LB1183AG-15-AF5-R [UTC]

300mA CMOS LDO;
LB1183AG-15-AF5-R
型号: LB1183AG-15-AF5-R
厂家: Unisonic Technologies    Unisonic Technologies
描述:

300mA CMOS LDO

文件: 总6页 (文件大小:155K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
UNISONIC TECHNOLOGIES CO., LTD  
L1183A  
CMOS IC  
300mA CMOS LDO  
DESCRIPTION  
The UTC L1183A is a COMS positive linear regulator. One of it’s  
feature is the very low quiescent current typical as low as 30μA and  
its dropout voltage is extremely low with 300mA output current.  
The internal circuit includes current fold-back to prevent device  
failure when the circuit is operated in the bad conditions.  
In application, the UTC L1183A needs a low noise, regulated  
supply. For stable operation, the output capacitance value should be  
2.2μF or more.  
The UTC L1183A is an ideal for battery applications, such as  
instrumentations, portable electronics, wireless devices, cordless  
phones, PC peripherals, and battery powered widgets.  
FEATURES  
* Accurate To Within 1.5%  
* Quiescent Current: 30μA  
* With Current Limiting  
* Internal Short Circuit Current Fold-Back  
* Has Power-Saving Shutdown Mode  
* Very Low Temperature Coefficient  
ORDERING INFORMATION  
Ordering Number  
L1183AG-xx-AF5-R  
L1183AG-xx-AG6-R  
Package  
SOT-25  
SOT-26  
Packing  
Tape Reel  
Tape Reel  
Note: xx: Output Voltage, refer to Marking Information.  
L1183AG-xx-AF5-R  
(1) Packing Type  
(1) R: Tape Reel  
(2) AF5: SOT-25, AG6: SOT-26  
(2) Package Type  
(3) xx: Refer to Marking Information  
(4) G: Halogen Free and Lead Free  
(3) Output Voltage Code  
(4) Green Package  
www.unisonic.com.tw  
1 of 6  
Copyright © 2014 Unisonic Technologies Co., Ltd  
QW-R502-315.M  
L1183A  
CMOS IC  
MARKING INFORMATION  
PACKAGE  
VOLTAGE CODE  
MARKING  
4
5
12:1.2V  
15 :1.5V  
18:1.8V  
25:2.5V  
28 :2.8V  
30: 3.0V  
31 :3.1V  
33 :3.3V  
50:5.0V  
SXXAG  
SOT-25  
Voltage Code  
1
2
3
6
5
4
SXXAG  
SOT-26  
Voltage Code  
1
2
3
PIN CONFIGURATION  
PIN DESCRIPTION  
PACKAGE  
PIN NO.  
PIN NAME  
DESCRIPTION  
Input for voltage input. A 1µF or greater capacitor should be placed in  
this pin.  
1
2
3
4
VIN  
GND  
EN  
Ground.  
Enable pin. Pulling his pin low, can shut down the PMOS pass transistor,  
and the current consuming can be set less than 1µA.  
SOT-25  
NC  
Output voltage pin. The capacitor which connected between this pin and  
5
VOUT  
GND should be decoupled with a 2.2µF or a greater value low ESR  
ceramic capacitor.  
Remote Sense.  
1
2
3
4
5
6
SENSE  
GND  
BYP  
EN  
Ground.  
Bypass capacitor for noise reduction.  
Enable Input.  
SOT-26  
VDD  
Supply Input.  
VOUT  
Output Voltage.  
UNISONIC TECHNOLOGIES CO., LTD  
2 of 6  
QW-R502-315.M  
www.unisonic.com.tw  
L1183A  
CMOS IC  
BLOCK DIAGRAM  
VIN  
Overcurrent Shutdown  
EN  
-
NC  
AMP  
+
VOUT  
R1  
R2  
VREF=1.215V  
GND  
UNISONIC TECHNOLOGIES CO., LTD  
3 of 6  
QW-R502-315.M  
www.unisonic.com.tw  
L1183A  
CMOS IC  
ABSOLUTE MAXIMUM RATING (Unless otherwise specified)  
PARAMETER  
SYMBOL  
VIN  
RATINGS  
-0.3~ +6.5  
-0.3~ +6.5  
-0.3~ VIN+0.3  
300  
UNIT  
V
Input Voltage  
Input Voltage (EN,BYP)  
Output Voltage  
V
VOUT  
IOUT  
PD  
V
Output Current  
mA  
mW  
Power Dissipation  
400  
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.  
Absolute maximum ratings are stress ratings only and functional device operation is not implied.  
RECOMMENDED OPERATING CONDITIONS  
PARAMETER  
SYMBOL  
