UC3883L-AG6-A-R [UTC]

Switching Regulator/Controller,;
UC3883L-AG6-A-R
型号: UC3883L-AG6-A-R
厂家: Unisonic Technologies    Unisonic Technologies
描述:

Switching Regulator/Controller,

文件: 总7页 (文件大小:287K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
UNISONIC TECHNOLOGIES CO., LTD  
UC3883  
Preliminary  
CMOS IC  
HIGH PERFORMANCE  
CURRENT MODE PWM  
CONTROLLER WITH PEAK  
LOAD  
4
5
6
3
2
1
DESCRIPTION  
UTC UC3883 is a highly integrated current mode PWM control  
SOT-26  
IC optimized for high performance, low standby power and cost  
effective offline flyback converter applications.  
PWM switching frequency at normal operation is internally fixed  
and is trimmed to tight range. At no load or light load condition, the  
IC operates in extended ‘burst mode’ to minimize switching loss.  
Lower standby power and higher conversion efficiency is thus  
achieved.  
VCC low startup current and low operating current contribute to a  
reliable power on startup and low standby design with UTC  
UC3883.  
UTC UC3883 offers complete protection coverage with  
auto-recovery including Cycle-by-Cycle current limiting (OCP), over  
load protection (OLP), over temperature protection (OTP) and VCC  
under voltage lockout (UVLO). It also provides the over voltage  
protection (OVP) protections with latched shut down. Excellent EMI  
performance is achieved with UTC proprietary frequency shuffling  
technique.  
The tone energy at below 20KHZ is minimized in the design and  
audio noise is eliminated during operation.  
FEATURES  
* Power on Soft Start Reducing MOSFET VDS Stress  
* Frequency shuffling for EMI  
* Extended Burst Mode Control For Improved Efficiency and  
Minimum Standby Power Design  
* Ultra Low Operating Current at Light Load (typical 0.6mA)  
* Audio Noise Free Operation  
* Normal 65KHz Switching Frequency  
* Frequency Triple for peak load (180KHz)  
* Adjustable Overload Protection (OLP) delay time  
* Comprehensive Protection Coverage  
VCC Under Voltage Lockout with Hysteresis (UVLO)  
Cycle-by-cycle over current threshold setting for constant output  
power limiting over universal input voltage range  
Overload Protection (OLP) with autorecovery  
External (if NTC resistor is connected at CT/RT pin) or internal (if  
capacitor is connected at CT/RT pin) Over Temperature  
Protection (OTP) with autorecovery.  
VCC Over Voltage Protection (OVP) with latch shut down  
www.unisonic.com.tw  
1 of 7  
Copyright © 2020 Unisonic Technologies Co., Ltd  
QW-R103-174.b  
UC3883  
Preliminary  
CMOS IC  
ORDERING INFORMATION  
Ordering Number  
Package  
Packing  
Lead Free  
Halogen Free  
UC3883L-AG6-A-R  
UC3883L-AG6-B-R  
UC3883G-AG6-A-R  
UC3883G-AG6-B-R  
SOT-26  
SOT-26  
Tape Reel  
Tape Reel  
UC3883G-AG6-A-R  
(1) R: Tape Reel  
(2) X: refer to PIN CONFIGURATION  
(1)Packing Type  
(2)Pin Assignment  
(3)Green Package  
(4)Package Type  
(3) G: Halogen Free and Lead Free, L: Lead Free  
(4) AG6: SOT-26  
MARKING  
6
5
4
U883  
Pin Assignment  
1
2
3
UNISONICTECHNOLOGIESCO.,LTD  
2 of 7  
QW-R103-174.b  
www.unisonic.com.tw  
UC3883  
Preliminary  
CMOS IC  
PIN CONFIGURATION  
GND  
Gate  
6
6
5
4
1
1
2
3
VCC  
CS  
FB  
FB 2  
CT/RT  
5 VCC  
CS  
CT/RT  
GND  
3
4
Gate  
UC3883-A  
UC3883-B  
PIN DESCRIPTION  
PIN NO.  
PIN NAME  
DESCRIPTION  
UC3883A  
