M-FIAM5BH21 [VICOR]
Military COTS28 Vin Filter Input Attenuator Module; 军事COTS28输入电压滤波输入衰减模块型号: | M-FIAM5BH21 |
厂家: | VICOR CORPORATION |
描述: | Military COTS28 Vin Filter Input Attenuator Module |
文件: | 总4页 (文件大小:239K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
M-FIAM5
Factorized Power
Military COTS 28 Vin Filter
Input Attenuator Module
Features
Model Number: M-FIAM5BM21*
• EMI filtering-MIL-STD-461E
• Transient protection-MIL-STD-704E/F
• Environments-MIL-STD-810, MIL-STD-202
• Environmental stress screening
• Low profile mounting options
• Output current up to 20 Amps
• Mini sized package
Shown actual size:
2.28 x 2.2 x 0.5 in
57,9 x 55,9 x 12,7 mm
• Inrush current limiting
• Reverse polarity protection
Product Highlights
Absolute Maximum Rating
The M-FIAM5 is a DC front-end module
that provides EMI filtering and transient
protection. The M-FIAM5 enables designers
using Vicor 2nd Generation 24 V DC-DC
converters to meet conducted emission/
conducted susceptibility per MIL-STD-461E;
and input transients per MIL-STD-704E/F.
The M-FIAM5 accepts an input voltage of
18-36 Vdc and delivers output current up to
20 Amps.
Parameter
+In to –In
+In to –In
Mounting torque
Pin soldering temperature
Pin soldering temperature
Operating temperature H–Grade
Storage temperature H–Grade
Operating temperature M–Grade
Storage temperature M–Grade
Rating
36
50
5 (0.57)
500 (260)
750 (390)
-40 to +100
-55 to +125
-55 to +100
-65 to +125
Unit
Vdc
Vdc
in-lbs
°F(°C)
°F(°C)
°C
°C
°C
°C
Notes
Continuous
See Fig.1
6 each, #4-40 or M3
<5 sec; wave solder
<7 sec; hand solder
Baseplate
Baseplate
M-FIAM5 is housed in an industry
standard "half brick" module measuring
2.28" x 2.2" x 0.5" and depending upon
model selected, may be mounted onboard
or inboard for height critical applications.
Specifications
(typical at TBP = 25ºC, nominal line, 75% load, unless otherwise specified)
Parameter
Input voltage
Output current
Inrush limiting
Transient immunity
Min
18 Vdc
Typ
28 Vdc
Max
36 Vdc
20 A
Remarks
Continuous
Compatible Products
• 2nd Generation 24 V Input
DC-DC converters
0.007 A/µF
50 Vdc
12.5 mS per MIL-STD-704E/F,
continuous operation
EMI:MIL-STD-461E
Conducted emissions:
CE101, CE102
Conducted susceptibility: CS101, CS114, CS115, CS116
*Part Number Format
Dielectric withstand
1,500 Vrms
2,121 Vdc
98%
Input/Output to Base
Input/Output to Base
M-FIAM5B M 2 1
Efficiency
96%
Internal voltage drop
ON/OFF control
Enable (ON)
0.5
0.7
@20 A, 100°C baseplate
0.0 Vdc
3.5 Vdc
1.0 Vdc
5.0 Vdc
Referenced to –Vout
100 kΩ internal pull-up resistor
See illustration C1 on page 3
50 V
Ounces (grams)
Years
Pin Style
Disable (OFF)
Product Grade(°C)
H = –40 to +100
M = –55 to +100
1 = Short
2 = Long
*S=Short ModuMate
*N=Long ModuMate
Baseplate
1 = Slotted
2 = Threaded
3 = Thru hole
External capacitance
330µF
1000 µF
2
Weight
Warranty
3.3 (94)
*Compatible with SurfMate and InMate socketing system.
