U74LVC2G04_10 [UTC]
DUAL INVERTER; 双变频器
| 型号： | U74LVC2G04_10 |
| 厂家： | 
Unisonic Technologies |
| 描述： | DUAL INVERTER |
| 文件： | 总5页 (文件大小：158K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
UNISONIC TECHNOLOGIES CO., LTD
U74LVC2G04
CMOS IC
DUAL INVERTER
DESCRIPTION
The U74LVC2G04 is a dual inverter gate and it provides the Boolean
function Y= in positive logic.
A
This device has power-down protective circuit to prevent the device
from destruction when it is powered down.
FEATURES
* Operate From 1.65V To 5.5V
* Inputs Accept Voltages To 5.5V
* High Noise Immunity
* Low Power Dissipation
* Max tPD Of 3.2 ns At 5V
ORDERING INFORMATION
Ordering Number
Package
SOT-363
Packing
U74LVC2G04G-AL6-R
Tape Reel
MARKING
www.unisonic.com.tw
Copyright © 2010 Unisonic Technologies Co., Ltd
1 of 5
QW-R502-393.A
U74LVC2G04
CMOS IC
PIN CONFIGURATION
FUNCTION TABLE
INPUT(nA)
OUTPUT(nY)
H
L
L
H
Note: H: HIGH voltage level; L: LOW voltage level.
LOGIC DIAGRAM (positive logic)
1
1
1A
2A
1Y
2Y
1Y
2Y
1A
2A
Logic symbol
IEC logic symbol
UNISONIC TECHNOLOGIES CO., LTD
2 of 5
QW-R502-393.A
www.unisonic.com.tw
U74LVC2G04
CMOS IC
ABSOLUTE MAXIMUM RATING
PARAMETER
SYMBOL
VCC
RATINGS
-0.5 ~ +6.5
-0.5 ~ +6.5
-0.5 ~ VCC +0.5
-0.5 ~ +6.5
±100
UNIT
V
Supply Voltage
Input Voltage
VIN
V
Active Mode
V
Output Voltage
VOUT
Power-Down Mode
V
VCC or GND Current
ICC
IOUT
IIK
mA
mA
mA
mA
mW
°C
Continuous Output Current (VOUT=0 to VCC
)
±50
Input Clamp Current (VIN<0)
-50
Output Clamp Current (VOUT>VCC or VOUT<0 )
Power Dissipation (TA=-40°C ~ +125°C)
Operating Junction Temperature
Storage Temperature
IOK
PD
±50
300
TJ
-40 ~ +125
-65 ~ +150
TSTG
°C
Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
Note:
RECOMMENDED OPERATING CONDITIONS
PARAMETER
SYMBOL
VCC
MIN
1.65
0
TYP
MAX UNIT
Supply Voltage
Input Voltage
5.5
5.5
VCC
5.5
20
V
V
VIN
Active Mode
0
V
Output Voltage
VOUT
tR / tF
Power-Down Mode
VCC=1.65V to 2.7V
VCC=2.7V to 5.5V
0
V
0
ns/V
ns/V
Input Transition Rise or Fall Rate
0
10
ELECTRICAL CHARACTERISTICS (TA =25°C , unless otherwise specified)
PARAMETER
SYMBOL
TEST CONDITIONS
MIN
0.65*VCC
1.7
TYP
MAX UNIT
VCC=1.65V ~ 1.95V
V
V
V
V
VCC=2.3V ~ 2.7V
VCC=2.7V ~ 3.6V
High-level Input Voltage
Low-level Input Voltage
VIH
2
VCC=4.5V ~ 5.5V
0.7*VCC
VCC=1.65V ~ 1.95V
VCC=2.3V ~ 2.7V
VCC=2.7V ~ 3.6V
V
V
0.35*VCC
0.7
VIL
0.8
V
VCC=4.5V ~ 5.5V
V
0.3*VCC
IOH=-100μA
IOH=-4mA
IOH=-8mA
IOH=-12mA
IOH=-24mA
IOH=-32mA
IOL=100μA
IOL=4mA
VCC=1.65 ~ 5.5V
VCC=1.65V
VCC=2.3V
V
VCC-0.1
1.2
V
1.9
V
High-Level Output Voltage
Low-Level Output Voltage
VOH
VCC=2.7V
2.2
V
VCC=3.0V
2.3
V
VCC=4.5V
3.8
V
VCC=1.65 ~ 5.5V
VCC=1.65V
VCC=2.3V
0.1
0.45
0.3
V
V
IOL=8mA
V
VOL
IOL=12mA
IOL=24mA
IOL=32mA
VCC=2.7V
0.4
V
VCC=3.0V
0.55
0.55
±5
V
VCC=4.5V
V
Input Leakage Current
II(LEAK) VIN=5.5V or GND, VCC=5.5V
±0.1
±0.1
μA
μA
Power OFF Leakage Current
IOFF
VIN or VOUT=5.5V, VCC=0V
VIN=VCC or GND, IOUT=0
±10
Quiescent Supply Current
IQ
0.1
5
10
μA
μA
VCC=5.5V
Additional Quiescent Supply
Current Per Input Pin
VCC=2.3 ~ 5.5V, One input at VCC-0.6V,
ΔICC
500
Other inputs at VCC or GND
UNISONIC TECHNOLOGIES CO., LTD
3 of 5
QW-R502-393.A
www.unisonic.com.tw
U74LVC2G04
CMOS IC
SWITCHING CHARACTERISTICS (TA=25°С)
PARAMETER
SYMBOL
TEST CONDITIONS
VCC=1.8±0.15V, RL=1KΩ
MIN
1.0
1.0
1.0
0.5
1.0
TYP MAX UNIT
3.5
2.2
2.7
2.7
1.9
8.0
4.4
5.2
4.1
3.2
ns
ns
ns
ns
ns
CL=30pF
CL=50pF
VCC=2.5±0.2V, RL=500Ω
VCC=2.7V, RL=500Ω
Propagation delay from input
(A) to output(Y)
tPLH
tPHL
VCC=3.3±0.3V, RL=500Ω
VCC=5±0.5V, RL=500Ω
UNISONIC TECHNOLOGIES CO., LTD
4 of 5
QW-R502-393.A
www.unisonic.com.tw
U74LVC2G04
CMOS IC
TEST CIRCUIT AND WAVEFORMS
Inputs
VCC
VM
CL
RL
VIN
VCC
VCC
2.7V
2.7V
VCC
tR, tF
≤2ns
1.8V±0.15V
2.5V±0.2V
2.7V
VCC/2
VCC/2
1.5V
30pF
30pF
50pF
50pF
50pF
1KΩ
500Ω
500Ω
500Ω
500Ω
≤2ns
≤2.5ns
≤2.5ns
≤2.5ns
3.3V±0.3V
5V±0.5V
1.5V
VCC/2
Note: CL includes probe and jig capacitance.
All input pulses are supplied by generators having the following characteristics: PRR ≤10MHz, Zo = 50Ω.
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
5 of 5
QW-R502-393.A
www.unisonic.com.tw
相关型号：
©2020 ICPDF网 联系我们和版权申明