UN1206-350ASMD [UNSEMI]
Surface Mount 2-Electrode Gas Discharge Tube (GDT);型号: | UN1206-350ASMD |
厂家: | UN Semiconducctor INC |
描述: | Surface Mount 2-Electrode Gas Discharge Tube (GDT) |
文件: | 总4页 (文件大小:539K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Surface Mount 2-Electrode Gas Discharge Tube (GDT)
UN1206 Series
Description
Gas discharge Tubes (GDT) are classical components for
protecting the installations of the telecommunications. It is
essential that IT and telecommunications systems -with their
high-grade but sensitive electronic circuits - be protected by
arresters.
The 1206 series GDT offers high surge ratings in a miniature
package. It’s designed for surface mounting on PCB with small size
3.2x1.6x1.6mm. Low insertion loss is perfectly suited to broadband
equipment applications. The capacitance does not vary with
voltage, and will not cause operational problems with ADSL2+,
Schematic Symbol
where capacitance variation across Tip and Ring is undesirable.
These devices are extremely robust and are able to divert a 500A
pulse in a miniature package 1206 without destruction.
Agency Approvals
AGENCY
Features
u
Non-Radioactive
AGENCY FILE NUMBER
u
u
u
u
u
RoHS compliant
Ultra low capacitance (<0.5pF)
UL recognized
E341061
Excellent response to fast rising transients
0.5KA surge capability tested with 8/20μs
pulse as defined by IEC 61000-4-5
Square Outline
Product Characteristics
Materials
Dull Tin-plated
u
Product Marking
Without
Storage and
Operational
Temperature
Applications
-40 to +90°C
~30mg
u
u
u
u
u
u
u
u
u
u
u
u
Communication equipment
CATV equipment
Test equipment
Data lines
Power supplies
Telecom SLIC protection
Broadband equipment
ADSL equipment, including ADSL2+
XDSL equipment
Satellite and CATV equipment
General telecom equipment
ESD protection
Weight
UN Semiconductor Co., Ltd.
www.unsemi.com.tw
@ UN Semiconductor Co., Ltd. 2013
Revision October 18, 2013
1 / 4
Specifications are subject to change without notice.
Please refer to www.unsemi.com.tw for current information.
Surface Mount 2-Electrode Gas Discharge Tube (GDT)
UN1206 Series
Device Dimensions
(Unit: mm)
Recommended pad outline
Electrical Characteristics
Nominal
DC
Spark-over
Voltage
Impulse
Discharge
Voltage
Maximum Impulse
Spark-over Voltage
Maximum
Capacitance
Arc
Voltage
Impulse
Discharge
Current
Minimum
Insulation
Resistance
Part Number
@8/20μs
±5 times
@100V/S
@100V/μs
@1KV/μs
@1MHz
@1A
@10/700μs
1 GΩ
(at 50V DC)
UN1206-150ASMD
UN1206-200ASMD
UN1206-230ASMD
UN1206-300ASMD
UN1206-350ASMD
UN1206-400ASMD
UN1206-420ASMD
150V±30%
200V±30%
230V±30%
300V±30%
350V±30%
400V±30%
420V±30%
470V±30%
600V
600V
700V
750V
800V
950V
950V
1100V
700V
750V
0.5pF
0.5pF
0.5pF
0.5pF
0.5pF
0.5pF
0.5pF
0.5pF
~15V
~15V
~15V
~15V
~15V
~15V
~15V
~15V
0.5KA
0.5KA
0.5KA
0.5KA
0.5KA
0.5KA
0.5KA
0.5KA
4KV
4KV
4KV
4KV
4KV
4KV
4KV
4KV
1 GΩ
(at 100V DC)
1 GΩ
(at 100V DC)
800V
1 GΩ
(at 100V DC)
850V
1 GΩ
(at 100V DC)
900V
1 GΩ
(at 100V DC)
1050V
1050V
1200V
1 GΩ
(at 100V DC)
1 GΩ
(at 100V DC)
UN1206-470ASMD
Notes:
1). Terms in accordance with ITU-T K.12 and GB/T 9043-2008
2). At delivery AQL 0.65 level Ⅱ, DIN ISO 2859
UN Semiconductor Co., Ltd.
www.unsemi.com.tw
@ UN Semiconductor Co., Ltd. 2013
Revision October 18, 2013
2 / 4
Specifications are subject to change without notice.