MTBF per MIL-HDBK-217F (M-FIAM5BM21)
Thermal Resistance
Temp
25°C
50°C
65°C
Environment
MTBF
2,581
464
Unit
Parameter
Baseplate to sink; flat, greased surface
Baseplate to sink; thermal pad (P/N 20264) 0.1°C/Watt
Baseplate to ambient
Typ
0.16°C/Watt
Ground Benign: G.B.
Naval Sheltered: N.S.
Airborne Inhabited Cargo: A.I.C.
1,000 Hrs
1,000 Hrs
1,000 Hrs
364
7.9°C/Watt
2.2°C/Watt
Baseplate to ambient; 1000 LFM
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
MFIAM5
Rev. 2.3
Page 1 of 4
Set your site on VICOR at www.vicorpower.com
Environmental Qualification
Altitude
MIL-STD-810C, Method 500.2, Procedure I & II, 40,000 ft. and 70,000 ft. Operational.
Explosive Atmosphere
MIL-STD-810F, Method 511.4, Procedure I, Operational.
Vibration
MIL-STD-810F, Method 514.5, Procedure I, Category 14, Sine and Random vibration per Table 514.5C for Helicopter AH-6J Main Rotor with overall
level of 5.6 grams for 4 hours per axis. MIL-STD-810F, Method 514.5C, General Minimum Integrity Curve per Figure 514.5C-17 with overall level of
7.7 grams for 1 hour per axis.
Shock
MIL-STD-810-F, Method 516.5, Procedure I, Functional Shock,40 G's. MIL-S-901D, Lightweight Hammer Shock, 3 impacts/axis, 1,3,5 ft.
MIL-STD-202F, Method 213B, 60 G's, 9ms half sine. MIL-STD-202F, Method 213B, 75 G's, 11ms Saw Tooth Shock.
Acceleration
MIL-STD-810F, Method 513.5, Procedure II, table 513.5-II, Operational, 2-7 G's, 6 directions.
Humidity
MIL-STD-810F, Method 507.4, Procedure I, Cycle I, 240 hrs, 95% RH.
Solder Test
MIL-STD-202F, Method 208, 8 hour aging.
Shut Down Time vs. Overvoltage
Conducted Noise
Figure 1– T = Time period before over-voltage protection
Figure 2– M-FIAM5 and Model V24A12M400A DC-DC
Vin = Input voltage (switching up from 28 V)
converter operating at 28 Vdc, 400 W.
Inrush Limiting
Transient Immunity
INPUT VOLTAGE
50 V
OUTPUT
VOLTAGE
INPUT CURRENT
Figure 4– Inrush Limiting: Inrush current with 1000 µF
Figure 3 – Transient Immunity: M-FIAM5 output response to
external capacitance.
an input transient.
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
MFIAM5
Rev. 2.3
Page 2 of 4
Set your site on VICOR at www.vicorpower.com
Environmental Stress Screening
Transient and Surge Protection
H Grade
M Grade
Operating temp.
Storage temp.
-40°C to +100°C
-55°C to +125°C
12 cycles
-55°C to +100°C
-65°C to +125°C
12 cycles
Note: The M-FIAM5 is shown in the on state. To disable,
open the connection between ON/OFF and –Out.
Temp. cycling:*
–IN
–
–
–OUT
–S
–IN
PR
ON
OFF
-65°C to +100°C
-65°C to +100°C
EMI
GND
2nd Generation
24Vdc Input
MOV P/N
20461-068
C1
C1
SC
NC
NC
Ambient test
@ 25°C
M-FIAM5
PC
DC-DC Converters
NC
+S
Yes
Yes
+
+
+IN
+OUT
+IN
Power cycling
Burn-In:
12 hours,
28 cycles
24 hours,
56 cycles
Functional and
parametric
ATE tests:
Hi-Pot test
Visual inspection:
Test data
-40°C and
+100°C
-55°C and
+100°C
Capacitance (C1)
330 µF(min),1000 µF(max)
Recommended Fuse:
Yes
Yes
Yes
Yes
20 A Max., F03 A Type
vicorpower.com
vicorpower.com
*Temperature cycled with power off, 17°C per minute rate of change.
