VS-701-1-D-E-X [VECTRON]
Voltage Controlled SAW Oscillator;型号: | VS-701-1-D-E-X |
厂家: | Vectron International, Inc |
描述: | Voltage Controlled SAW Oscillator |
文件: | 总6页 (文件大小:652K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
VS-701
Voltage Controlled SAW Oscillator
VS-701
Description
The VS-701 VCSO (Voltage Controlled Saw Oscillator) from Vectron is a high frequency, ultra low phase noise oscillator designed
to support high speed data converters and 100G / 400G coherent optical receivers. The VS-701 provides 13fs rms jitter in a 12kHz
to 20MHz integration bandwidth and is available from 0.6 to 3.0GHz.
Features
Applications
•
•
•
•
•
•
•
•
Frequency Range 0.6 to 3.0 GHz
Ultra low jitter performance
Typical Jitter: 13fsec rms, 12kHz to 20MHz
3.3 + 5V supply voltage
•
•
•
•
High Speed ADCs
100G & 400G Coherent Receivers
Test & Measurement
Military
Output: Sinewave & LVPECL
5x7 mm SMD package
20.000G shock survival
See table on Page 5 for standard frequencies
Performance Specifications
Pulling Characteristics
Parameter
Min
20
Typ
Max
Units
ppm
Notes
Absolute Pull Range (APR)
Includes df vs:
•Operating temperature range +10 .. 85°C
•Aging 10 years
•Supply Voltage Change 5%
•Load change 10%
Tuning Slope
Positive
Control Voltage Range
0.5
0
2.5
4.5
V DC
VDC
kΩ
with VS = 5V
with VS = 3.3V
1.65
3.3
Frequency control input
impedance
100
Modulation bandwidth
20
kHz
@ -3dB
Supply Voltage (Vs)
Supply voltage (standard)
Current consumption
4.75
3.135
5.00
5.25
50
V DC
mA
@ sinewave
Supply voltage (standard)
3.3
3.465
V DC
Current consumption
75
95
mA
mA
@ sinewave
@ LVPECL
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
1 of 6
Performance Specifications (Continued)
RF Output
Parameter
Min
Typ
Max
Units
Notes
Signal
Sinewave
Package G352
Load
45
50
55
Ω
Output Power
4
7
10
dBm
Signal
LVPECL
Package G356
Load
45
45
50
55
55
Ω
Duty Cycle
%
Phase Noise: 100Hz offset
Phase Noise: 1kHz offset
Phase Noise: 10kHz offset
Phase Noise: 100kHz offset
Phase Noise: 1MHz offset
Phase Noise: 10MHz offset
Jitter: 12kHz to 20MHz offset
-63
-93
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
fs rms
-124
-143
-158
-163
13
@ 1.265GHz
Sinewave
3.3V
Additional Parameters
Parameter
Weight
Min
Min
Max
Units
Notes
Notes
1.0g
Subharmonics
-20
dBc
> 1.2 GHz
Processing and Packing
Handling and Processing Note
Absolute Maximum Ratings
Parameter
Max
6.0
Units
Supply Voltage (VS)
V
Operable Temperature Range
Storage Temperature Range
-40
-40
+85
+95
ꢀC
ꢀC
Environmental Conditions
Rapid Temperature Changes
MIL-883-1010 Cond B 500 cycles -55/125C
Vibration
MIL-STD-883 Meth 2007 Cond A: 20g 20-2000Hz 4x in each 3axis 4 min sweep time
MIL-STD-883G Meth 2002.4 Cond. D: 5000g 0,3ms 6 shocks in each direction
MIL-STD-883G Meth 2002.4 Cond. E: 20000g 0,2ms 1 shock
Shock
J-STD-002C Cond A, leaded Cond. B SMD (MIL-STD-883 M 2003); 245°C
Dip&Look with 8h damp pre-treatment
Solderability
Solvent Resistance
ESD
MIL-STD-883 Meth 2015 Solv. 1,3,4
JESD22-A114F Class 1; 10* 800V
Level 1 JESD22-A113-B
Moisture Sensitivity
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
2 of 6
Typical Performance
Phase Noise
VS-701 @ 1.265GHz Sinewave
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
3 of 6
Outline Drawing / Enclosure
Dimensions in mm
Package Codes
Code
G352
G356
Height “H”
2.5
Pin Length “L”
N/A
2.5
N/A
Pin Assignment Sinewave (G352)
Control Voltage (VC)
GND
Pin Assignment LVPECL (G356)
1
2
3
4
1
2
3
4
5
6
Control Voltage (VC)
Enable
RF-Out
GND
Supply Voltage Input (VS)
RF-Out
RF-Out_complementary
Supply Voltage Input (VS)
Marking
VS-701-xxxx
Frequency
•AYYWW
Enable true table (optional)
LVPECL
Pin 2
High
Open
Low
Pin 4
Data
Pin 5
Compl. Data
Compl. Data
No Data
Data
No Data
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
4 of 6
Standard Shipping Method
Enclosure Type
G352 / G356
Tape Width W (mm)
Quantity per meter
Quantity per reel
Dimension P (mm)
24
750
12
Recommended Reflow Profile
Profile Feature
Pb-Free Assembly/Sn-Pb
Profile Feature
Pb-Free Assembly/Sn-Pb
Assembly
Assembly
Average ramp-up rate (TL to TP)
3°C/second max.
