UC2844L-S08-T [UTC]

HIGH PERFORMANCE CURRENT MODE PWM CONTROLLERS;
UC2844L-S08-T
型号: UC2844L-S08-T
厂家: Unisonic Technologies    Unisonic Technologies
描述:

HIGH PERFORMANCE CURRENT MODE PWM CONTROLLERS

文件: 总7页 (文件大小:294K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
UNISONIC TECHNOLOGIES CO., LTD  
UC2844/45  
LINEAR INTEGRATED CIRCUIT  
HIGH PERFORMANCE  
CURRENT MODE PWM  
CONTROLLERS  
„
DESCRIPTION  
The UTC UC2844/2845 are high performance fixed frequency  
current mode controllers that specifically designed for Off-Line and  
DC to DC converter applications with minimal external parts count.  
The differences between UC2844 and UC2845 are the maximum  
duty cycle ranges and under-voltage lockout thresholds. The  
UC2844 ideally suited to off-line applications with UVLO thresholds  
of 16V(ON) and 10V(OFF), and UC2845 has UVLO thresholds of  
8.5V(ON) and 7.6V(OFF) for lower voltage applications.  
„
FEATURES  
* Operation output switching frequency up to 500 kHz  
* Output deadtime adjustable from 50% to 70%  
* Automatic feed forward compensation  
* Latching PWM for cycle-by-cycle current limiting  
* High current totem pole output  
* Internally trimmed reference with under voltage lockout  
* UVLO with hysteresis  
* Low startup and operating current  
„
ORDERING INFORMATION  
Ordering Number  
Lead Free  
Package  
Packing  
Halogen Free  
UC2844G-S08-R  
UC2844G-S08-T  
UC2845G-S08-R  
UC2845G-S08-T  
UC2844L-S08-R  
SOP-8  
SOP-8  
SOP-8  
SOP-8  
Tape Reel  
Tube  
UC2844L-S08-T  
UC2845L-S08-R  
Tape Reel  
Tube  
UC2845L-S08-T  
www.unisonic.com.tw  
Copyright © 2012 Unisonic Technologies Co., Ltd  
1 of 7  
QW-R103-051.B  
UC2844/45  
LINEAR INTEGRATED CIRCUIT  
„
PIN CONFIGURATION  
„
PIN DESCRIPTION  
PIN NO  
1
PIN NAME  
FUNCTION  
Compensation Error amplifier output, this pin is made available for loop compensation.  
Voltage Feedback, the inverting input of the Error Amplifier. It is normally connected to the  
switching power supply output through a resistor divider.  
2
3
VFB  
A voltage proportional to inductor current is connected to this input. The PWM uses this  
information to terminate the output switch conduction.  
ISENSE  
The Oscillator frequency and maximum output duty cycle are programmed by connecting  
resistor RT to VREF and capacitor CT to ground. Operation to 1 MHz is possible.  
4
5
6
RT/CT  
GND  
Power ground.  
This output directly drives the gate of a power MOSFET. Peak currents up to 1A are  
sourced and sunk by this pin. The output switches at one-half the oscillator frequency.  
Positive supply.  
Output  
7
8
VCC  
VREF  
Reference output, provides charging current for capacitor CT though resistor RT.  
UNISONIC TECHNOLOGIES CO., LTD  
2 of 7  
QW-R103-051.B  
www.unisonic.com.tw  
UC2844/45  
LINEAR INTEGRATED CIRCUIT  
„
BLOCK DIAGRAM  
UNISONIC TECHNOLOGIES CO., LTD  
3 of 7  
QW-R103-051.B  
www.unisonic.com.tw  
UC2844/45  
LINEAR INTEGRATED CIRCUIT  
„
ABSOLUTE MAXIMUM RATINGS (TA=25°С, unless otherwise specified)  
PARAMETER  
SYMBOL  
VIN  
RATINGS  
-0.3 ~ +5.5  
30  
UNIT  
V
Current Sense and Voltage feedback Inputs  
Total Power Supply and Zener Current  
Error Amp Output Sink Current  
Output Current, Source or Sink (Note 2)  
Output Energy (Capacitive Load per cycle)  
Power Dissipation  