Mechanical Diagram
Module Pins
0.50 ±0.02
12,7 ±0,5
No.
Function
Label
1
+In
+
No
Connection
2
NC
2.20
55,9
1.74
44,2
0.01
3
4
5
6
Ground
–In
EMI/GND
0.23
5,8
(REF)
2.000
50,80
0.10
2,5
style 2 & 3
baseplates only
(4X)***
–
–
0.49
12,4
0.12* 0.20**
3,1 5,1
0.300 ±0.015
7,62 ±0,38
–Out
0.10
2,5
CHAMFER
X 45˚
ON/OFF
ON/OFF
1
9
2
8
3
6
4
5
0.35
8,8
0.300 ±0.015
7,62 ±0,38
(2X)
No
Connection
0.65
16,5
FULL R (6X)
7
NC
2.28
57,9
1.900
48,26
1.30
33,0
ALUMINUM
BASEPLATE
No
Connection
0.130
(6X)
3,30
8
9
NC
+
7
+Out
Use a 4-40 Screw (6X)
Torque to:
0.150
DIA,(2X)
0.43
10,9
0.06
1,5
3,81
0.080
2,03
5 in-lbs
.57 N-m
R
(3X)
2.20
55,9
(REF.)
0.400
10,16
DIA,(7X)
0.54
(9X)
13,7
0.700
17,78
1.000
25,40
1.400
35,56
Short Pin
Long Pin
0.62
(9X)
15,7
Slotted (Style 1)
or
Threaded (Style 2)
4-40 UNC-2B (6X)
or
Thru Hole (Style 3)
#30 Drill Thru (6X)
(0.1285)
*
Style 1 baseplate only
** Style 2 & 3 baseplates
*** Reserved for Vicor accessories
Not for mounting
PCB Mounting Specifications
INBOARD
SOLDER
MOUNT
ONBOARD
SOLDER
MOUNT
ALL MARKINGS
THIS SURFACE
SHORT PIN STYLE
LONG PIN STYLE
0.062 ±0.010
PCB THICKNESS
0.094 ±0.003
0.094 ±0.003
2,39 ±0,08
(7X)
1,57 ±0,25
2,39 ±0,08
PLATED
THRU HOLE
DIA
0.164 ±0.003
4,16 ±0,08
0.164 ±0.003
4,16 ±0,08
(2X)
1.790
45,47
0.06
R
(4X)
0.158
4,01
1,5
ALUMINUM
BASEPLATE
1
2
3
4
PINS STYLES
1.584*
40,23
1.900*
48.,26
SOLDER:TIN/LEAD
HOT SOLDER DIPPED
MODUMATE: GOLD PLATED COPPER
9
8
7
6
5
0.400*
0.43
10,9
0.53
13,5
10,16
0.700*
17,78
1.000*
25,40
* DENOTES
±0.003
0.195
4,95
1.400*
35,56
TOL =
±0,08
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
MFIAM5
Rev. 2.3
Page 3 of 4
Set your site on VICOR at www.vicorpower.com
Vicor’s comprehensive line of power solutions includes high density AC-DC
and DC-DC modules and accessory components, fully configurable AC-DC
and DC-DC power supplies, and complete custom power systems.
Information furnished by Vicor is believed to be accurate and reliable. However, no responsibility is
assumed by Vicor for its use. Vicor components are not designed to be used in applications, such as life
support systems, wherein a failure or malfunction could result in injury or death. All sales are subject to
Vicor’s Terms and Conditions of Sale, which are available upon request.
Specifications are subject to change without notice.
Component Solutions
Factorized Power
for Your Power System
Vicor Corporation
25 Frontage Road
Andover, MA, USA 01810
Tel: 800-735-6200
978-470-2900
Fax: 978-475-6715
email
Vicor Express: vicorexp@vicr.com
Technical Support: apps@vicr.com
Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715
MFIAM5
Rev. 2.3
06/05
Set your site on VICOR at vicorpower.com
相关型号:
©2020 ICPDF网 联系我们和版权申明