23
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
OPIA500B, OPIA4N35, OPIA4N33
OPIA2110, OPIA2210, OPIA5010, OPIA6010
SMD and SOP Packages
OPIA5010
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Issue A.6 5/10
Page 9 of 23
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
OPIA500B, OPIA4N35, OPIA4N33
OPIA2110, OPIA2210, OPIA5010, OPIA6010
SMD and SOP Packages
OPIA5010
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.6 5/10
Page 10 of 23
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
OPIA500B, OPIA4N35, OPIA4N33
OPIA2110, OPIA2210, OPIA5010, OPIA6010
SMD and SOP Packages
OPIA4N33
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Issue A.6 5/10
Page 11 of 23
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
OPIA500B, OPIA4N35, OPIA4N33
OPIA2110, OPIA2210, OPIA5010, OPIA6010
SMD and SOP Packages
OPIA4N33
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.6 5/10
Page 12 of 23
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
OPIA500B, OPIA4N35, OPIA4N33
OPIA2110, OPIA2210, OPIA5010, OPIA6010
SMD and SOP Packages
OPIA2210
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Issue A.6 5/10
Page 13 of 23
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
OPIA500B, OPIA4N35, OPIA4N33
OPIA2110, OPIA2210, OPIA5010, OPIA6010
SMD and SOP Packages
OPIA2210
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.6 5/10
Page 14 of 23
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
OPIA500B, OPIA4N35, OPIA4N33
OPIA2110, OPIA2210, OPIA5010, OPIA6010
SMD and SOP Packages
OPIA6010
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Issue A.6 5/10
Page 15 of 23
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
OPIA500B, OPIA4N35, OPIA4N33
OPIA2110, OPIA2210, OPIA5010, OPIA6010
SMD and SOP Packages
OPIA6010
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.6 5/10
Page 16 of 23
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
OPIA500B, OPIA4N35, OPIA4N33
OPIA2110, OPIA2210, OPIA5010, OPIA6010
SMD and SOP Packages
OPIA2110
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Issue A.6 5/10
Page 17 of 23
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
OPIA500B, OPIA4N35, OPIA4N33
OPIA2110, OPIA2210, OPIA5010, OPIA6010
SMD and SOP Packages
OPIA2110
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.6 5/10
Page 18 of 23
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
OPIA500B, OPIA4N35, OPIA4N33
OPIA2110, OPIA2210, OPIA5010, OPIA6010
SMD and SOP Packages
Quality / Reliability Requirements
Parameter
Conditions
11 samples after 500Hrs
@ VCE = 5.0VDC, Ta = 70°C
50 samples after 96Hrs
Failure Criteria
± 10%
HTRB D IC(OFF)
0 Fail
± 10%
HTFB D IC(ON)
0 Fail
@ Max PD, Ta = 25°C
MTTF @ 90% confidence
Moisture Sensitivity Level
Lead Solderability
150,000 Min.
MSL 1
@ 25°C, 25mADC
per JDEC stnd J-STD-020B
per Method 208 of MIL-STD-202.
DSC test method
0 Fail
Glass Transition of body
Temperature Humidity-Bias
Temperature Cycle
125°C Min.
± 20%
85°C, 85%RH, 500Hrs, 80% min Iceo
per Method 1010.7 of MIL-STD-883E
85°C, 500Hrs
± 20%
High Temperature Storage
± 20%
TA = 121°C, Pressure = 15psi, Humidity
= 100%, Time = 96Hrs
Autoclave
0 Fail
Note: This is to be performed when a change occurs to form, fit or function.
Government and Industry Standard
Compliance Requirements
European Union’s Reduction of Hazardous Substances (RoHS) Directive 2002/95/EC
Label Identification
DESCRIPTION:
Carrollton, TX, USA
MADE IN TAIWAN
OPTEK P/N __OPIA2110A-TR__
Size: 3” (7.4 cm) X 2.2” (5.5 cm)
Lettering shall be black on white background.
Format shall be as:
IIIIIIIIIIIIIIIIIIIII
QTY. ________N/A_________
Notes:
1. The DATE CODE is a 4-digit code for date of manufacture where YY is
the last two digits of the year, and WW is week number of manufacture.
2. The LOT I.D. is the manufacturing location lot identification where Y is
the year of manufacture, NNNN is a sequential lot identifier, and DDD is
the day of the year of manufacture. – or use equivalent label format.