TA  
RATINGS  
- 40 ~ +85  
150  
UNIT  
°C  
Ambient Temperature  
Junction Temperature  
Storage Temperature  
TJ  
°C  
TSTG  
-65 ~ +150  
°C  
THERMAL DATA  
PARAMETER  
SYMBOL  
θJA  
RATINGS  
280  
UNIT  
°C/W  
°C/W  
Junction to Ambient  
Junction to Case (Note)  
θJC  
140  
Note: θJC on center of molding compound if IC has on tab.  
UNISONIC TECHNOLOGIES CO., LTD  
4 of 6  
QW-R502-315.M  
www.unisonic.com.tw  
L1183A  
CMOS IC  
ELECTRICAL CHARACTERISTICS (TA = 25°C, Unless otherwise specified)  
PARAMETER  
SYMBOL  
VIN  
TEST CONDITIONS  
MIN TYP MAX UNIT  
Input Voltage  
Note1  
-0.2  
6.5  
0.2  
V
1.2VVOUT1.4V  
%
%
%
VIN=VOUT+1~VOUT+2  
OUT=1mA  
1.4V<VOUT2.0V  
-0.15  
0.15  
0.1  
VOUT  
I
Line Regulation  
2.0V<VOUT<4.0V  
-0.1 0.02  
VOUT  
VIN=VOUT+1~VOUT+1.5V  
VOUT=5.0V  
-0.1 0.02  
0.1  
2
%
%
I
OUT=1mA  
VOUT  
Load Regulation  
I
OUT=1mA~300mA  
-2  
0.2  
30  
VOUT  
I
OUT=1mA  
-1.5  
-2.5  
1.5  
2.5  
%
%
Output Voltage Accuracy  
Quiescent Current  
IOUT=300mA  
IOUT=0mA  
IQ  
50  
µA  
1.2VVO(NOM)2.0V  
2.4V<VO(NOM)2.8V  
2.8V<VO(NOM)5.0V  
f=100Hz  
1300  
400  
300  
I
V
OUT=300mA  
OUT=VO(NOM)-2.0%  
Dropout Voltage  
VD  
mV  
60  
50  
20  
30  
dB  
dB  
I
C
OUT=100mA  
OUT=2.2µF  
Power Supply Ripple Rejection PSRR  
f=1kHz  
f=10kHz  
dB  
Output Voltage Noise  
Output Current  
eN  
IOUT  
ILIMIT  
ISC  
IOUT=10mA,COUT=2.2µF,f=10Hz~100kHz  
VOUT>1.2V  
µVRMS  
mA  
mA  
mA  
µA  
300  
300  
Current Limit  
VOUT>1.2V  
450  
150  
35  
Short Circuit Current (Note2)  
Ground Pin Current  
Temperature Coefficient of  
Output Voltage  
VOUT<0.8V  
300  
IGND  
IOUT=1mA ~300mA  
TCVO  
30  
ppm/°C  
VEH  
VEL  
IEH  
VIN=2.7V~6.5V  
2.0  
0
VIN  
0.4  
2.0  
0.5  
1
V
V
EN Input Threshold  
VIN=2.7V~6.5V  
VEN=VIN, VIN=2.7V~6.5V  
VEN=0V, VIN=2.7V~6.5V  
VIN=6.5V, VO=0V, VEN<VEL  
IO=0.4mA, VEN<VEL  
µA  
µA  
µA  
V
EN Input Bias Current  
IEL  
Shutdown Supply Current  
Shutdown Output Voltage  
Notes:1. VIN(MIN) =VOUT +VD  
ISD  
0.5  
VSD  
0
0.4  
2. To prevent the short circuit current protection feature from being prematurely activated, the input voltage  
must be applied before a current source load is applied.  
Notes: 1. VIN(MIN) =VOUT +VD.  
2. To prevent the short circuit current protection feature from being prematurely activated, the input voltage  
must be applied before a current source load is applied.  
UNISONIC TECHNOLOGIES CO., LTD  
5 of 6  
QW-R502-315.M  
www.unisonic.com.tw  
L1183A  
CMOS IC  
TYPICAL APPLICATION CIRCUIT  
L1183A  
GND  
VOUT  
EN  
INPUT  
OUTPUT  
VIN  
NC  
C2  
2.2µF  
C1  
1µF  
UTC assumes no responsibility for equipment failures that result from using products at values that  
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or  
other parameters) listed in products specifications of any and all UTC products described or contained  
herein. UTC products are not designed for use in life support appliances, devices or systems where  
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in  
whole or in part is prohibited without the prior written consent of the copyright owner. The information  
presented in this document does not form part of any quotation or contract, is believed to be accurate  
and reliable and may be changed without notice.  
UNISONIC TECHNOLOGIES CO., LTD  
6 of 6  
QW-R502-315.M  
www.unisonic.com.tw  

相关型号:

SI9130DB

5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY