OSSRD1006A [TTELEC]
Solid State Relays;
| 型号： | OSSRD1006A |
| 厂家： | 
TT Electronics |
| 描述： | Solid State Relays |
| 文件： | 总15页 (文件大小：586K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Solid State Relays
4-Pin SIP Package—VDC Input / VAC Output
OSSRD1001A thru OSSRD1006A
Features:
•
•
•
•
•
•
•
Molded Epoxy package
Zero crossing circuit
High Input/output Optical Isolation 4k Vrms
Small size and light weight
Can be installed directly on the P.C. board
Fast switching time
Non-contact switch
Approval Agency:
•
UL Cert. No: E321810(1001A,1002A,1003A only)
Description:
The OSSR Solid State Relay series are electronic controlled switches, they contain no moving parts.
When voltage is applied to the input, a Light Emitting Diode or LED illuminates a Photosensor which
controls the internal output circuit. The output circuit is utilized to drive high current loads. The input
and output are optically isolated. The OSSR series incorporates a zero crossing circuit which minimizes
current and noise surges due to resistive and inductive loads. Optek provides three different electrical
configurations of the OSSR series: DC input – AC output, AC input – AC output and DC input – DC
output. These configurations meet most industry applications.
The OSSRD100XA family comes in a standard 4-pin SIP, Single In-Line Package, for PCB mounting
applications. The package offers a light weight, compact and robust molded epoxy body with extended
operating temperature range of up to 100°C.
The input circuit features a DC range from 5 to 12 VDC. The output consists of a Triac circuit featuring
load current ratings from 3 to 40 Amps and a maximum load voltage of 250VAC with normally open
output.
Applications:
•
•
•
•
•
•
•
•
•
•
Temperature controlled systems
Office equipment
Motor controls
Industrial Equipment
Light controls systems
Heater control
Appliances
HVAC temperature control
Plastic molding
Packaging industry
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A.3 11/09
Page 1 of 15
Solid State Relays
4-Pin SIP Package—VDC Input / VAC Output
OSSRD1001A thru OSSRD1006A
Package Outline: 4-Pin SIP
Tolerance: 0.2mm [millimeters]
All dimensions in Inches [millimeters]
Schematic: Top View
+
-
+
-
LOAD
INPUT
OSSRD1001A— OSSRD1006A
Pin Configuration
Pin #
Part Number
1
2
3
4
OSSRD1001A
OSSRD1002A
OSSRD1003A
OSSRD1004A
OSSRD1005A
OSSRD1006A
A
A
A
A
A
A
K
K
K
K
K
K
A1 (+)
A1 (+)
A1 (+)
A1 (+)
A1 (+)
A1 (+)
A2 (-)
A2 (-)
A2 (-)
A2 (-)
A2 (-)
A2 (-)
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.3
Page 2 of 15
11/09
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Solid State Relays
4-Pin SIP Package—VDC Input / VAC Output
OSSRD1001A thru OSSRD1006A
VDC Input / VAC Output Devices Ordering Information
Br. Vol.
Min. Tgr Max. Output Min. Ouput
Output
Type
Part Number
Input
Max. Vout Min. Vout
Configuration
Input to
Output
Current Ift
Current
Current
OSSRD1001A 5-12VDC
OSSRD1002A 5-12VDC
OSSRD1003A 5-12VDC
50mA
50mA
50mA
3A
5A
0.05A
0.05A
0.05A
250VAC
250VAC
250VAC
50VAC
50VAC
50VAC
AC
AC
AC
4000VAC BR —A1(+) A2(-)
4000VAC BR—A1(+) A2(-)
4000VAC BR —A1(+) A2(-)
10A
OSSRD1004A 5-12VDC
OSSRD1005A 5-12VDC
OSSRD1006A 5-12VDC
50mA
50mA
50mA
15A
25A
40A
0.05A
0.05A
0.05A
250VAC
250VAC
250VAC
50VAC
50VAC
50VAC
AC
AC
AC
4000VAC BR —A1(+) A2(-)
4000VAC BR —A1(+) A2(-)
4000VAC BR —A1(+) A2(-)
Configuration: Definition of Terms
LED Identification—Sensor Identification
Configuration
Information
BR - Bridge Rectifier
A1(+) and A2(-) = Main Terminals of Double Triac
LED
Sensor
Part Number Symbolization
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A.3 11/09
Page 3 of 15
Solid State Relays
4-Pin SIP Package—VDC Input / VAC Output
OSSRD1001A thru OSSRD1006A
Absolute Maximum Ratings (TA = 25o C unless otherwise noted)
Storage Temperature
OSSRD1001A thru OSSRD1006A
-30° C to +125° C
-30° C to +100° C
4,000 Vrms
Operating Temperature
OSSRD1001A thru OSSRD1006A
Isolation Voltage (Input to Output)
OSSRD1001A thru OSSRD1006A
Soldering Temperature 10 sec.