UC3883B  
1
2
3
4
5
4
6
1
VCC  
CS  
Power Supply  
Current sense input  
Gate  
GND  
Totem-pole gate driver output for power MOSFET  
Ground  
Dual functions pin. Connecting a NTC resistor to ground for over  
temperature control. Connecting a capacitor to ground sets OLP  
delay time  
5
6
3
2
CT/RT  
FB  
Feedback input pin. The PWM duty cycle is determined by voltage  
level into this pin and the current-sense signal at Pin 4.  
BLOCK DIAGRAM  
VCC  
+
+
-
VCC OVP  
INTERNAL BIAS &  
REFERENCE VOLTAGE  
OVP1  
30V  
-
20V/8.2V  
Burst_en  
OTP_en  
Internal OTP  
PROTECTIONS  
OUT  
VCC OVP  
CLK1  
Delay  
16V  
OLP_en  
1.05/1.15V  
5.7V  
+
-
Burst_en  
5.7V  
100uA  
4.6V  
-
OLP_en  
OLP  
+
FB  
-
1V  
OTP_en  
OTP  
2R  
R
CT/RT  
+
-
PWM  
+
OSC1  
CLK1  
SLOPE  
SLOPE  
COMPENSATION  
COMPENSATION  
Q
S
R
LEB  
OSC  
+
CS  
OCP  
-
Vcsth  
FB  
GND  
UNISONICTECHNOLOGIESCO.,LTD  
3 of 7  
QW-R103-174.b  
www.unisonic.com.tw  
UC3883  
Preliminary  
CMOS IC  
ABSOLUTE MAXIMUM RATING  
PARAMETER  
SYMBOL  
VCC  
RATINGS  
-0.3 ~ 36  
-0.3 ~ VCC+0.3  
-0.3 ~ 6  
UNIT  
V
Supply Voltage  
Input Voltage to OUT Pin  
FB, CS, DEM  
VOUT  
V
V
Power Dissipation @ TA=+25°C  
Junction Temperature  
PD  
TJ  
400  
mW  
°C  
°C  
°C  
+150  
Operating Ambient Temperature  
Storage Temperature Range  
TOPR  
TSTG  
-40 ~ +125  
-65 ~ +150  
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.  
Absolute maximum ratings are stress ratings only and functional device operation is not implied.  
RECOMMENDED OPERATING CONDITIONS  
PARAMETER  
SYMBOL  
VCC  
RATINGS  
9 ~ 28  
UNIT  
V
Supply Voltage  
Start up Resistor  
VCC Capacitor  
0.86 ~ 4.4  
2.2 ~ 4.7  
MΩ  
μF  
THERMAL DATA  
PARAMETER  
SYMBOL  
RATING  
250  
UNIT  
°C/W  
Junction to Ambient  
θJA  
ELECTRICAL CHARACTERISTICS (VCC=15V, TA=25°C, unless otherwise specified)  
PARAMETER  
SYMBOL  
TEST CONDITIONS  
MIN TYP MAX UNIT  
SUPPLY VOLTAGE  
For UC3883A  
18  
20  
22  
V
V
VCC (ON)  
VCC(ON)  
For UC3883B  
13.8 15.3 16.8  
VCC (OFF)  
VCC(MIN)  
ISTR  
7.2  
8.2  
1.5  
0.85  
0.5  
30  
9.2  
5
V
Startup Current  
VCC<VCC(ON)-0.5V  
VFB=3V  
μA  
mA  
mA  
V
Operating Current  
VCC OVP Threshold  
IOP  
VFB=Burst Level  
VCC(OVP)  
28  
60  
32  
OSCILLATOR & SWITCHING FREQUENCY  
Switching Frequency  
Temperature Stability  
Voltage Stability  
F(SW)  
65  
70  
10  
10  
KHz  
%
FDT  
FDV  
Guaranteed by Design  
VFB=3.9V  
%
Green Mode Frequency  
Frequency Spreading Range  
Max.Duty Cycle  
F(SW_GR)  
ΔOSC  
DCMAX  
20  
+9  
70  
KHz  
%
-9  
77  
85  
%
VOLTAGE FEEDBACK  
Open Loop Voltage  
VFB_Open  
VFB_OLP  
TD_OLP  
5.00 5.40 5.80  
4.60  
V
V
OLP Level  
OLP De-Bounce Time  
Burst-Mode Enter FB Voltage  
Burst-Mode Quit FB Voltage  
FB Pin Short Current  
VFB>5V  
60  
100 160  
1.05  
mS  
V
VFB-IN  
VFB-OUT  
IFB_SHORT  
1.15  
V
130  
μA  
UNISONICTECHNOLOGIESCO.,LTD  
4 of 7  
QW-R103-174.b  
www.unisonic.com.tw  
UC3883  
Preliminary  
CMOS IC  
ELECTRICAL CHARACTERISTICS (Cont.)  
PARAMETER SYMBOL  
TEST CONDITIONS  
MIN TYP MAX UNIT  
Current Sensing  
Current Limiting Threshold Voltage  
Current Limiting Threshold Voltage  
with 0% Duty  
VCS_MAX  
VCS_L  
TLEB  
Read cs pin in testmode  
Read cs pin in testmode  
Guaranteed by Design  
Guaranteed by Design  
0.88  
0.43  
