NAS1715DT7NWX [UMPCO]

CLAMP, LOOP CUSHIONED;


型号：	NAS1715DT7NWX
厂家：	UMPCO
描述：	CLAMP, LOOP CUSHIONED
文件：	总2页 (文件大小：88K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

R .219 MIN FLAT

CLEARANCE

2X R .38

.50

2X Ǿ .204 IN LINE /17/

Ǿ D /1/

WEDGE WHEN SPECIFIED

/5/ /9/ /15/

STIFFENER RIBS

-4 AND ABOVE

90° TO 110°

T STOCK

VIEW H

STIFFENER BEAD

CENTERED /12/

STRAP

G /4/

CUSHION

JOGGLE TO

PROVIDE

2X .219

FLUSH SURFACE

/3/

SECTION A-A

TABLE 1

MATERIAL

AL ALY CRES

DASH NO.

D DIA ±.015

2 THRU 20

2 THRU 10

11 THRU 20

21 THRU 32

33 THRU 66

±.015

.062

.125

STOCK

0.020

0.032

0.051

0.064

D/2 +.390

D/2 + .402

D/2 + .490

D/2 + .534

+.015

.062

.094

-.000

+.031

-.000

MATERIAL:

STRAP

ALUMINUM ALLOY - 2024 (UNS A82024), ALCLAD PER AMSQQ-A-250/5 CONDITION T4 AND T42.

CRES - 304 (UNS S30400) PER AMS 5513, OR 321 (UNS 32100) PER AMS 5510, OR.302 (UNS S30200)

PER AMS 5516.

CHLOROPRENE RUBBER (CR) PER AMS3209.

SILICONE RUBBER PER AMS3303.

CUSHION

POLYTETRAFLUOROETHYLENE (PTFE) PER AMS3660 OR AMS3652

FABRIC POLYBENZIMIDAZOLE (PBI) FIBERGLASS POLYTETRAFLUOROETHYLENE (PTFE) IMPREGNATED

PER NAS3677

FINISH:

CRES

ALUMINUM

PTFE

PASSIVATE PER AMS2700, METHOD 1, TYPE 6 OR 7, CLASS 4.

NONE

SODIUM TREATED (DECREASED SLIPPAGE CHARACTERISTICS)

NONE (NATURAL)

PTFE

THIS CATALOG PAGE IS FOR REFERENCE ONLY. REQUEST

REV

07/26/11

UMPCO, INC

CAGE CODE No. 18076

CERTIFIED UMPCO DRAWING FOR ACTUAL SPECIFICATIONS.

ANY CONFLICT BETWEEN THIS DOCUMENT AND THE CERTIFIED

DRAWING, THE CERTIFIED DRAWING WILL TAKE PRECEDENCE.

IF THE DOCUMENT IS CONTROLLED BY ANY OTHER SOURCE

THAN UMPCO, THE CERTIFIED DRAWING MUST BE PURCHASED

THROUGH THAT ORGANIZATION.

NAS1715

PART NUMBER

CLAMP, LOOP CUSHIONED

7100 LAMPSON AVE * PO BOX 5158 * GARDEN GROVE, CA 92846-5158 SALES: (714) 897-3531 * BUS: (714) 897-3536 * FAX: (714) 897-2611

EXAMPLE OF PART NUMBER:

NAS1715

= CLAMP, LOOP, CENTER, MOUNTED, .032 ALUMINUM

ALLOY, .438 DIA, PTFE CUSHION, SODIUM TREATED,

WEDGE TYPE, .265 DIA MOUNTING HOLE

MOUNTING HOLE DIA:

H= .265

X = .213 TO .223

OMIT CODE = .204

WEDGE CODE:

W = WEDGE

OMIT CODE = NO WEDGE

CUSHION:

K = PTFE, NATURAL

N = CHLOROPRENE RUBBER

S = SILICONE RUBBER

T = PTFE, SODIUM TREATED

Z = FABRIC, PBI/PTFE IMPREGNATED

DASH NUMBER, D DIAMETER IN .0625 INCREMENTS

MATERIAL:

