TDA7053A(16DIP) [UTC]
Audio Amplifier, 2 Func, Bipolar, PDIP16;型号: | TDA7053A(16DIP) |
厂家: | Unisonic Technologies |
描述: | Audio Amplifier, 2 Func, Bipolar, PDIP16 放大器 光电二极管 商用集成电路 |
文件: | 总10页 (文件大小:157K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
UTC TDA7053A LINEAR INTEGRATED CIRCUIT
STEREO BTL AUDIO OUTPUT
AMPLIFIER WITH DC VOLUME
CONTROL
DESCRIPTION
DIP-16
The UTC TDA7053A is stereo BTL output amplifiers with
DC volume control.
The UTC TDA7053A designed for use in TV and monitors,
but are also suitable for battery-fed portable recorders and
radios. DIP-16 ( 2 × 1W ) and SOP-16 ( 2 × 0.5W ) are
supplied with different output power.
FEATURES
SOP-16
*DC volume control
*Few external components
*Mute mode
*Thermal protection
*Short-circuit proof
*No switch-on and switch-off clicks
*Good overall stability
*Low power consumption
*Low HF radiation
*ESD protected on all pins.
PIN CONFIGURATION
n.c.
VC1
n.c.
1
2
3
4
5
6
7
8
16 OUT1+
n.c.
15
14
PGND1
VI(1)
Vp
13 OUT1-
12 OUT2-
VI(2)
SGND
VC2
11
10 PGND2
OUT2+
n.c.
9
UTC UNISONIC TECHNOLOGIES CO., LTD.
1
QW-R107-022,A
UTC TDA7053A LINEAR INTEGRATED CIRCUIT
PIN DESCRIPTION
PIN NO.
SYMBOL
n.c.
DESCRIPTON
1
2
Not connected
DC volume control 1
Not connected
VC1
n.c.
3
4
5
6
VI(1)
Vp
VI(2)
Voltage input 1
Positive supply voltage
Voltage input 2
7
8
9
10
11
12
13
14
15
16
SGND
VC2
OUT2+
PGND2
n.c.
OUT2-
OUT1-
PGND1
n.c.
Signal ground
DC volume control 2
Positive output 2
Power ground 2
Not connected
Negative output 2
Negative output 1
Power ground 1
Not connected
OUT1+
Positive output 1
UTC UNISONIC TECHNOLOGIES CO., LTD.
2
QW-R107-022,A
UTC TDA7053A LINEAR INTEGRATED CIRCUIT
BLOCK DIAGRAM
Vp
5
I + i
I - i
positive
output1
16
13
4
2
input 1
DC volume
control 1
Ι
negative
output1
+
TEMPERATURE
PROTECTION
STABILIZER
Vref
12
9
6
8
I - i
negative
output2
input 2
DC volume
control 2
Ⅱ
I + i
positive
output2
1,3,11,15
not
14
power
10
7
signal
ground
power
ground1 ground2
connected
UTC UNISONIC TECHNOLOGIES CO., LTD.
3
QW-R107-022,A
UTC TDA7053A LINEAR INTEGRATED CIRCUIT
ABSOLUTE MAXIMUM RATINGS
PARAMETER
SYMBOL
Vp
IoRM
RATINGS
18
UNIT
Supply Voltage
V
A
A
Repetitive Peak Output Current
Non- Repetitive Peak Output Current
Total Power Dissipation (Ta≦25℃)
DIP-16
1.25
1.5
IoSM
2.5
1.32
Ptot
W
SOP-16
Short-Circuit Time
tsc
Vn
Ta
Tstg
Tvj
1
5
hr
V
℃
℃
℃
Input Voltage Pins 2,4,,6 and 8
Operating Ambient Temperature
Storage Temperature
-40~+85
-55~+150
150
Virtual Junction Temperature
THERMAL CHARACTERISTICS
PARAMETER
SYMBOL
Rthj-a
VALUE
UNIT
K/W
Thermal Resistance From Junction To Ambient In Free Air
DIP-16
SOP-16
50
95
Power dissipation
*For DIP-16 package:
Assume VP = 6 V and RL = 8Ω
The maximum sine wave dissipation is 2 × 0.9 W = 1.8 W.
The Rthj-a of the package is 50 K/W therefore Tamb(max) = 150 - (50 × 1.8) = 60℃.
*For SOP-16 package:
Assume VP = 6 V and RL = 16Ω.
The maximum sine wave dissipation is 2 × 0.46 W = 0.92 W.
The Rthj-a of the package is 95 K/W therefore Tamb(max) = 150 - (95 × 0.92) = 62.6℃.
ELECTRICAL CHARACTERISTICS
(VP = 6V, Ta = 25℃, fi = 1 kHz; DIP-16: RL = 8Ω; SOP-16: RL = 16Ω)
PARAMETER
SYMBOL
TEST CONDITONS
MIN.
4.5
TYP. MAX. UNIT
Supply Voltage
Vp
18
25
V
Vp=6V, RL=∞, Note 1
Total Quiescent Current
Maximum Gain: V2,8 ≥1.4 V
Iq(tot)
22
mA
Output Power
Output Power
Voltage Gain
DIP-16
SOP-16
DIP-16
SOP-16
THD=10%
1.0
0.5
1.1
0.55
0.3
Pout
W
%
Pout=0.5W
Pout=0.25W
1
1
41.5
THD
Gv
0.3
39.5
1
40.5
dB
V
Input Signal Handling (RMS
value)
Gv=0dB, THD<1%
Vi (rms)
μV
Hz
dB
Noise Output Voltage
Bandwidth
Supply Voltage Ripple Rejection
DC Output Offset Voltage
Vno
B
SVRR
Fi=500kHz, Note 2
At-1 dB
210
Note 3
38
34
V16− V13 and
V12 − V9
VO (os)
0
200
mV
UTC UNISONIC TECHNOLOGIES CO., LTD.