Please refer to www.unsemi.com.tw for current information.
Surface Mount 2-Electrode Gas Discharge Tube (GDT)
UN1206 Series
Electrical Rating
Item
Test Condition / Description
Requirement
DC Spark-over Voltage
The voltage is measured with a slowly rate of rise dv / dt=100V/s
Impulse Spark-over
Voltage
The maximum impulse spark-over voltage is measured with a rise time of
dv / dt=100V//μs or 1KV/μs
The resistance of gas tube shall be measured each terminal each other terminal,
please see above spec.
Insulation Resistance
Capacitance
The capacitance of gas tube shall be measured each terminal to each other
terminal.
Test frequency :1MHz
The maximum current applying a waveform of 8/20μs that can be applied across
the terminals of the gas tube. One hour after the test is completed, re-testing of the
DC spark-over voltage does not exceed ±40% of the nominal DC spark-over
voltage. Dwell time between pulses is 3 minutes.
To meet
the specified
value
Nominal Impulse
Discharge Current
Recommended soldering profile
Reflow Condition
Pb - Free assembly
150°C
-Temperature Min (Ts(min)
)
-Temperature Max (Ts(max)
- Time (min to max) (ts)
TP
Pre Heat
)
200°C
Critical Zone
TL to TP
Ramp-up
60 -180 Seconds
TL
TS(max)
Average ramp up rate ( Liquidus Temp TL)
to peak
3°C/second max
Ramp-down
TS(max) to TL - Ramp-up Rate
5°C/second max
217°C
TS(min)
- Temperature (TL) (Liquidus)
Reflow
Preheat
- Time (min to max) (ts)
60 -150 Seconds
260 +0/-5°C
Peak Temperature (TP)
25
Time to peak temperature
Time
(t 25℃ to peak)
Time within 5°C of actual peak
Temperature (tp)
10 - 30 Seconds
Ramp-down Rate
6°C/second max
8 minutes Max
260°C
Time 25°C to peak Temperature (TP)
Do not exceed
UN Semiconductor Co., Ltd.
www.unsemi.com.tw
@ UN Semiconductor Co., Ltd. 2013
Specifications are subject to change without notice.
Please refer to www.unsemi.com.tw for current information.
Revision October 18, 2013
3 / 4
Surface Mount 2-Electrode Gas Discharge Tube (GDT)
UN1206 Series
Part Numbering
U N 1 2 0 6 – X X X A S M D
SMD, Surface Mount
8/20μs Level
A, 0.5KA
Nominal DC Spark-over Voltage
150 = 150V
200 = 200V
350 = 350V
400 = 400V
Series
Tape and Reel Dimensions
Unit: mm
Packaging
Part Number
Description
Quantity
UN1206-XXXASMD
12mm Tape & 7″ Reel
2500
Cautions and warnings
u
u
u
Gas discharge tubes (GDT) must not be operated directly in power supply networks.
Gas discharge tubes (GDT) may become hot in case of longer periods of current stress (danger of burning).
Gas discharge tubes (GDT) may be used only within their specified values. In the event of overload, the head contacts may
fail or the component may be destroyed.
u
Damaged Gas discharge tubes (GDT) must not be re-used.
UN Semiconductor Co., Ltd.
www.unsemi.com.tw
@ UN Semiconductor Co., Ltd. 2013
Specifications are subject to change without notice.
Please refer to www.unsemi.com.tw for current information.
Revision October 18, 2013
4 / 4
相关型号:
©2020 ICPDF网 联系我们和版权申明