TFS810A [VECTRON]

Filter specification; 过滤器规格


型号：	TFS810A
厂家：	Vectron International, Inc
描述：	Filter specification 过滤器规格过滤器 LTE
文件：	总5页 (文件大小：167K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Filename: tfs 810a.doc

Version 1.2

10.03.2005

VI TELEFILTER

Filter specification

TFS 810A

1/5

Measurement condition

Ambient temperature:

Input power level:

Terminating impedance: *

Input:

°C

dBm

1260 Ω || -1,4 pF

1230 Ω || -1,4 pF

Output:

Characteristics

Remark:

The minimum attenuation in the pass band is defined as the insertion loss a . The nominal frequency

_Nis fixed at 810 MHz without any tolerance or limit.

The values of relative attenuation a

are guaranteed for the whole operating temperature range. The frequency shift of the filter in the operating

rel

temperature range is included in the production tolerance scheme.

tolerance scheme.

D a t a

typ. value

tolerance / limit

Insertion loss

12,5

max.

810

Nominal frequency

Centre frequency

f_N

MHz

f_C

810

MHz

Passband

f_N

1,5

MHz

Pass band ripple

1 dB Bandwidth

Relative attenuation

0,5

9,5

max.

min.

BW_1dB

MHz

rel

600

745

801

817

819

875

MHz

…

745

801

803

819

875

1000

MHz

min.

MHz

Group delay ripple within PB

max.

150

Operating temperature range

Storage temperature range

Turn over temperature

OTR

- 40 °C ... + 85

°C

Temperature coefficient of frequency

TC **

-0,036 ppm/K²

*) The terminating impedances depend on parasitics and q-values of matching elements and the board used, and are to be understood as reference values

only. Should there be additional questions do not hesitate to ask for an application note or contact our design team.

**) ∆f(Hz) = TC (ppm/K²) x (T-T₀)²x f (MHz)

Generated:

Checked / Approved:

Tele Filter GmbH

Potsdamer Straße 18

D 14 513 TELTOW / Germany

Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30

E-Mail: tft@telefilter.com

VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is

assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.

Filename: tfs 810a.doc

Version 1.2

10.03.2005

VI TELEFILTER

Filter specification

TFS 810A

2/5

Filter characteristic

-1

1.35

1.23

1.11

0.99

0.87

0.75

0.63

0.51

0.39

0.27

0.15

-8

-16

-24

-32

-40

-48

-56

-64

-72

-80

-2

-3

-4

-5

-6

-7

-8

-9

-10

685

710

735

760

785

810

835

860

885

910

935

804 805.2 806.4 807.6 808.8 810 811.2 812.4 813.6 814.8 816

frequency in MHz

Construction and pin connection

(All dimensions in mm)

Input

Ground

Output

Ground

810A

● T10

Date code

2,54

Date code: Year + week

2005

2006

2007

...

1,78

200 Ω Test circuit

SAW

3, 4, 7, 8

Tele Filter GmbH

Potsdamer Straße 18

D 14 513 TELTOW / Germany

Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30

E-Mail: tft@telefilter.com

VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is

assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.

Filename: tfs 810a.doc

Version 1.2

10.03.2005

VI TELEFILTER

Filter specification

TFS 810A

3/5

Stability characteristics

After the following tests the filter shall meet the whole specification:

1. Shock:

500g, 1 ms, half sine wave, 3 shocks each plane;

DIN IEC 68 T2 - 27

2. Vibration:

10 Hz to 500 Hz, 0,35 mm or 5 g respectively, 1 octave per min, 10 cycles per plan, 3 plans;

DIN IEC 68 T2 - 6

3. Change of

temperature:

-55 °C to 125°C / 30 min. each / 10 cycles

DIN IEC 68 part 2 – 14 Test N

4. Resistance to

solder heat (reflow):

reflow possible: twice max.;

for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4;

Packing

Tape & Reel:

IEC 286 – 3, with exeption of value for N and minimum bending radius;

tape type II, embossed carrier tape with top cover tape on the upper side;

max. pieces of filters peer reel:

reel of empty components at start:

reel of empty components at start including leader:

trailer:

3000

min. 300 mm

min. 500 mm

min. 300 mm

Pull Off Direction

Tape (all dimensions in mm)

Date Code

: 12,00 ± 0,3

G(min)

D1(min)

4,00 ± 0,1

1,50 +0,1/-0

1,75 ± 0,1

5,50 ± 0,05

0,75

2,00 ± 0,05

8,00 ± 0,1

1,50

Typ

PIN Marker

4,30 ± 0,1

9,5 ± 0,1

Reel (all dimensions in mm)

:330

: 12,4 +2/-0

W2(max) : 18,4

N(min)

: 50

: 13,0 +0,5/-0,2

The minimum bending radius is 45 mm.

Tele Filter GmbH

Potsdamer Straße 18

D 14 513 TELTOW / Germany

Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30

E-Mail: tft@telefilter.com

VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is

assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.

Filename: tfs 810a.doc

Version 1.2

10.03.2005

VI TELEFILTER

Filter specification

TFS 810A

4/5

Air reflow temperature conditions

Conditions

Exposure

Average ramp-up rate (30°C to 217°C)

> 100°C

less than 3°C/second

between 300 and 600 seconds

> 150°C

> 217°C

Peak temperature

between 240 and 500 seconds

between 30 and 150 seconds

max. 260°C

Time within 5°C of actual peak temperature

Cool-down rate (Peak to 50°C)

Time from 30°C to Peak temperature

between 10 and 30 seconds

less than 6°C/second

no greater than 300 seconds

Chip-mount air reflow profile

Temperature / °C

max. 260°C

217°C

Time / s

max. 300 s

10 ... 30 s

30 ... 150 s

Tele Filter GmbH

Potsdamer Straße 18

D 14 513 TELTOW / Germany

Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30

E-Mail: tft@telefilter.com

VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is

assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.

Filename: tfs 810a.doc

Version 1.2

10.03.2005

VI TELEFILTER

Filter specification

TFS 810A

5/5

History

Version

1.0

Reason of Changes

- Generation of development specification

Name

Date

Martens

1.12.2004

1.1

- terminating impedance (preliminary values), typical values and filter characteristic added

- matching configuration added

Pfeiffer

14.02.2005

- stability conditions for shock test corrected

1.2

- terminating impedances, typical values and filter characteristic changed

Pfeiffer

10.03.2005

Tele Filter GmbH

Potsdamer Straße 18

D 14 513 TELTOW / Germany

Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30

E-Mail: tft@telefilter.com

Filter specification

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-

VECTRON