M-FIAM3MS3 [VICOR]

Military 270Vin Filter Input Attenuator Module; 军事270Vin滤波器输入衰减模块


型号：	M-FIAM3MS3
厂家：	VICOR CORPORATION
描述：	Military 270Vin Filter Input Attenuator Module 军事270Vin滤波器输入衰减模块模拟IC 信号电路军事输入元件局域网
文件：	总4页 (文件大小：271K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

M-FIAM3

Military COTS 270Vin Filter

Input Attenuator Module

Features

• EMI filtering-MIL-STD-461E

• Transient protection-MIL-STD-704E/F

• Environments-MIL-STD-810, MIL-STD-202

• Environmental stress screening

• Low profile mounting options

• Output current up to 3 Amps

• Mini sized package

Shown actual size:

2.28 x 2.2 x 0.5 in

• Inrush current limiting

57,9 x 55,9 x 12,7 mm

Product Highlights

The M-FIAM3 is a DC front-end module

that provides EMI filtering and transient

protection. The M-FIAM3 enables designers

using Vicor 2nd Generation 300V DC-DC

converters to meet conducted emission/

conducted susceptibility per MIL-STD-461E;

and input transients per MIL-STD-704E/F.

The M-FIAM3 accepts an input voltage of

180-375Vdc and delivers output current up

to 3 Amps.

Absolute Maximum Rating

Parameter

+In to –In

Rating

375

Unit

Vdc

in-lbs

°F (°C)

°C

Notes

Continuous

100ms

6 each, #4-40 or M3

<5 sec; wave solder

<7 sec; hand solder

Baseplate

+In to –In

400

Mounting torque

5 (0.57)

Pin Soldering temperature

Operating temperature H–Grade

Storage temperature H–Grade

Operating temperature M–Grade

Storage temperature M–Grade

500 (260)

750 (390)

-40 to +100

-55 to +125

-55 to +100

-65 to +125

Baseplate

M-FIAM3 is housed in an industry

standard "half brick" module measuring

2.28" x 2.2" x 0.5" and depending upon

model selected, may be mounted on-board

or in-board for height critical applications.

Specifications

(typical at TBP = 25ºC, nominal line, 75% load, unless otherwise specified)

Parameter

Input voltage

Output current

Inrush limiting

Transient immunity

EMI:MIL-STD-461E

Conducted emissions:

Min

180Vdc

Typ

270Vdc

Max

375Vdc

Remarks

Continuous

Compatible Products

• 2nd Generation 300V Input

DC-DC converters

0.018A/µF

Exceeds limits of MIL-STD-704E/F

CE101, CE102

Conducted susceptibility: CS101, CS114, CS115, CS116

Part Number Format

Dielectric withstand

1,500Vrms

2,121Vdc

98%

Input/Output to base

Efficiency

96%

M-FIAM3 M 2 1

Internal voltage drop

ON/OFF control

Enable (ON)

3.0Vdc

5.0Vdc

@ 3A, 100°C baseplate

Product

0.0Vdc

3.5Vdc

1.0Vdc

5.0Vdc

Referenced to –Vout.

100kΩ internal pull-up resistor

See illustration C1 on page 3.

400V

Ounces (grams)

Years

Disable (OFF)

External capacitance

Product Grade(°C)

H = –40 to +100

M = –55 to +100

Pin Style

1 = Short

2 = Long

*S=Short ModuMate

*N=Long ModuMate

Baseplate

1 = Slotted

2 = Threaded

3 = Thru-hole

10µF

22µF

Weight

Warranty

3.3 (94)

*Compatible with SurfMate and InMate socketing systems.

MTBF per MIL-HDBK-217F (M-FIAM3M21)

Thermal Resistance

Parameter

Baseplate to sink; flat, greased surface

Baseplate to sink; thermal pad (P/N 20264) 0.1°C/Watt

Baseplate to ambient

Typ

0.16°C/Watt

Temp.

25°C

50°C

65°C

Environment

MTBF

4,031

725

Unit

1,000 Hrs

Ground benign:G.B.

Naval sheltered:N.S.

Airborne inhabited cargo:A.I.C.

1,000

568

Hrs

7.9°C/Watt

2.2°C/Watt

Baseplate to sink; 1000 LFM

Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715

MFIAM3

Rev. 1.8

Page 1 of 4

Set your site on VICOR at www.vicorpower.com

Environmental Qualification

Environmental Stress Screening

H Grade

M Grade

Altitude

Operating Temp.

Storage Temp.

-40°C to +100°C

-55°C to +125°C

12 cycles

-55°C to +100°C

-65°C to +125°C

12 cycles

MIL-STD-810C, Method 500.2, Procedure I & II, 40,000 ft. and

70,000 ft. Operational.

Temp. Cycling:*

-65°C to +100°C

Explosive Atmosphere

MIL-STD-810F, Method 511.4, Procedure I, Operational.

Ambient Test

@ 25°C

Yes

Power Cycling

Burn-In:

12 hours,

28 cycles

24 hours,

56 cycles

Vibration

MIL-STD-810F, Method 514.5, Procedure I, Category 14, Sine

and Random vibration per Table 514.5C for Helicopter AH-6J

Main Rotor with overall level of 5.6 grams for 4 hours per axis.

MIL-STD-810F, Method 514.5C, General Minimum Integrity

Curve per Figure 514.5C-17 with overall level of 7.7 grams

for 1 hour per axis.