IIIIIIIIIIIIIIIIIIIII
DATE CODE _____(YYWW)___
IIIIIIIIIIIIIIIIIIIII
LOT I.D. ____(Y-NNNNDDD)__
IIIIIIIIIIIIIIIIIIIII
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A.6 5/10
Page 19 of 23
OPIA500B, OPIA4N35, OPIA4N33
OPIA2110, OPIA2210, OPIA5010, OPIA6010
SMD and SOP Packages
Packaging Information:
Tube
Inner
Small Carton
Medium Carton
Large Carton
53.5 x 30.7 x 25 cm
Gross
52 x 7 x 7.5
cm
53.5 x 30.7 x 17.5
cm
53.5 x 16 x 17.5 cm
Optek's Optocoupler
Part Numbers
Packaging
Quantities
Qty Weight
Gross
Weight
Gross
Qty Weight
Weight
Weig
Qty Weight Qty Weight
Qty Weight
ht
4-PIN
100
44
3,000 1.40 12,000 6.0
6.5 24,000 12.0
12.5 36,000 18.0 18.5
OPIA400D/A, OPIA410D/A -
OPIA413D/A
P/H
and
SMD
6-PIN
OPIA6XXD/A Series
65
48
44
44
1,950 1.50 7,800
1,440 1.44 5,760
6.5
6.0
7.0 15,600 12.0
6.5 11,520 12.0
12.5 23,400 18.5 19.0
12.5 17,290 18.0 18.5
8-PIN
OPIA8XXD Series and OPID804D
M/F
4-PIN and 5-PIN
100
170
24
--
6,000 1.60 24,000 6.5
7.0 48,000 13.0
13.5 72,000 19.5 20.0
OPIA401B - OPIA404B, OPIA414B,
OPIA500B
SOP
4-PIN
10,200
--
SSOP
OPIA405C - OPIA409C
P/H = Pin-Hole Packages (Referred as D = Dual-In-Line Package)
SMD = Standard Surface Mount Packages (Referred as A = 6.5mil SMD)
M/F or SOP = Mini-Flat Packages or Small Outside Packages (Referred as B = 4.40mil SMD w/ 2.54mil Lead-
Spacing)
SSOP = Shrink SOP Packages (Referred as C = 3.60mil SMD with 1.27mil Lead-Spacing)
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.6 5/10
Page 20 of 23
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
OPIA500B, OPIA4N35, OPIA4N33
OPIA2110, OPIA2210, OPIA5010, OPIA6010
SMD and SOP Packages
Tube Packaging Specifications—SMD (TU):
DIMENSIONS ARE IN: INCHES [MILLIMETERS]
Quantity: 6-pin: 65pcs/tube
TOLERANCE: ± 0.008 INCHES
[± 0.2 MILLIMETERS]
Tube Packaging Specifications— SOP (Mini-flats) (TU):
DIMENSIONS ARE IN: INCHES [MILLIMETERS]
TOLERANCE: ± 0.008 INCHES
[± 0.2 MILLIMETERS]
Quantity: 5-pin: 100pcs/tube
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A.6 5/10
Page 21 of 23
OPIA500B, OPIA4N35, OPIA4N33
OPIA2110, OPIA2210, OPIA5010, OPIA6010
SMD and SOP Packages
Tape and Reel Packaging Specifications—SMD —(TR):
0.157 ± 0.004
[4.0 ± 0.1]
0.059± 0.002
[1.55 ± 0.05]
0.079± 0.004
[2.0 ± 0.1]
Reel:
0.167 ± 0.004
[4.25 ± 0.1]
0.295± 0.004
[12.0 ± 0.1]
0.069 ± 0.004
[1.75 ± 0.1]
0.630 ± 0.01
[16.0 ± 0.3]
0.303 ± 0.004
[7.70 ± 0.1]
0.063 ± 0.004
[1.6 ± 0.1]
0.412 ± 0.004
[10.46 ± 0.1]
0.472 ± 0.004
[12.0 ± 0.1]
0.014 ± 0.002
[0.35 ± 0.05]
Direction:
DIMENSIONS ARE IN: INCHES [MILLIMETERS]
TOLERANCE: ± 0.008 INCHES
[± 0.2 MILLIMETERS]
0.059 ± 0.020
[1.5 ± 1.0]
Reel:
0.65 ± 0.08
[16.40 ± 2.0]
0.511 ± 0.020
[13.0 ± 0.5]
12.99 ± 0.008
[330.0 ± 0.2]
4.0 ± 0.04
[101.6 ± 1.0]
0.079 ± 0.008
[2.0 ± 0.2]
0.795 ± 0.04
[20.2 ± 1.0]
Quantity: 6-pin: 1000pcs/Reel
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.6 5/10
Page 22 of 23
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
OPIA500B, OPIA4N35, OPIA4N33
OPIA2110, OPIA2210, OPIA5010, OPIA6010
SMD and SOP Packages
Tape and Reel Packaging Specifications—SOP (Mini-Flat) — (TR):
0.059± 0.002
[1.55 ± 0.05]
0.100 ± 0.004
[2.55 ± 0.1]
0.295± 0.004
[12.0 ± 0.1]
0.157 ± 0.004
[4.0 ± 0.1]
0.079± 0.004
[2.0 ± 0.1]
0.069 ± 0.004
[1.75 ± 0.1]
0.630 ± 0.01
0.297 ± 0.004
[7.30 ± 0.1]
[16.0 ± 0.3]
0.059 ± 0.004
[1.5 ± 0.1]
0.012 ± 0.004
[0.3 ± 0.01]
0.315 ± 0.004
[8.0 ± 0.1]
0.145 ± 0.004
[4.1 ± 0.1]
Direction:
DIMENSIONS ARE IN: INCHES [MILLIMETERS]
TOLERANCE: ± 0.008 INCHES
[± 0.2 MILLIMETERS]
Reel:
0.059 ± 0.020
[1.5 ± 1.0]
0.65 ± 0.08
[16.40 ± 2.0]
0.511 ± 0.020
[13.0 ± 0.5]
12.99 ± 0.008
[330.0 ± 0.2]
4.0 ± 0.04
[101.6 ± 1.0]
0.079 ± 0.008
[2.0 ± 0.2]
0.795 ± 0.04
[20.2 ± 1.0]
Quantity: 5-pin: 1000pcs/Reel
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A.6 5/10
Page 23 of 23
相关型号:
©2020 ICPDF网 联系我们和版权申明