RL0601DE-0548 [ULC]

AC-DC SWITCHING POWER SUPPLY;


型号：	RL0601DE-0548
厂家：	ULTRA LEVEL TECH CO., LTD.
描述：	AC-DC SWITCHING POWER SUPPLY 开关
文件：	总4页 (文件大小：394K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

ULTRA LEVEL TECH CO., LTD.

www.ultralevel.com.tw Tel:+886-2-29180118 Fax:+886-2-29181465

We Supply the Power Customers Need ISO9001

125W ~ 300W AC-DC SWITCHING POWER SUPPLY

RL0601D DUAL OUTPUT SERIES

FEATURES:

◆ Compact 300W with 1U height Power Density: 8.3 watts/cu in

◆ Low Leakage Current 500uA @ 240Vac / 300uA @ 120Vac

◆ 5/ 12/ 24/ 48V Dual Output Optional Combinations

◆ Power Factor Corrected to EN61000-3-2 class A

◆ Variable Fan Speed & Low Acoustical Noise

◆ High Quality & Reliable Component Usage

U Type: 6(L) x 4(W) x 1.5(H) inches.

◆ Approved to UL CUL TUV CB and CE

E Type: 7(L) x 4(W) x 1.6(H) inches.

◆ AC Input Range Auto-Selectable

◆ 4 - Mechanical Options

F Type: 6(L) x 4(W) x 2(H)inches.

C Type: 6(L) x 4(W) x 1.55(H) inches.

PRODUCT SPECIFICATIONS:

Input Voltage: 90-132 / 180-264Vac auto-ranging, 47~63Hz.

Input Current: 8/4A at 100-120/200-240Vac.

Operating Humidity: 5% to 90% RH, Non-condensing.

Vibration: 5 ~ 50 Hz, acceleration 7.35 m/s*s on X,Y and Z Axis.

EMC: EN55022 class B conducted / radiated, EN61000-3-2,

EN61000-3-3; EN55024 (IEC61000-4-2, IEC61000-4-3, IEC61000-

4-4, IEC61000-4-5, IEC61000-4-6, IEC61000-4-11).

Safety Regulation: UL60950-1, EN60950-1, IEC60950-1.

Leakage Current: < 1mA @ 264Vac.

(optional for 500uA max. at 240Vac / 300uA max. at 120Vac input)

HI-POT Test: 1500 VAC input line to chassis (10mA DC cut off

current); Isolating 3000VAC primary to secondary windings;

Primary to core 1500VAC. All for 3 sec.

Inrush Current: Max. 70A@230Vac & 35A@115Vac; cold start.

PFC: Power Factor Correction pass EN61000-3-2 class A.

Transient Response: Returns to within 1% in less than 2.5mS for a

50% load change and the peak transient does not excess 5%.

Overshoot: Turn-on & off overshoot < 5% over nominal voltage.

Efficiency: 75% ~ 85% depends on model.

Turn On Delay: 1 second maximum at 230 Vac.

Hold Up Time: 20mS min. at 80% of full load.

Adjustability: Output user adjustable +/-5% minimum.

Fan Drive: 12VDC/400mA offering to drive an external fan.

Fan Fail (FF) Alarm: Designated as FF on pin 3 of CN1, two types

of logical signal provided, contact manufacturer.

Grounding Test: Apply 25 A from ground pin of the three prong

plug to the far most earth. Max allowable resistance 0.1 ohm.

Warranty: 2 years.

Power Supply On: Green LED designated as LED1 on the PCB.

MTBF: 100000 Hrs (according to MIL-HBK-217F) at 30 ℃ .

Power Good: PG on CN1 goes high 100-500mS after DC regulation Cooling:

and low at least 1mS before loss of regulation (Open collector).

Input Fusing Protection: One T8A/250V fuse inserted in primary.

Over-Power Protection: 110~140% of I-Max; Auto-recovery.

Short Circuit Protection: Trip without damage and auto-recovery.

Over Voltage Protection: Unit latching down when output exceed

130% and recycle AC input to reset.

U Type: U-Chassis @300W max. with 18CFM airflow or 150W max.

convection cooling

C Type: U-Chassis with top cover @150W max. convection cooling

E Type: Enclosed with side built-in fan @300W max.

F Type: Enclosed with top built-in fan @300W max.

Burn in: 45 +/- 5 degree C for 1 hour @230Vac with full load.

Enclosure:

Over-Temperature Protection: Unit protected of excessive

operating ambient 110 ℃, and automatic recovery.

U Type: 6(L) x 4(W) x 1.5(H) inches.

Switching Frequency: 23K Hz fixed frequency.

C Type: 6(L) x 4(W) x 1.55(H) inches.

