TFS1200 [VECTRON]

Filter specification; 过滤器规格


型号：	TFS1200
厂家：	Vectron International, Inc
描述：	Filter specification 过滤器规格过滤器 LTE
文件：	总5页 (文件大小：235K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Filename: tfs 1200.doc

Version 1.3

09.06.2006

VI TELEFILTER

Filter specification

TFS 1200

1/5

Measurement condition

Ambient temperature:

Input power level:

Terminating impedance: *

Input:

°C

dBm

168Ω // -1,0pF

Output:

Characteristics

Remark:

The reference level for the relative attenuation a of the TFS 1200 is the minimum of the pass band attenuation a

. The minimum of the pass band

min

rel

attenuation a

is defined as the insertion loss a . The centre frequency f is the arithmetic mean value of the upper and lower frequencies at the 3 dB

min

e c

filter attenuation level relative to the insertion loss a . The nominal frequency f is fixed at 1200,0 MHz without any tolerance. The given values for both the

relative attenuation a and the group delay ripple have to be achieved at the frequencies given below even if the centre frequency f is shifted due to the

temperature coefficient of frequency TC in the operating temperature range and due to a production tolerance for the centre frequency f .

rel

D a t a

typ. value

tolerance / limit

3,25

max.

6,0

Insertion loss

(reference level)

f_N

1200,0

MHz

Nominal frequency

Centre frequency

Passband

f_C

MHz

f_N

± 100,0

1,0

kHz

p-p

0,3

max.

Pass band ripple

Relative attenuation

rel

MHz

f_N

…

f_N

0,1

180

1150

0,3

max.

f_N

MHz

…

f_N

MHz

min.

max.

100

Group delay ripple within PB

dBm

max.

dBm

Input power level

OTR

- 40 °C ... + 85°C

Operating temperature range

Storage temperature range

- 45 °C ... + 90°C

0,05

°C

Frequency inversion temperature

Temperature coefficient of frequency

TC **

ppm/K²

*) The terminating impedances depend on parasitics and q-values of matching elements and the board used, and are to be understood as reference

values only. Should there be additional questions do not hesitate to ask for an application note or contact our design team.

**) ∆f(Hz) = TC (ppm/K²) x (T-T₀)²x f (MHz)

Generated:

Checked / Approved:

Tele Filter GmbH

Potsdamer Straße 18

D 14 513 TELTOW / Germany

Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30

E-Mail: tft@telefilter.com

VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is

assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.

Filename: tfs 1200.doc

Version 1.3

09.06.2006

VI TELEFILTER

Filter specification

TFS 1200

2/5

Filter characteristic

-2

0.5

-10

-20

-30

-40

-50

-60

0.45

0.4

-4

-6

0.35

0.3

-8

0.25

-10

1065 1092

1119 1146

1173

frequency in MHz

1200 1227

1254 1281

1308

1335

1199

1199.5

1200

1200.5

1201

1201.5

frequency in MHz

Construction and pin connection

(All dimensions in mm)

Ground

Input

Ground

Output

Ground

C00

● U23

Date code: Year + week

...

2006

2007

2008

50 Ohm Test circuit

1, 3, 4, 5, 7, 8

VI TELEFILTER

Potsdamer Straße 18

D 14 513 TELTOW / Germany

Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30

E-Mail: tft@telefilter.com

VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is

assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information

Filename: tfs 1200.doc

Version 1.3

09.06.2006

VI TELEFILTER

Filter specification

TFS 1200

3/5

Stability characteristics

After the following tests the filter shall meet the whole specification:

1. Shock:

500g, 1 ms, half sine wave, 3 shocks each plane;

DIN IEC 68 T2 - 27

2. Vibration:

10 Hz to 500 Hz, 0,35 mm or 5 g respectively, 1 octave per min, 10 cycles per plan, 3 plans;

DIN IEC 68 T2 - 6

3. Change of

temperature:

-55 °C to 125°C / 30 min. each / 10 cycles

DIN IEC 68 part 2 – 14 Test N

4. Resistance to

solder heat (reflow):

reflow possible: twice max.;

for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4;

Packing

Tape & Reel:

IEC 286 – 3, with exeption of value for N and minimum bending radius;

tape type II, embossed carrier tape with top cover tape on the upper side;

max. pieces of filters peer reel:

reel of empty components at start:

reel of empty components at start including leader:

trailer:

3000

min. 300 mm

min. 500 mm

min. 300 mm

Pull Off Direction

Tape (all dimensions in mm)

Date Code

: 12,00 ± 0,3

G(min)

D1(min)

4,00 ± 0,1

1,50 +0,1/-0

1,75 ± 0,1

5,50 ± 0,05

0,75

2,00 ± 0,05

8,00 ± 0,1

1,50

Typ

PIN Marker

4,30 ± 0,1

9,5 ± 0,1

Reel (all dimensions in mm)

:330

: 12,4 +2/-0

W2(max) : 18,4

N(min)

: 50

: 13,0 +0,5/-0,2

The minimum bending radius is 45 mm.

VI TELEFILTER

Potsdamer Straße 18

D 14 513 TELTOW / Germany

Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30

E-Mail: tft@telefilter.com

VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is

assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information

Filename: tfs 1200.doc

Version 1.3

09.06.2006

VI TELEFILTER

Filter specification

TFS 1200

4/5

Air reflow temperature conditions

Conditions

Exposure

Average ramp-up rate (30°C to 217°C)

> 100°C

less than 3°C/second

between 300 and 600 seconds

> 150°C

> 217°C

Peak temperature

between 240 and 500 seconds

between 30 and 150 seconds

max. 260°C

Time within 5°C of actual peak temperature

Cool-down rate (Peak to 50°C)

Time from 30°C to Peak temperature

between 10 and 30 seconds

less than 6°C/second

no greater than 300 seconds

Chip-mount air reflow profile

Temperature / °C

max. 260°C

217°C

Time / s

max. 300 s

10 ... 30 s

30 ... 150 s

VI TELEFILTER

Potsdamer Straße 18

D 14 513 TELTOW / Germany

Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30

E-Mail: tft@telefilter.com

VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is

assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information

Filename: tfs 1200.doc

Version 1.3

09.06.2006

VI TELEFILTER

Filter specification

TFS 1200

5/5

History

Version

1.0

Reason of Changes

- Generation of development specification

Name

Date

Strehl

Sabah

13.06.2005

06.07.2005

1.1

- Change of input power level to +15dBm

1.2

- Add of typical values and typical filter performances

1.3

- Improve limit line scheme

- Change filter characteristic

Noack

09.06.2006

VI TELEFILTER

Potsdamer Straße 18

D 14 513 TELTOW / Germany

Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30

E-Mail: tft@telefilter.com

Filter Specification

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-

VECTRON