MBR2100G-SMB-R [UTC]
Rectifier Diode,;
| 型号： | MBR2100G-SMB-R |
| 厂家： | 
Unisonic Technologies |
| 描述： | Rectifier Diode, 功效 测试 光电二极管 |
| 文件： | 总3页 (文件大小：146K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
UNISONIC TECHNOLOGIES CO., LTD
MBR2100
Preliminary
DIODE
SCHOTTKY BARRIER
RECTIFIER
DESCRIPTION
The UTC MBR2100 is a schottky barrier rectifier, it uses UTC’s
advanced technology to provide customers with low forward voltage
drop, high current capability and high efficiency, etc.
The UTC MBR2100 is suitable for free wheeling, high frequency
inverters, polarity protection application.
FEATURES
* Low forward voltage drop
* High efficiency
* High surge capability
SYMBOL
ORDERING INFORMATION
Ordering Number
Pin Assignment
Package
Packing
Lead Free
Halogen Free
1
K
K
2
A
A
MBR2100L-CA2-R
MBR2100L-SMB-R
MBR2100G-CA2-R
MBR2100G-SMB-R
SOD-123
SMB
Tape Reel
Tape Reel
Note: Pin assignment: K: Cathode
A: Anode
MBR2100G-CA2-R
(1)Packing Type
(2)Package Type
(3)Green Package
(1) R: Tape Reel
(2) CA2: SOD-123, SMB: SMB
(3) G: Halogen Free and Lead Free, L: Lead Free
MARKING
SOD-123
SMB
Date Code
UTC
MBR2100
Cathode Band for
uni-directional Only
L: Lead Free
G: Halogen Free
www.unisonic.com.tw
Copyright © 2019 Unisonic Technologies Co., Ltd
1 of 3
QW-R202-051.b
MBR2100
Preliminary
DIODE
ABSOLUTE MAXIMUM RATINGS (TA=25°C unless otherwise specified)
Ratings at 25°C ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
PARAMETER
DC Blocking Voltage
SYMBOL
RATINGS
100
UNIT
VRM
VRWM
VRRM
IO
V
V
V
A
Working Peak Reverse Voltage
100
Repetitive Peak Reverse Voltage
100
Average Rectified Output Current
Non-Repetitive Peak Forward Surge Current: 8.3ms
Single Half Sine-Wave Superimposed on Rated Load
Operating Junction Temperature
2.0
IFSM
40
A
TJ
-65 ~ +150
-65 ~ +150
°C
°C
Storage Temperature
TSTG
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
THERMAL DATA
PARAMETER
Typical Thermal Resistance
SYMBOL
RATINGS
25 (Note)
20 (Note)
UNIT
°C/W
°C/W
SOD-123
SMB
θJL
Note: FR-4 PCB, 2 oz Copper. Minimum recommended pad layout.
ELECTRICAL CHARACTERISTICS (TA=25°C unless otherwise specified)
PARAMETER
SYMBOL
VF
TEST CONDITIONS
IF=2.0A TJ=25°C
MIN TYP MAX UNIT
0.79
0.69
V
V
Forward Voltage Drop (Note 3)
IF=2.0A, TJ=125°C
TJ=25°C, VR=100V
TJ=125°C, VR=100V
Peak Reverse Current at Rated DC
Blocking Voltage
100 μA
IR
10
mA
Notes: 1. Measured at ambient temperature at a distance of 9.5mm from the case.
2. Minimum Pad Area.
3. Pulse test: 300μs pulse width, duty cycle 2%.
UNISONIC TECHNOLOGIES CO., LTD
2 of 3
QW-R202-051.b
www.unisonic.com.tw
MBR2100
Preliminary
DIODE
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all UTC products described or contained herein.
UTC products are not designed for use in life support appliances, devices or systems where malfunction
of these products can be reasonably expected to result in personal injury. Reproduction in whole or in
part is prohibited without the prior written consent of the copyright owner. UTC reserves the right to
make changes to information published in this document, including without limitation specifications and
product descriptions, at any time and without notice. This document supersedes and replaces all
information supplied prior to the publication hereof.
UNISONIC TECHNOLOGIES CO., LTD
3 of 3
QW-R202-051.b
www.unisonic.com.tw
相关型号：
©2020 ICPDF网 联系我们和版权申明