D = ALUMINUM ALLOY AND THICKNESS PER TABLE 1

DT = ALUMINUM ALLOY AND THICKNESS PER TABLE 1

C = CRES AND THICKNESS PER TABLE 1

CT = CRES AND THICKNESS PER TABLE 1

DOCUMENT NUMBER

NOTES:

/1/

STANDARD SIZE LIMITATIONS:

.125 THRU 1.500 BY .0625 INCREMENTS

1.625 THRU 2.500 BY .125 INCREMENTS

2.750 AND ABOVE BY .250 INCREMENTS

TEMPERATURE RANGE:

CUSHION:

CHLOROPRENE RUBBER

SILICONE RUBBER

-40°F TO +212°F

-80°F TO +450°F (SHORT DURATION EXCURSIONS TO 500°F)

PTFE

FABRIC

-320°F TO +500°F

+554°F

STRAP:

ALUMINUM

CRES

-320 °F TO +200 °F

-320 °F TO +600 °F

/3/

CUSHION THICKNESS:

ALL SIZES FABRIC .062

SIZES THRU –8, RUBBER .045

SIZES –9 THRU –66, RUBBER, .062

PTFE, CODE “K” & “T” (NON-WEDGE) .020 +.008/-.004

PTFE, CODE “KW” & “TW” (WEDGE TYPE) .030 +.011/-.005

/4/

/5/

CLAMP SHALL CHECK TO DIMENSIONS WITH ENDS HELD IN POSITION SHOWN BY DIMENSION G.

WEDGE MAY BE INTEGRALLY MOLDED TO CUSHION OR VULCANIZED TO CUSHION.

METAL STRAP SHALL BE FREE OF BURRS AND SHARP EDGES.

COMPLETE NAS PART NUMBER, AND MANUFACTURER’S IDENTIFICATION SHALL BE MARKED ON EACH CLAMP IN AN AREA NOT

COVERED BY CUSHION OR MOUNTING HARDWARE EXCEPT SIZES –2, -3, AND –4, WHICH SIZES SHALL BE IDENTIFIED BY

STRAP MATERIAL, DASH NUMBER, CUSHION MATERIAL AND MANUFACTURER’S IDENTIFICATION, E.G. D2T XX

DIMENSIONS IN INCHES.

/9/

10.

WEDGE NOT AVAILABLE ON PTFE CUSHION CLAMP, CODE “K” AND “T” ON SIZES 2 THRU 5.

DELETED

11.

DELETED

/12/

13.

STIFFENER BEAD CONSTRUCTION ON CLAMP SIZES 5 AND ABOVE

DELETED

/14/

CUSHION TYPES “A” AND “M” ARE INACTIVE FOR DESIGN AFTER MARCH 31, 1994. SUPERSEDED BY TYPE “Z”. FOR

DESCRIPTION OF STATUS NOTES SEE NAS380.

/15/

16.

WEDGE NOT AVAILABLE ON FABRIC CUSHIONED CLAMP, CODE “Z”.

DIMENSIONING AND TOLERANCES PER ANSI Y14.5M-1982.

/17/

18.

.265 DIAMETER OR .213 TO .223 DIAMETER OPTION AVAILABLE WHEN SPECIFIED BY PART NUMBER.

TOLERANCES UNLESS OTHERWISE SPECIFIED: 2 PLACES ±.03, 3 PLACES ±.010.

THIS CATALOG PAGE IS FOR REFERENCE ONLY. REQUEST

REV

07/26/11

UMPCO, INC

CAGE CODE No. 18076

CERTIFIED UMPCO DRAWING FOR ACTUAL SPECIFICATIONS.

ANY CONFLICT BETWEEN THIS DOCUMENT AND THE CERTIFIED

DRAWING, THE CERTIFIED DRAWING WILL TAKE PRECEDENCE.

IF THE DOCUMENT IS CONTROLLED BY ANY OTHER SOURCE

THAN UMPCO, THE CERTIFIED DRAWING MUST BE PURCHASED

THROUGH THAT ORGANIZATION.

NAS1715

PART NUMBER

CLAMP, LOOP CUSHIONED

7100 LAMPSON AVE * PO BOX 5158 * GARDEN GROVE, CA 92846-5158 SALES: (714) 897-3531 * BUS: (714) 897-3536 * FAX: (714) 897-2611

相关型号：