(ICC+IZ)  
ISINK  
IOUT  
mA  
mA  
A
10  
1.0  
W
5.0  
μJ  
mW  
°С  
PD  
800  
Junction Temperature  
TJ  
+150  
Operating Junction Temperature  
Storage Temperature  
TJ(OPR)  
TSTG  
-40 ~ +120  
-65 ~ +150  
°С  
°С  
Note:1.Absolute maximum ratings are those values beyond which the device could be permanently damaged.  
Absolute maximum ratings are stress ratings only and functional device operation is not implied.  
2.Maxmum package power dissipation limits must be observed.  
„
THERMAL DATA  
PARAMETER  
Junction to Ambient  
SYMBOL  
RATINGS  
156  
UNIT  
θJA  
°С /W  
„
ELECTRICAL CHARACTERISTICS  
(TA=25°С, VCC=15V, RT=10k, CT=3.3nF, -40°С ≤ TA 120°С, unless otherwise specified)  
PARAMETER  
REFERENCE SECTION  
Reference Output Voltage  
Line Regulation  
SYMBOL  
TEST CONDITIONS  
MIN  
TYP  
MAX UNIT  
VREF  
VOUT  
VOUT  
IOUT=1.0mA,TJ=25°С  
4.95  
5.0  
2.0  
3.0  
0.2  
5.05  
20  
V
mV  
V
CC=12V ~ 25V  
Load Regulation  
I
OUT=1.0mA ~ 20mA  
25  
mV  
Temperature Stability  
Total Output Variation over Line,  
Load, Temperature  
tS  
mV/°С  
VREF  
4.9  
-30  
5.1  
V
Output Noise Voltage  
Long Term Stability  
eN  
S
f=10Hz ~ 10kHz, TJ=25°С  
TA=125°С for 1000 Hours  
50  
5
μV  
mV  
mA  
Output Short Circuit Current  
OSCILLATOR SECTION  
Oscillator Voltage Swing  
Discharge Current  
ISC  
-85  
-180  
VOSC  
IDSG  
1.6  
10.8  
52  
V
VOSC=2.0V, TJ=25°С  
TJ=25°С,  
mA  
47  
46  
57  
60  
Frequency  
fOSC  
kHz  
TLOW TA THI  
Frequency Change with Voltage  
Frequency Change with Temperature  
ERROR AMPLIFIER SECTION  
Voltage Feedback Input  
ΔfOSC/ΔV VCC=12V ~ 25V  
ΔfOSC/ΔT TLOW TA THI  
0.2  
5.0  
1.0  
%
%
VFB  
VOH  
VOUT=2.5V  
2.45  
5.0  
2.50  
6.2  
0.8  
12  
2.55  
1.1  
V
V
High  
Output Voltage Swing  
Low  
RL=15k to ground, VFB=2.3V  
RL=15k to VREF, VFB=2.7V  
VOUT=1.1V, VFB=2.7V  
VOUT=5.0V, VFB=2.3V  
VFB=2.7V  
VOL  
Sink  
Output Current  
ISINK  
2.0  
mA  
Source  
ISOURCE  
II(BIAS)  
GVO  
-0.5  
-1.0  
-0.1  
90  
Input Bias Current  
-1.0  
μA  
dB  
Open Loop Voltage Gain  
Power Supply Rejection Ratio  
Unity Gain Bandwidth  
VOUT=2.0V ~ 4.0V  
VCC=12V ~ 25V  
65  
60  
PSRR  
GBW  
70  
dB  
TJ=25°С  
0.7  
1.0  
MHz  
UNISONIC TECHNOLOGIES CO., LTD  
4 of 7  
QW-R103-051.B  
www.unisonic.com.tw  
UC2844/45  
LINEAR INTEGRATED CIRCUIT  
„
ELECTRICAL CHARACTERISTICS(Cont.)  
PARAMETER  
SYMBOL  
TEST CONDITIONS  
MIN  
TYP  
MAX UNIT  
CURRENT SENSE SECTION  
Current Sense Input Voltage Gain  
Maximum Current Sense Input  
Threshold  
GV  
(Note 2, 3)  
(Note 2)  
2.85  
0.9  
3.0  
1.0  
3.15  
1.1  
V/V  
V
VI(THR)  
II(BIAS)  
Input Bias Current  
-2.0  
70  
-10  
μA  
dB  
ns  
Power Supply Rejection Ratio  
Propagation Delay  
PSRR VCC=12V ~ 25V (Note4)  
tPLH(IN/OUT)  
150  
300  
OUTPUT SECTION  
ISINK=20mA  
VOL  
0.1  
1.6  
13.5  
13.4  
0.1  
50  
0.4  
2.2  
Low  
V
V
ISINK=200mA  
Output Voltage  
High  
ISINK=20mA  
VOH  
13  
12  
ISINK=200mA  
Output Voltage with UVLO Activated  
Output Voltage Rise Time  
VOL(UVLO  
)
VCC=6.0V, ISINK=1.0mA  
CL=1.0nF,TJ=25°С  
CL=1.0nF,TJ=25°С  
1.1  
150  
150  
V
tR  
tF  
ns  
ns  
Output Voltage Fall Time  
50  
UNDERVOLTAGE LOCKOUT SECTION  
UC2844  
Startup Threshold  
15  
7.8  
9.0  
7.0  
16.0  
8.4  
17  
9.0  
VTHR  
V
V