4
QW-R107-022,A
UTC TDA7053A LINEAR INTEGRATED CIRCUIT
PARAMETER
Input Impedance (pins 4 and 6)
Channel Separation
SYMBOL
TEST CONDITONS
MIN.
15
40
TYP. MAX. UNIT
kΩ
dB
dB
dB
Zi
20
25
αCS
Rs=5kΩ
Note 5
G1=0dB, Note 6
Channel Unbalance
1
1
| G v |
Vo
Mute Position: V2,8 = 0.4 V ± 30 mV
Output Voltage In Mute Position
DC Volume Control
Gain Control
Volume Control Current
μV
Vi=1.0V, Note7
V2=V8=0V
30
40
Gc
IDC
68.5
-20
73.5
-25
dB
μA
-30
Notes:
1. With a load connected to the outputs the quiescent current will increase, the maximum value of this increase
being equal to the DC output offset voltage divided by RL.
2. The noise output voltage (RMS value) at fi = 500 kHz is measured with RS = 0Ω and bandwidth = 5 kHz.
3. 20 Hz to 300 kHz (typical).
4. The ripple rejection is measured with RS = 0Ω and fi = 100 Hz to 10 kHz. The ripple voltage of 200 mV (RMS
value) is applied to the positive supply rail.
5. The channel unbalance is measured with VDC1 = VDC2.
6. The channel unbalance at G1 = 0 dB is measured with VDC1 = VDC2.
7. The noise output voltage (RMS value) is measured with Rs = 5 kΩ unweighted.
UTC UNISONIC TECHNOLOGIES CO., LTD.
5
QW-R107-022,A
UTC TDA7053A LINEAR INTEGRATED CIRCUIT
TYPICAL PERFORMANCE CHARACTERISTICS
Quiescent Current as a function of voltage
40
THD as a function of output power
12
8
(1)Vp=4.5V
(2)Vp=6V, RL=8Ω
(3)Vp=12V,RL=25Ω
30
20
(3)
(1) (2)
4
10
0
0
10-2
10-1
10
20
0
4
8
12
16
1
Vp (V)
Pout (W)
Output power as a function of
supply voltage
THD as a function of frequency
10
2.5
(1)RL= 8Ω
(2)RL=16Ω
(3)RL=25Ω
(1)Gv=30dB, Po=0.1W
(2)Gv=40dB, Po=0.1W
8
2.0
1.5
1.0
(2)
(1)
(3)
6
4
(2)
(1)
0.5
0
2
0
10-2
4
8
12
16
10-1
102
0
1
10
f (kHz)
Vp (V)
UTC UNISONIC TECHNOLOGIES CO., LTD.
6
QW-R107-022,A
UTC TDA7053A LINEAR INTEGRATED CIRCUIT
Total worst case power dissipation as a
function of supply voltage
Voltage gain as a function of
volume control voltage
4
80
40
0
(1)RL=8Ω
(2)RL=16Ω
(3)RL=25Ω
3
2
(1)
(2) (3)
-40
-80
1
0
-120
4
8
Vp (V)
12
16
0
0
2.0
0.4
0.8
1.2
VVC (V)
1.6
Noise voltage as a function of volume
control voltage
SVRR as a function of frequency
0
1
10-1
10-2
f=22Hz ~ 22kHz
(1) VDC=1.4V, Vripple=0.2V
(2) VDC=1.4V, Vripple=0.2V
-20
-40
(1)
(2)
-60
-80
10-2
0
2.0
10-1
102
0.4
0.8
1.2
1.6
1
10
VVC (V)
f (kHz)
UTC UNISONIC TECHNOLOGIES CO., LTD.
7
QW-R107-022,A
UTC TDA7053A LINEAR INTEGRATED CIRCUIT
Volume control current as a function of
Input signal handling
THD=1%
volume control voltage
2.0
1.6
1.2
30
20
10
0
0.8
0.4
0
-10
-20
-30
0
20
0
2.0
4
8
12
16
0.4
0.8
1.2
1.6
Vp (V)
VVC (V)
UTC UNISONIC TECHNOLOGIES CO., LTD.
8
QW-R107-022,A
UTC TDA7053A LINEAR INTEGRATED CIRCUIT
TEST AND APPLICATION DIAGRAM CIRCUITS
Vp=6V
+
(1)
100nF
220μF
5
470nF
16
4
2
+
-
input 1
I + i
I - i
Rs
5kΩ
+
-
(2)
13
TEMPERATURE
MCL
STABILIZER
PROTECTION
12
9
-
470nF
I - i
6
8
input 2
+
-
(2)
I + i
DC-
volume
+
Rs
5kΩ
10
14
7
signal
ground
power
ground
Vp=6V
volume
control
maximum
voltage
gain 34 dB
2,8
56kΩ
2,8
volume
control
+
maximum
+
voltage
gain 40 dB
1MΩ
1μF
22kΩ
1μF
(1) This capacitor can be omitted if the 220µF electrolytic capacitor is
connected close to pin 5.
(2) RL = 8Ω
UTC UNISONIC TECHNOLOGIES CO., LTD.
9
QW-R107-022,A
UTC TDA7053A LINEAR INTEGRATED CIRCUIT
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UTC UNISONIC TECHNOLOGIES CO., LTD.
10
QW-R107-022,A
相关型号:
©2020 ICPDF网 联系我们和版权申明