6KP40CA [UNSEMI]
Surface Mount Transient Voltage Suppressors;
| 型号： | 6KP40CA |
| 厂家： | 
UN Semiconducctor INC |
| 描述： | Surface Mount Transient Voltage Suppressors |
| 文件： | 总4页 (文件大小：1040K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Surface Mount Transient Voltage Suppressors
The 6KP series of high current uni/bi-directional transient
suppressors are designed for A.C. line protection and high power
DC bus clamping applications. These devices offer
uni/bi-directional port protection from 15 volts to 43 volts. They
provide a clamping voltage lower than the avalanche voltage.
Therefore, any voltage rise due to increased current conduction
is contained to a minimum, providing the best possible protection
level. They can also be connected in series and/or parallel to
create very high capacity protection solutions.
JEDEC R-6/P-600 Molded Plastic.
Glass passivated chip junction in R-6/P600 package.
6600 W peak pulse power capability with a 10/1000 us
waveform, repetitive rate (duty cycle):0.01 %
Low leakage
Excellent clamping capability
Very fast response time: typically less than 1.0ps from 0V to
VBR min.
RoHS compliant
Use in sensitive electronics protection against voltage transients
induced by inductive load switching and lighting, especially for
automotive load dump protection application
Parameter
Symbol
PPPM
Value
Units
Peak power dissipation with a 10/1000us waveform
6600
W
Power Dissipation on Infinite Heat Sink at TL=75°C
Peak pulse current with a 10/1000us waveform
PD
I PP
8.0
W
A
See Next Table
T J , T STG
Operating junction and storage temperature range
–55 to +150
°C
IFSM
Peak forward surge current, 8.3ms single half sine-wave
500
A
@ UN Semiconductor Co., Ltd. 2018
Specifications are subject to change without notice.
Revision April 24, 2018
1
4
/
Please refer to www.unsemi.com.tw for current information.
Surface Mount Transient Voltage Suppressors
Breakdown
Voltage
Maximum
Reverse
Leakage I R
@V RWM
Maximum
Reverse
Surge
Current I PP
(A)
Stand-Off
Voltage
VRMW
Test
Current
IT
Maximum
Clamping
Voltage
Part Number
VBR
(1)
(mA)
V
C @I PP (V)
(V)
Uni
Bi
min(V)
max(V)
(uA)
6KP15A
6KP16A
6KP15CA
6KP16CA
15.0
16.0
16.70
17.80
18.50
19.70
5.0
5.0
5
5
270.5
253.8
24.4
26.0
6KP18A
6KP20A
6KP22A
6KP24A
6KP26A
6KP28A
6KP30A
6KP33A
6KP36A
6KP40A
6KP43A
6KP18CA
6KP20CA
6KP22CA
6KP24CA
6KP26CA
6KP28CA
6KP30CA
6KP33CA
6KP36CA
6KP40CA
6KP43CA
18.0
20.0
22.0
24.0
26.0
28.0
30.0
33.0
36.0
40.0
43.0
20.00
22.20
24.40
26.70
28.90
31.10
33.30
36.70
40.00
22.10
24.50
26.90
29.50
31.90
34.40
36.80
40.60
44.20
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5
5
5
5
5
5
5
5
5
5
5
226.0
203.7
186.0
169.6
156.8
145.4
136.3
123.8
113.6
102.3
95.1
29.2
32.4
35.5
38.9
42.1
45.4
48.4
53.3
58.1
64.5
69.4
44.40
47.80
49.10
52.80
Note:(1)Surge waveform: 10/1000μs
@ UN Semiconductor Co., Ltd. 2018
Specifications are subject to change without notice.
Revision April 24, 2018
2
4
/
Please refer to www.unsemi.com.tw for current information.
Surface Mount Transient Voltage Suppressors
试验脉冲 5a
TEST
NUMBER OF
PULSE
SYSTEM
Us(V)
Td（ms） Ri（Ω ）
LEVEL
Ⅳ
12V
24V
87
174
400
350
0.5
4
10 pulse
10 pulse
Ⅳ
Soldering Parameters
Reflow Condition
Lead–free assembly
TP
Critical Zone
TL to TP
-Temperature Min (Ts(min)
)
-Temperature Max (Ts(max)
- Time (min to max) (ts)
150°C
Ramp-up
TL
Pre Heat
)
200°C
TS(max)
60 -180 Seconds
Ramp-down
Average ramp up rate ( Liquidus Temp TL)
to peak
3°C/second max
TS(min)
TS(max) to TL - Ramp-up Rate
3°C/second max
217°C
Preheat
- Temperature (TL) (Liquidus)
Reflow
25
Time to peak temperature
- Time (min to max) (ts)
Time
60 -150 Seconds
260 +0/-5°C
(t 25℃ to peak)
Peak Temperature (TP)
Time within 5°C of actual peak
Temperature (tp)
20 -40 Seconds
Ramp-down Rate
6°C/second max
8 minutes Max
260°C
Time 25°C to peak Temperature (TP)
Do not exceed
@ UN Semiconductor Co., Ltd. 2018
Specifications are subject to change without notice.
Revision April 24, 2018
3
4
/
Please refer to www.unsemi.com.tw for current information.
Surface Mount Transient Voltage Suppressors
Dimensions
Inches
Millimeters
R6/P600
Dimensions
Min
Max
-
Min
Max
-
Cathode Band
A
B
C
D
1.000
0.340
0.048
0.340
25.40
8.64
1.22
8.64
0.360
0.052
0.360
9.14
1.32
9.14
Part Numbering
6 K P × × × C A
5% VBR VOLTAGE TOLERANCE
BI-DIRECTIONAL
VR VOLTAGE
SERIES
Packaging
Component
Package
Packaging
Option
Part Number
Quantity
250
R6/P600
6KPXXXXX
Box
@ UN Semiconductor Co., Ltd. 2018
Specifications are subject to change without notice.
Revision April 24, 2018
4
4
/
Please refer to www.unsemi.com.tw for current information.
相关型号：
©2020 ICPDF网 联系我们和版权申明