UC2845  
UC2844  
UC2845  
10.0  
7.6  
11.0  
8.2  
Minimum Operating  
Voltage After Turn-On  
PWM SECTION  
VCC(MIN)  
MAX  
MIN  
DCMAX  
DCMIN  
47  
30  
48  
50  
0
%
%
Duty Cycle  
TOTAL DEVICE  
Power Supply Zener Voltage  
VZ  
ICC=25mA  
VCC=6.5V  
VCC=14V  
36  
0.5  
12  
-
V
UC2845  
UC2844  
1.0  
17  
Power Supply Current  
(Note 4)  
ICC  
mA  
Note: 1. Low duty cycle pulse techniques are used during test to maintain junction temperature as close to ambient  
as possible.  
2. This parameter is measured at the latch trip point with VFB=0V.  
3. Comparator gain is defined as:  
ΔV Output Compensation  
AV=  
ΔV Current Sense Input  
4. Adjust VCC above the startup threshold before setting to 15V.  
UNISONIC TECHNOLOGIES CO., LTD  
5 of 7  
QW-R103-051.B  
www.unisonic.com.tw  
UC2844/45  
LINEAR INTEGRATED CIRCUIT  
„
TYPICAL CHARACTERISTICS  
Timing Resistor vs. Oscillator Frequency  
Output Deadtime vs. Oscillator Frequency  
1.0nF  
75  
70  
100  
50  
VCC = 15V  
TA = 25℃  
2.0nF  
5.0nF  
20  
65  
60  
55  
50  
CT = 10nF  
10  
5.0  
2.0  
1.0  
Note: Output Switches At  
One-Half The Oscillator  
Frequency  
100pF  
200pF  
500pF  
10k  
20k  
50k  
100k 200k  
500k 1.0M  
10k  
20k  
50k  
100k 200k  
500k 1.0M  
Oscillator Frequency, IOSC (Hz)  
Oscillator Frequency, IOSC (Hz)  
Current Sense Input Threshold vs. Error Amp  
Output Voltage  
Error Amp Open Loop Gain Phase vs. Frequency  
VCC = 15V  
1.2  
1.0  
0.8  
100  
80  
0
VOUT = 2.0V ~ 4.0V  
30  
RL = 100k  
TA = 25℃  
Gain  
TA = 125℃  
TA = 25℃  
60  
60  
40  
20  
90  
0.6  
0.4  
Phase  
120  
TA = -55℃  
0
150  
180  
0.2  
0
VCC = 15V  
-20  
10  
100  
1.0k  
10k  
100k  
1.0M 10M  
0
2.0  
4.0  
6.0  
8.0  
Error Amp Output Voltage, VOUT (V)  
Frequency, f (Hz)  
UNISONIC TECHNOLOGIES CO., LTD  
6 of 7  
QW-R103-051.B  
www.unisonic.com.tw  
UC2844/45  
LINEAR INTEGRATED CIRCUIT  
„
TYPICAL CHARACTERISTICS(Cont.)  
UTC assumes no responsibility for equipment failures that result from using products at values that  
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or  
other parameters) listed in products specifications of any and all UTC products described or contained  
herein. UTC products are not designed for use in life support appliances, devices or systems where  
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in  
whole or in part is prohibited without the prior written consent of the copyright owner. The information  
presented in this document does not form part of any quotation or contract, is believed to be accurate  
and reliable and may be changed without notice.  
UNISONIC TECHNOLOGIES CO., LTD  
7 of 7  
QW-R103-051.B  
www.unisonic.com.tw  

相关型号:

UC2844N

Current Mode PWM Controller
TI

UC2844N

CURRENTMODE PWM CONTROLLER
STMICROELECTR

UC2844N

HIGH PERFORMANCE CURRENT MODE CONTROLLERS
ONSEMI

UC2844N

HIGH PERFORMANCE CURRENT MODE CONTROLLERS
MOTOROLA

UC2844N

HIGH PERFORMANCE CURRENT MODE CONTROLLERS
FREESCALE

UC2844NG

High Performance Current Mode Controllers
ONSEMI

UC2844NG4

CURRENT MODE PWM CONTROLLER
TI

UC2844P

Current-Mode SMPS Controller
ETC

UC2844Q

Current-Mode SMPS Controller
ETC

UC2844QTR

Current-Mode SMPS Controller
ETC

UC2844W

SMPS Controller
ETC

UC2844_12

HIGH PERFORMANCE CURRENT MODE PWM CONTROLLERS
UTC