350  
V
V
Lead Edge Blanking Time  
SDSP(Secondary Diode Short  
Protection) CS pin Level  
CS DCOVP Level  
ns  
V
VSCP  
1.32  
VCS_DCOVP Guaranteed by Design  
Guaranteed by Design  
0.44  
10  
V
Soft Start Time  
mS  
GATE DRIVE OUTPUT  
Output Low Level  
VOL  
VOH  
tR  
VCC=15V, IOUT=-20mA  
VCC=15V, IOUT=20mA  
10% to 90% of VOUT, CL=1nF  
90% to 10% of VOUT, CL=1nF  
VCC=20V  
1
V
V
Output High Level  
9
Rising Time  
200  
60  
nS  
nS  
V
Falling Time  
tF  
Out Clamping  
Vclamp  
15  
CT/RT Detection  
Td_OLP  
CT=100nF  
1
OLP De-bounce time  
S
No capacitor connected to  
CT/RT  
Td_OLP_inner  
12  
OTP Threshold Level  
Output current of CT/RT pin  
OTP De-Bounce Time  
THERMAL SHUT DOWN  
OTP Threshold  
VOTP  
IRT  
0.92 0.98 1.04  
V
94  
100  
106  
7
μA  
TOTP  
Guaranteed by Design  
Times  
150  
°C  
UNISONICTECHNOLOGIESCO.,LTD  
5 of 7  
QW-R103-174.b  
www.unisonic.com.tw  
UC3883  
Preliminary  
CMOS IC  
TYPICAL APPLICATION CIRCUIT  
VACin  
C4  
R7  
L1  
EMI  
VO  
TX  
FILTER  
D1  
Rst  
1.5M  
C5  
R6  
D2  
Cbuk  
C1  
C3  
Rst  
1.5M  
D4  
D3  
+
+
C10  
10uF  
C7  
1uF  
R3  
R1  
R4  
UTC UC3883  
C2  
5
1
3
2
VCC  
Gate  
CS  
CT/RT  
GND  
FB  
D5  
RG  
M1  
R5  
4
6
TL431  
R8  
RNTC  
R2  
RCS  
C6  
CFB  
R101  
Fig.1 Application Circuit for ADJ-OTP  
VACin  
C4  
R7  
L1  
EMI  
VO  
TX  
FILTER  
D1  
Rst  
1.5M  
C5  
R6  
D2  
Cbuk  
C1  
C3  
Rst  
1.5M  
D4  
D3  
+
+
C10  
10uF  
C7  
1uF  
R3  
R1  
R4  
UTC UC3883  
C2  
5
1
3
2
VCC  
Gate  
CS  
CT/RT  
GND  
FB  
D5  
RG  
M1  
R5  
4
6
TL431  
R8  
CT  
R2  
RCS  
C6  
CFB  
R101  
Fig.2 Application Circuit for ADJ-OLP-Debounce time(0~10s)  
UNISONICTECHNOLOGIESCO.,LTD  
6 of 7  
QW-R103-174.b  
www.unisonic.com.tw  
UC3883  
Preliminary  
CMOS IC  
UTC assumes no responsibility for equipment failures that result from using products at values that  
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other  
parameters) listed in products specifications of any and all UTC products described or contained herein.  
UTC products are not designed for use in life support appliances, devices or systems where malfunction  
of these products can be reasonably expected to result in personal injury. Reproduction in whole or in  
part is prohibited without the prior written consent of the copyright owner. UTC reserves the right to  
make changes to information published in this document, including without limitation specifications and  
product descriptions, at any time and without notice. This document supersedes and replaces all  
information supplied prior to the publication hereof.  
UNISONICTECHNOLOGIESCO.,LTD  
7 of 7  
QW-R103-174.b  
www.unisonic.com.tw  

相关型号:

UC3883L-AG6-B-R

Switching Regulator/Controller,
UTC

UC3886

Average Current Mode PWM Controller IC
TI

UC3886D

Average Current Mode PWM Controller IC
TI

UC3886DG4

Average Current Mode PWM Controller IC
TI

UC3886DTR

Average Current Mode PWM Controller IC 16-SOIC 0 to 70
TI

UC3886DTRG4

1.5A SWITCHING CONTROLLER, 110kHz SWITCHING FREQ-MAX, PDSO16, SOIC-16
TI

UC3886J

1.5A SWITCHING CONTROLLER, 300kHz SWITCHING FREQ-MAX, CDIP16
TI

UC3886N

Average Current Mode PWM Controller IC
TI

UC3886NG4

Average Current Mode PWM Controller IC
TI

UC388DW

UC388DW
TI

UC388DWTR

UC388DWTR
TI

UC388J

UC388J
TI