Time 25°C to Peak Temperature
8 minutes max.
Preheat - Temperature Min TSmin
-Temperature Min TSma
150°C
200°C
60-180 seconds
Time maintained above
-Temperature (TL)
-Time (tL)
217°C
60-150 seconds
-Time (min to max) tS
TSmax to TL -Ramp-up Rate
3°C/second max
Time maintained above
-Temperature (TL)
-Time (tL)
Time within 5°C of actual Peak-
20-40 seconds
217°C
60-150 seconds
Temperature (tP)
Peak Temperature (TP)
max 260°C
Ramp-down Rate
6°C/ second max
Note: All temperatures refer to topside of the package, measured on the package body surface.
SMD oscillators must be on the top side of the PCB during the reflow process.
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
5 of 6
Ordering Information
VS - 701 0 - D E X - 205 X - 1000M0
Frequency
Product Family
VS: VCSO
Enable
X: No Enable (Sinewave)
1: Enable (LVPECL)
Package
5x7 mm SMT
Height
0: 2.5mm (G352: Sinewave)
1: 2.5mm (G356: LVPECL)
APR Code
205: ±20ppm
Supply Voltage
D: +5.0V
E: +3.3V
Temperature Range
X: +10°C to +85°C
E: - 40°C to +85°C
RF Output Code
C: LVPECL
E: Sinewave
Standard Frequencies (MHz)
632.8125
784.489605
1000
832
867.1875
1034.337568
1687.5
873.5154185
949.976022
1067.686799
1707.08
980.604559
1200
993.4096915
1265.625
1024.23965
1568.97921
1748.366885
1968.75
1040
1280
1701.32
1875
1734.375
1884.052863
2068.675135
2812.5
1747.030837
1899.952044
2104.658326
2949.12
1747.62305
1961.209118
2135.373597
1769.145
1986.819383
2400
1879.437686
2048.4793
2560
2000
2187.5
2457.6
Other frequencies and temperature ranges available upon request
Notes:
1. Contact factory for improved stabilities or additional product options. Not all options and codes are available at all
frequencies.
2. Unless other stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency
control voltage, load, temperature (25°C).
3. Phase noise degrades with increasing output frequency.
4. Subject to technical modification.
5. Contact factory for availability.
For Additional Information, Please Contact
USA:
Europe:
Asia:
Microsemi
Vectron International GmbH
Landstrasse, D-74924
Neckarbischofsheim, Germany
Tel: +49 (0) 7268-801-0
Microsemi
267 Lowell Road, Unit 102
Hudson, NH 03051
Tel: 1.888.328.7661
68 Yin Cheng Road(C), 22nd Floor
One LuJiaZui
Pudong, Shanghai 200120, China
Tel: +86 21 6194 6886
Fax: 1.888.329.8328
Fax: +49 (0) 7268-801-281
Fax: +86 21 6194 6699
Disclaimer
Microsemi reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application. No rights
under any patent accompany the sale of any such product(s) or information.
Rev: 01/2018
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
6 of 6
相关型号:
VS-701-1-E-C-E
Voltage Controlled SAW OscillatorWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VECTRON
VS-701-1-E-C-X
Voltage Controlled SAW OscillatorWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VECTRON
VS-701-1-E-E-E
Voltage Controlled SAW OscillatorWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VECTRON
VS-701-1-E-E-X
Voltage Controlled SAW OscillatorWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VECTRON
VS-702-ECE-KE
Voltage Controlled SAW OscillatorWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VECTRON
VS-702-ECE-KEAA-320M000000_SNPBDIP
SAW Oscillator, 320MHz Nom, LCC-6Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MICROSEMI
VS-702-ECE-KEAA-533M000000
SAW Oscillator, 533MHz Nom, LCC-6Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MICROSEMI
VS-702-ECE-KEAA-533M000000_SNPBDIP
SAW Oscillator, 533MHz Nom, LCC-6Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MICROSEMI
VS-702-ECE-KEAN-637M500000
SAW Oscillator,Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MICROSEMI
VS-702-ECE-KECA-324M000000
SAW Oscillator, 324MHz Nom, LCC-6Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MICROSEMI
VS-702-ECE-KECA-324M000000_SNPBDIP
SAW Oscillator, 324MHz Nom, LCC-6Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MICROSEMI
VS-702-ECE-KX
Voltage Controlled SAW OscillatorWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VECTRON
©2020 ICPDF网 联系我们和版权申明