TFS160F [VECTRON]

Filter specification; 过滤器规格
TFS160F
型号: TFS160F
厂家: Vectron International, Inc    Vectron International, Inc
描述:

Filter specification
过滤器规格

过滤器 LTE
文件: 总5页 (文件大小:188K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Filename: tfs 160f.doc  
Version 1.1  
20.10.2005  
VI TELEFILTER  
Filter specification  
TFS 160F  
1/5  
Measurement condition  
Ambient temperature:  
Input power level:  
Terminating impedance: *  
Input:  
25  
0
°C  
dBm  
82 || -28 pF  
82 || -22 pF  
Output:  
Characteristics  
Remark:  
The reference level for the relative attenuation a of the TFS 160F is the minimum of the pass band attenuation a  
. The minimum of the pass band  
min  
rel  
attenuation a  
is defined as the insertion loss a . The centre frequency f is the arithmetic mean value of the upper and lower frequencies at the 3 dB  
min  
e c  
filter attenuation level relative to the insertion loss a . The nominal frequency f is fixed at MHz without any tolerance. The given values for both the  
relative attenuation a and the group delay ripple have to be achieved at the frequencies given below even if the centre frequency f is shifted due to the  
temperature coefficient of frequency TC in the operating temperature range and due to a production tolerance for the centre frequency f .  
e
N
rel  
c
f
c
D a t a  
typ. value  
tolerance / limit  
a
17,3  
dB  
max.  
19,0  
dB  
Insertion loss  
(reference level)  
e
fN  
-
160,0  
-
160,0  
MHz  
kHz  
Nominal frequency  
Centre frequency  
Passband  
fC **  
BW  
MHz  
dB  
max.  
fN  
± 150  
PB  
± 4,375 MHz  
0,5  
max.  
1
dB  
Pass band ripple (p-p)  
Bandwidth  
1
3
40  
dB  
dB  
dB  
9,19  
9,65  
11,33  
MHz  
MHz  
MHz  
min.  
min.  
max.  
8,8  
9,4  
MHz  
MHz  
11,75 MHz  
a
Relative attenuation  
rel  
fC  
fC  
fC  
fC  
fC  
±
±
-
4,40 MHz  
4,70 MHz  
5,88 MHz  
0,5  
2
43  
48  
dB  
dB  
dB  
dB  
max.  
max.  
min.  
min.  
1
3
40  
40  
dB  
dB  
dB  
dB  
fC  
fC  
fC  
±
-
+
4,40 MHz  
140,00 MHz  
5,88 MHz  
+
200,00 MHz  
70  
ns  
max.  
200  
ns  
Group delay ripple within PB (p-p)  
OTR  
-
-
- 25 °C ... + 80°C  
Operating temperature range  
Storage temperature range  
- 40 °C ... + 85°C  
-
TC ***  
-18  
ppm/K  
Temperature coefficient of frequency  
f
*) The terminating impedances depend on parasitics and q-values of matching elements and the board used, and are to be understood as reference  
values only. Should there be additional questions do not hesitate to ask for an application note or contact our design team.  
**) at ambient temperature  
***) f (Hz) = Tcf(ppm/K) x (T - TA) x fCAT (MHz)  
c
Generated:  
Checked / Approved:  
Tele Filter GmbH  
Potsdamer Straße 18  
D 14 513 TELTOW / Germany  
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30  
E-Mail: tft@telefilter.com  
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is  
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.  
Filename: tfs 160f.doc  
Version 1.1  
20.10.2005  
VI TELEFILTER  
Filter specification  
TFS 160F  
2/5  
Filter characteristic  
0
0
-1  
2.79  
2.64  
2.49  
2.34  
2.19  
2.04  
1.89  
1.74  
1.59  
1.44  
-7  
-14  
-21  
-28  
-35  
-42  
-49  
-56  
-63  
-70  
-2  
-3  
-4  
-5  
-6  
-7  
-8  
-9  
-10  
1.29  
165  
135.7  
140.56  
145.42  
150.28  
155.14  
160  
164.86  
169.72  
174.58  
179.44  
184.3  
155  
156  
157  
158  
159  
160  
161  
162  
163  
164  
frequency in MHz  
frequency in MHz  
Construction and pin connection  
(All dimensions in mm)  
13,6Max.  
1
2
3
4
Ground  
Ground  
Ground  
Ground  
Output  
5
6
7
Output RF Return  
Ground  
TFS 160F  
8
9
10  
11  
12  
Ground  
Ground  
Ground  
Input  
T43  
1
Input RF Return  
Date code  
2,54 ±0,15  
1,5  
Date code: Year + week  
T
2005  
2006  
2007  
2
1
3 4  
U
V
...  
12  
11  
5
6
9 8  
10  
7
0,1  
0,8  
50 Ohm Test circuit  
L2  
11  
12  
5
6
L1  
SAW  
C1  
C2  
1, 2, 3, 4, 7, 8, 9, 10  
Tele Filter GmbH  
Potsdamer Straße 18  
D 14 513 TELTOW / Germany  
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30  