Functional and

Parametric

ATE Tests:

Hi-Pot Test

Visual Inspection:

Test Data

-40°C and

+100°C

-55°C and

+100°C

Yes

vicorpower.com

Shock

*Temperature cycled with power off, 17°C per minute rate of change.

MIL-STD-810-F, Method 516.5, Procedure I, Functional Shock,40 G's.

MIL-S-901D, Lightweight Hammer Shock, 3 impacts/axis, 1,3,5 ft.

MIL-STD-202F, Method 213B, 60 G's, 9ms half sine.

MIL-STD-202F, Method 213B, 75 G's, 11ms Saw Tooth Shock.

Conducted Noise

Acceleration

MIL-STD-810F, Method 513.5, Procedure II, table 513.5-II,

Operational, 2-7 G's, 6 directions.

Humidity

MIL-STD-810F, Method 507.4, Procedure I, Cycle I, 240 hrs, 95% RH.

Solder Test

MIL-STD-202F, Method 208, 8 hour aging.

Figure 1– M-FIAM3 and Model V300A48M500AL

DC-DC converter operating at 180Vdc, 130W.

Inrush Limiting

Transient Immunity

Output

Input

Figure 3– Inrush Limiting: Inrush current with 22µF external

Figure 2 – Transient Immunity: M-FIAM3 output response to

capacitance.

an input transient.

Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715

MFIAM3

Rev. 1.8

Page 2 of 4

Set your site on VICOR at www.vicorpower.com

Transient and Surge Protection

Note: The M-FIAM3 is shown in the on state. To disable,

open the connection between ON/OFF and –Out.

Capacitance (C1)

10µF(min),22µF(max)

Recommended Fuse:

3A Max., F03A Type

–IN

–

–OUT

–S

–IN

OFF

EMI

GND

2nd Generation

300Vdc Input

DC-DC Converters

MOV P/N

03040

M-FIAM3 ^NC

+IN

+OUT

+IN

Mechanical Diagram

Module Pins

0.50 ±0.02

12,7 ±0,5

No.

Function

Label

+In

Connection

2.20

55,9

1.74

44,2

0.01

0.23

5,8

(REF)

Ground

–In

EMI/GND

2.000

50,80

0.10

2,5

style 2 & 3

baseplates only

(4X)***

0.49

12,4

0.12* 0.20**

3,1 5,1

0.300 ±0.015

7,62 ±0,38

–

0.10

X 45˚

2,5

CHAMFER

–Out

ON/OFF

0.35

8,8

0.300 ±0.015

7,62 ±0,38

(2X)

0.65

16,5

FULL R (6X)

Connection

2.28

57,9

1.900

48,26

1.30

33,0

ALUMINUM

BASEPLATE

0.130

(6X)

3,30

Connection

Use a 4-40 Screw (6X)

Torque to:

+Out

0.150

DIA,(2X)

0.43

10,9

0.06

1,5

3,81

0.080

2,03

5 in-lbs

.57 N-m

(3X)

2.20

55,9

0.400

10,16

DIA,(7X)

0.54

(9X)

13,7

(REF.)

0.700

17,78

1.000

25,40

1.400

35,56

Short Pin

Long Pin

0.62

(9X)

15,7

Slotted (Style 1)

Threaded (Style 2)

4-40 UNC-2B (6X)

Thru Hole (Style 3)

#30 Drill Thru (6X)

(0.1285)

Style 1 baseplate only

** Style 2 & 3 baseplates

*** Reserved for Vicor accessories

Not for mounting

PCB Mounting Specifications

INBOARD

SOLDER

MOUNT

ONBOARD

SOLDER

MOUNT

ies

ALL MARKINGS

THIS SURFACE

SHORT PIN STYLE

LONG PIN STYLE

0.062 ±0.010

0.094 ±0.003

2,39 ±0,08

PCB THICKNESS

(7X)

1,57 ±0,25

2,39 ±0,08

PLATED

THRU HOLE

DIA

0.164 ±0.003

4,16 ±0,08

0.164 ±0.003

4,16 ±0,08

(2X)

1.790

45,47

0.06

1,5

(4X)

0.158

4,01

ALUMINUM

BASEPLATE

PINS STYLES

1.584*

40,23

1.900*

48.,26

SOLDER:TIN/LEAD

HOT SOLDER DIPPED

MODUMATE: GOLD PLATED COPPER

0.400*

0.43

10,9

0.53

13,5

10,16

0.700*

17,78

1.000*

25,40

* DENOTES

±0.003

0.195

4,95

1.400*

35,56

TOL =

±0,08

Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715

MFIAM3

Rev. 1.8

Page 3 of 4

Set your site on VICOR at www.vicorpower.com

Vicor’s comprehensive line of power solutions includes high density AC-DC

and DC-DC modules and accessory components, fully configurable AC-DC

and DC-DC power supplies, and complete custom power systems.

Information furnished by Vicor is believed to be accurate and reliable. However, no responsibility is

assumed by Vicor for its use. Vicor components are not designed to be used in applications, such as life

support systems, wherein a failure or malfunction could result in injury or death. All sales are subject to

Vicor’s Terms and Conditions of Sale, which are available upon request.

Specifications are subject to change without notice.

Component Solutions

for Your Power System

Vicor Corporation

25 Frontage Road

Andover, MA, USA 01810

Tel: 800-735-6200

978-470-2900

Fax: 978-475-6715

Vicor Express: vicorexp@vicr.com

Technical Support: apps@vicr.com

Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715

FARM, Filter/Autoranging Rectifier Module

Rev. 1.8

06/05

Set your site on VICOR at www.vicorpower.com

相关型号：