OSSRD1001A thru OSSRD1006A
260° C
Input Diode
Input Signal Voltage—(VIN)
OSSRD1001A thru OSSRD1006A
5– 12 VDC
1 VDC
Drop-out Voltage—(Vdo)
OSSRD1001A thru OSSRD1006A
Output Triac
RMS On-State Current - (IT)
OSSRA1001A
OSSRA1002A
3 Arms
5 Arms
OSSRA1003A
OSSRA1004A
OSSRA1005A
OSSRA1006A
10 Arms
15 Arms
25 Arms
40 Arms
Peak One Cycle Surge Current - (I surge)
OSSRA1001A
OSSRA1002A
30 A
50 A
OSSRA1003A
OSSRA1004A
OSSRA1005A
OSSRA1006A
100 A
150 A
250 A
400 A
Repetitive Peak-Off State Voltage—(VDRM
)
OSSRD1001A thru OSSRD1006A
600 V
47—70 Hz
50 A/µS
Operating Frequency—(f)
OSSRD1001A thru OSSRD1006A
Critical Rate of Rise of On-State Current—(di/dt)
OSSRD1001A thru OSSRD1006A
Load Supply Voltage—(VOUT
)
OSSRD1001A thru OSSRD1006A
250 Vrms AC
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.3
11/09
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Page 4 of 15
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Solid State Relays
4-Pin SIP Package—VDC Input / VAC Output
OSSRD1001A thru OSSRD1006A
Electrical Characteristics
SYMBOL
PARAMETER
MIN TYP MAX UNITS
TEST CONDITIONS
Input Diode
Pick-up Voltage
OSSRD1001A thru OSSRD1006A
VPU
-
-
-
4
VDC IT = 1Arms
mA VIN= 5 - 12 V
Input Current
OSSRD1001A thru OSSRD1006A
IIN
5
35
Output Triac
On-State Voltage
OSSRD1001A thru OSSRD1006A
VT
IOP
-
-
1.5
Vrms IT = 1Arms
Operating Current
OSSRD1001A thru OSSRD1006A
50
-
-
-
-
7
-
mArms Vout = 240Vrms
mArms Vout = 240Vrms
Leakage Current
OSSRD1001A thru OSSRD1006A
ILEAK
dv/dt
-
Critical Rate of Rise of Off-State Voltage
OSSRD1001A thru OSSRD1006A
50
200
V/µs
See Note 1.
Zero-Cross Voltage
OSSRD1001A thru OSSRD1006A
-
Yes
-
-
-
-
Load Voltage Rating
OSSRD1001A thru OSSRD1006A
VOUT
50
280
VAC
IT = 50mArms MIN
Minimum Trigger Current
IFT
OSSRD1001A, OSSRD1002A, OSSRD1003A
OSSRD1004A, OSSRD1005A, OSSRD1006A
-
-
-
-
10
25
mA
VDRM = 600 V
VDRM = 600 V
Isolation resistance Input to Output
OSSRD1001A thru OSSRD1006A
10^1
0
Riso
TON
-
-
-
DC500 V
60Hz AC
Ω
Turn-on Time
OSSRD1001A thru OSSRD1006A
-
8.3
mS
Turn-off Time
OSSRD1001A thru OSSRD1006A
TOFF
-
-
-
8.3
-
mS
60Hz AC
Rth (j-C) l Thermal Resistance (between junction and case)
1.3
°C/W
−
Note1: Output (dv/dt) protection is provided in all models, and they are designed to switch resistive or inductive loads to 0.2 factor. The dv/dt rating is based on
source impedance of 50 ohms.