E-Mail: tft@telefilter.com  
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is  
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.  
Filename: tfs 160f.doc  
Version 1.1  
20.10.2005  
VI TELEFILTER  
Filter specification  
TFS 160F  
3/5  
Stability characteristics  
After the following tests the filter shall meet the whole specification:  
1. Shock:  
500g, 1 ms, half sine wave, 3 shocks each plane;  
DIN IEC 68 T2 - 27  
2. Vibration:  
10 Hz to 500 Hz, 0,35 mm or 5 g respectively, 1 octave per min, 10 cycles per plan, 3 plans;  
DIN IEC 68 T2 - 6  
3. Change of  
temperature:  
-55 °C to 125°C / 30 min. each / 10 cycles  
DIN IEC 68 part 2 – 14 Test N  
4. Resistance to  
solder heat (reflow):  
reflow possible: twice max.;  
for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4;  
Packing  
Tape & Reel:  
IEC 286 – 3, with exeption of value for N and minimum bending radius;  
tape type II, embossed carrier tape with top cover tape on the upper side;  
max. pieces of filters peer reel:  
reel of empty components at start:  
reel of empty components at start including leader:  
trailer:  
1700  
min. 300 mm  
min. 500 mm  
min. 300 mm  
Pull Off Direction  
P1  
P2  
Tape (all dimensions in mm)  
Date Code  
W
: 24,00 +0,30/-0,10  
Po  
t
Do  
Po  
Do  
E
:
:
:
4,00 ± 0,1  
1,50 +0,1/-0  
1,75 ± 0,10  
F
: 11,50 ± 0,10  
G(min)  
P2  
:
:
0,60  
2,00 ± 0,1  
P1  
: 12,00 ± 0,1  
D1(min)  
Ao  
:
:
1,50  
7,10 ± 0,10  
Ko  
Typ  
PIN Marker  
D1  
Ao  
Bo  
Ct  
: 13,90 ± 0,10  
: 21,5 ± 0,1  
W
2
Reel (all dimensions in mm)  
A
:330  
W1  
: 24,4 +2/-0  
W2(max) : 30,4  
N(min)  
C
: 60  
: 13,0 +0,5/-0,2  
C
A
N
W
1
The minimum bending radius is 45 mm.  
Tele Filter GmbH  
Potsdamer Straße 18  
D 14 513 TELTOW / Germany  
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30  
E-Mail: tft@telefilter.com  
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is  
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.  
Filename: tfs 160f.doc  
Version 1.1  
20.10.2005  
VI TELEFILTER  
Filter specification  
TFS 160F  
4/5  
Air reflow temperature conditions  
Conditions  
Exposure  
Average ramp-up rate (30°C to 217°C)  
> 100°C  
less than 3°C/second  
between 300 and 600 seconds  
> 150°C  
> 217°C  
Peak temperature  
between 240 and 500 seconds  
between 30 and 150 seconds  
max. 260°C  
Time within 5°C of actual peak temperature  
Cool-down rate (Peak to 50°C)  
Time from 30°C to Peak temperature  
between 10 and 30 seconds  
less than 6°C/second  
no greater than 300 seconds  
Chip-mount air reflow profile  
Temperature / °C  
max. 260°C  
217°C  
Time / s  
max. 300 s  
10 ... 30 s  
30 ... 150 s  
Tele Filter GmbH  
Potsdamer Straße 18  
D 14 513 TELTOW / Germany  
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30  
E-Mail: tft@telefilter.com  
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is  
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.  
Filename: tfs 160f.doc  
Version 1.1  
20.10.2005  
VI TELEFILTER  
Filter specification  
TFS 160F  
5/5  
History  
Version  
1.0  
Reason of changes  
- Generation of development specification  
- terminating impedance, typical values and matching configuration added  
Name  
Date  
Strehl  
24.05.2005  
20.10.2005  
1.1  
Pfeiffer  
Tele Filter GmbH  
Potsdamer Straße 18  
D 14 513 TELTOW / Germany  
Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30  
E-Mail: tft@telefilter.com  
VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is  
assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.  

相关型号:

TFS160G

Filter specification
VECTRON

TFS160N-3.3

Analog Circuit
MORNSUN

TFS161A

Specification
VECTRON

TFS161A_06

Filter specification
VECTRON

TFS162A

Filter specification
VECTRON

TFS163A

Filter specification
VECTRON

TFS167

Filter Specification
VECTRON

TFS167D

Filter Specification
VECTRON

TFS167E

Filter Specification
VECTRON

TFS167F

Filter specification
VECTRON

TFS167G

Filter specification
VECTRON

TFS167H

Filter specification
VECTRON