Operating Temperature: 0℃ to 70℃ ambient, de-rating at 2.5% per E Type: 7(L) x 4(W) x 1.6(H) inches.

degree from 50℃ to 70℃.

F Type: 6(L) x 4(W) x 2(H)inches.

Storage Temperature: -20 to 85 ℃.

Storage Humidity: 5% to 95% RH, Non-condensing.

Weight: Maximum weight is 800g.

ULTRA LEVEL TECH CO., LTD.

www.ultralevel.com.tw Tel:+886-2-29180118 Fax:+886-2-29181465

We Supply the Power Customers Need ISO9001

OUTPUT VOLTAGE / CURRENT RATING CHART: Measured at output power connector.

Model

Number

Output

Voltage

Max. Output Current

Regulation

Ripple &

Noise

Type U (force air)

Type U, C

& E & F

(Convection)

V1:+5V

30A

15A

10.42A

15A

+/- 5%

RL0601Dx-0512

RL0601Dx-0524

RL0601Dx-0548

RL0601Dx-1224

V2:+12V

V1:+5V

16.67A

30A

V2:+24V

V1:+5V

8.33A

30A

5.2A

15A

V2:+48V

V1:+12V

V2:+24V

4.16A

16.67A

8.33A

2.6A

12.5A

6.25A

Note:

* RL0601D series are designated as RL0601Dx-y where x can be U (U-Chassis), C (U-Chassis with top cover), E (Enclosed Type with side

built-in Fan) or F (Enclosed Type with side built-in Fan); y can be 0512, 0524, 0548, 1224.

* RL0601DU (with min. 18CFM forced air flow) & RL0601DE & RL0601DF Series:

Max. 300W total combined power of V1 and V2 for RL0601Dx-1224 and 250W for other models.

* RL0601DU and RL0601DC Series with convection cooling:

Max. 150W total combined power of V1 and V2 for RL0601Dx-1224 and 125W for other models.

* Ripple and noise is measured from 10KHZ to 20MHz bandwidth at output with parallel 0.1µF ceramic and 22µF electrolytic capacitors.

* 10% minimum load is required to maintain the ripple and regulation.

* Output is fully isolated.

OUTLINE DRAWING:

Input and Output Connector (CN2):

Terminal block - Howder Part No. HB-95-7P

Molex - Mating JST VH series. Input 5 pin connector (3 pin used, pin 2 & pin 4 removed),

PCB labeling: L = Line; N = Neutral; G = Chassis Ground. Output 10 pin connector.

Howder

Pin 1: V1

Molex

Pins 1 ~ 3: V1

Pins 4 ~ 8: RTN

Input and Output Connector Pin Assignment:

(See table in right).

Pin 2 ~ 3: RTN

Pin 4: V2

Mounting Inserts:

Pins 9 ~ 10: V2

Pin 11: GND

Pin 13: Neutral

Pin 15: Line

6 Places 8-32 (M4X0.7 Optional). Maximum Penetration 4mm sees outline drawing for

location.

Pin 5: GND

Pin 6: Neutral

Pin 7: Line

Logic signal connector (CN1):

Mating JST XHP-3 or equivalent (CHYAO SHIUNN JS-2001-03);

Mating Pins: JST SXH-002T-P0.6 FOR AWG 30 to 26.

Fan driver connector (FAN2):

Mating connector is JST P/N XHP-2 (2 pins 0.98 pitch) or equivalent (CHYAO SHIUNN

JS-2001-02).

ULTRA LEVEL TECH CO., LTD.

www.ultralevel.com.tw Tel:+886-2-29180118 Fax:+886-2-29181465

We Supply the Power Customers Need ISO9001

RL0601DU Series (U-Chassis Type): 6(L) x 4(W) x 1.5(H) inches; Weight: 600g.

FAN2

A 4:1 (6X)ZN-PLATED

RL0601DC Series (U-Chassis with Top Cover Type): 6(L) x 4(W) x 1.55(H) inches; Weight: 650g.

FAN2

A 4:1 (6X)ZN-PLATED

ULTRA LEVEL TECH CO., LTD.

www.ultralevel.com.tw Tel:+886-2-29180118 Fax:+886-2-29181465

We Supply the Power Customers Need ISO9001

RL0601DE Series (Enclosed with Side built-in Fan Type): 7(L) x 4(W) x 1.6(H) inches; Weight: 750g.

FAN2

A 4:1 (6X)ZN-PLATED

RL0601DF Series (Enclosed with Top built-in Fan Type): 6(L) x 4(W) x 2(H) inches; Weight: 800g.

FAN2

A 4:1 (6X)ZN-PLATED

相关型号：