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A.3 11/09
Page 5 of 15
Solid State Relays
4-Pin SIP Package—VDC Input / VAC Output
OSSRD1001A thru OSSRD1006A
OSSRD1001A
Characteristic Data Curves
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.3
11/09
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Page 6 of 15
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Solid State Relays
4-Pin SIP Package—VDC Input / VAC Output
OSSRD1001A thru OSSRD1006A
OSSRD1002A
Characteristic Data Curves
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Issue A.3 11/09
Page 7 of 15
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Solid State Relays
4-Pin SIP Package—VDC Input / VAC Output
OSSRD1001A thru OSSRD1006A
OSSRD1003A
Characteristic Data Curves
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.3
11/09
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Page 8 of 15
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Solid State Relays
4-Pin SIP Package—VDC Input / VAC Output
OSSRD1001A thru OSSRD1006A
OSSRD1004A
Characteristic Data Curves
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Issue A.3 11/09
Page 9 of 15
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Solid State Relays
4-Pin SIP Package—VDC Input / VAC Output
OSSRD1001A thru OSSRD1006A
OSSRD1005A
Characteristic Data Curves
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.3
11/09
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Page 10 of 15
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Solid State Relays
4-Pin SIP Package—VDC Input / VAC Output
OSSRD1001A thru OSSRD1006A
OSSRD1006A
Characteristic Data Curves
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Issue A.3 11/09
Page 11 of 15
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Solid State Relays
4-Pin SIP Package—VDC Input / VAC Output
OSSRD1001A thru OSSRD1006A
Quality and Reliability Requirements:
Parameter
Failure Criteria
Test Conditions
Room Temperature Operating Life
(for light emitting diodes only)
TA = 25°C, IF = 60mA or max. rated,
Time = 1000 hours
± 20%
JEDEC, Method A101-B
TA = 85°C, Humidity = 85%RH,
Time = 1000 hours
High Humidity, High Temperature
Reverse Bias
± 20%
± 20%
JEDEC, Method A108-A
TA = 70°C, IF = 20mA, Time = 1000 hours
High Temperature Forward Bias
TA = 121°C, Pressure = 15psi,
Humidity = 100%
Autoclave
0 Fail
0 Fail
JEDEC (J-STD-020) /
MIL-STD-883E, Method 2003.7
IR Reflow / Solderability Test
MTTF @ 90% confidence
Moisture Sensitivity Level
Glass Transition of body
Temperature Humidity-Bias
Temperature Cycle
150,000 Min.
MSL 1
@ 25°C, 25mADC
per JDEC stnd J-STD-020B
DSC test method
125°C Min.
± 20%
85°C, 85%RH, 500Hrs, 80% min Iceo
per Method 1010.7 of MIL-STD-883E
85°C, 500Hrs
± 20%
High Temperature Storage
± 20%
Label Identification:
Carrollton, TX, USA
MADE IN TAIWAN
DESCRIPTION:
OPTEK P/N __OSSRD1001A___
Size: 3” (7.4 cm) X 2.2” (5.5 cm)
Lettering shall be black on white background.
Format shall be as:
IIIIIIIIIIIIIIIIIIIII
QTY. ________—_________
Notes:
1. The DATE CODE is a 4-digit code for date of manufacture where YY
is the last two digits of the year, and WW is week number of
manufacture.
2. The LOT I.D. is the manufacturing location lot identification where Y is
the year of manufacture, NNNN is a sequential lot identifier, and DDD
is the day of the year of manufacture. – or use equivalent label
format.
IIIIIIIIIIIIIIIIIIIII
DATE CODE _____(YYWW)___
IIIIIIIIIIIIIIIIIIIII
LOT I.D. ____(Y-NNNNDDD)__
IIIIIIIIIIIIIIIIIIIII
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.3
Page 12 of 15
11/09
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Solid State Relays
4-Pin SIP Package—VDC Input / VAC Output
OSSRD1001A thru OSSRD1006A
Packaging Information:
Tube and Carton Packaging Specifications:
Tube Packaging Dimensions
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Issue A.3 11/09
Page 13 of 15
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Solid State Relays
4-Pin SIP Package—VDC Input / VAC Output
OSSRD1001A thru OSSRD1006A
Tray and Carton Packaging Specifications (Cont.):
Carton Packaging Dimensions
Inner Carton
All dimensions in millimeters
Medium Carton
All dimensions in millimeters
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.3
Page 14 of 15
11/09
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Solid State Relays
4-Pin SIP Package—VDC Input / VAC Output
OSSRD1001A thru OSSRD1006A
Tray and Carton Packaging Specifications (Cont.):
Carton Packaging Dimensions
Large Carton
All dimensions in millimeters
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A.3 11/09
Page 15 of 15
相关型号：
©2020 ICPDF网 联系我们和版权申明