BTB25 [UTC]
25A TRIACS;型号: | BTB25 |
厂家: | Unisonic Technologies |
描述: | 25A TRIACS 三端双向交流开关 |
文件: | 总3页 (文件大小:175K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
UNISONIC TECHNOLOGIES CO., LTD
BTB25
Preliminary
TRIAC
25A TRIACS
DESCRIPTION
The UTC BTB25 is a 25A triacs which can be operated in 4
quadrants, it uses UTC’s advanced technology to provide
customers with high commutation performances.
The UTC BTB25 is suitable for AC switching application and
phase control application such as fan speed and temperature
modulation control, lighting control and static switching relay, either
in through-hole or surface-mount packages.
SYMBOL
MT2
G
MT1
ORDERING INFORMATION
Ordering Number
Pin Assignment
Package
TO-220
Packing
Tube
Lead Free
Halogen Free
BTB25G-x-x-TA3-T
1
2
3
BTB25L-x-x-TA3-T
MT1 MT2
G
Note: Pin Assignment: G: Gate
SENSITIVITY AND TYPE
VOLTAGE
PART NUMBER
B
SENSITIVITY
50mA
TYPE
STANDARD
600V
◎
800V
◎
◎: Available
MARKING
www.unisonic.com.tw
1 of 3
Copyright © 2015 Unisonic Technologies Co., Ltd
QW-R220-026.a
BTB25
Preliminary
TRIAC
ABSOLUTE MAXIMUM RATINGS
PARAMETER
SYMBOL
IT(RMS)
RATINGS
25
UNIT
A
RMS On-State Current (Full Sine Wave) TC=75°C
Non Repetitive Surge Peak
On-State Current (Full
F=50 Hz t=20ms
250
A
ITSM
I2t
F=60 Hz t=16.7ms
tP=10ms
260
340
A
A2s
Cycle, TJ initial=25°C)
I2t Value for Fusing
Critical Rate of Rise of
On-State Current IG=2xIGT
tr≤100ns
,
F=120 Hz TJ=125°C
dI/dt
50
A/µs
Non Repetitive Surge Peak
Off-State Voltage
tP=10ms TJ=25°C
VDSM/VRSM
VDRM/VRRM+100
V
Peak Gate Current
tP=20µs
TJ=125°C
TJ=125°C
IGM
PG(AV)
TJ
4
A
Average Gate Power Dissipation
Operating Junction Temperature
Storage Junction Temperature
1
W
°C
°C
-40~+125
-40~+150
TSTG
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
THERMAL RESISTANCES
PARAMETER
SYMBOL
θJA
RATINGS
UNIT
°C/W
°C/W
Junction to Ambient
60
Junction to Case (AC)
θJC
0.8
ELECTRICAL CHARACTERISTICS (TJ =25°C unless otherwise specified)
FOR STANDARD TYPE (4 QUADRANTS)
B
PARAMETER
SYMBOL
IGT
TEST CONDITIONS
UNIT
mA
MIN TYP MAX
50
I-II-III
IV
Gate Trigger Current (Note 1)
VD=12V, RL=33Ω
100 mA
Gate Trigger Voltage
VGT
VGD
IH
ALL
1.3
V
V
Gate Non-Trigger Voltage
Holding Current Note 2)
VD=VDRM, RL=3.3kΩ, TJ=125°C ALL
0.2
IT=500mA
80
70
mA
mA
I-III-IV
II
Latching Current
IL
IG=1.2 IGT
160 mA
Critical Rate of Rise of Off-State
Voltage (Note 2)
dV/dt
VD=67%VDRM, Gate Open, TJ=125°C
500
10
V/µs
Critical Rate of Rise of Off-State
Voltage at Commutation(Note 2)
(dV/dt)c (dI/dt)c=13.3A/ms, TJ= 125°C
V/µs
STATIC CHARACTERISTICS
PARAMETER
SYMBOL
VTM
TEST CONDITIONS
ITM=35A, tP=380μs
MIN TYP MAX UNIT
Peak On-State Voltage (Note 2)
Threshold Voltage (Note 2)
Dynamic Resistance (Note 2)
Repetitive Peak Off-State
Current
TJ=25°C
TJ=125°C
TJ=125°C
TJ=25°C
TJ=125°C
1.55
0.85
16
V
V
VTO
RD
mꢀ
μA
mA
IDRM
5
VDRM=VRRM
IRRM
3
Notes: 1. Minimum IGT is guaranteed at 5% of IGT max.
2. For both polarities of MT2 referenced to MT1.
UNISONIC TECHNOLOGIES CO., LTD
2 of 3
QW-R220-026.a
www.unisonic.com.tw
BTB25
Preliminary
TRIAC
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
3 of 3
QW-R220-026.a
www.unisonic.com.tw
相关型号:
©2020 ICPDF网 联系我们和版权申明