M-FIAM5BH23 [VICOR]

Military COTS28 Vin Filter Input Attenuator Module; 军事COTS28输入电压滤波输入衰减模块


型号：	M-FIAM5BH23
厂家：	VICOR CORPORATION
描述：	Military COTS28 Vin Filter Input Attenuator Module 军事COTS28输入电压滤波输入衰减模块模拟IC 信号电路军事
文件：	总4页 (文件大小：239K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

M-FIAM5

Factorized Power

Military COTS 28 Vin Filter

Input Attenuator Module

Features

Model Number: M-FIAM5BM21*

• EMI filtering-MIL-STD-461E

• Transient protection-MIL-STD-704E/F

• Environments-MIL-STD-810, MIL-STD-202

• Environmental stress screening

• Low profile mounting options

• Output current up to 20 Amps

• Mini sized package

Shown actual size:

2.28 x 2.2 x 0.5 in

57,9 x 55,9 x 12,7 mm

• Inrush current limiting

• Reverse polarity protection

Product Highlights

Absolute Maximum Rating

The M-FIAM5 is a DC front-end module

that provides EMI filtering and transient

protection. The M-FIAM5 enables designers

using Vicor 2nd Generation 24 V DC-DC

converters to meet conducted emission/

conducted susceptibility per MIL-STD-461E;

and input transients per MIL-STD-704E/F.

The M-FIAM5 accepts an input voltage of

18-36 Vdc and delivers output current up to

20 Amps.

Parameter

+In to –In

Mounting torque

Pin soldering temperature

Operating temperature H–Grade

Storage temperature H–Grade

Operating temperature M–Grade

Storage temperature M–Grade

Rating

5 (0.57)

500 (260)

750 (390)

-40 to +100

-55 to +125

-55 to +100

-65 to +125

Unit

Vdc

in-lbs

°F(°C)

°C

Notes

Continuous

See Fig.1

6 each, #4-40 or M3

<5 sec; wave solder

<7 sec; hand solder

Baseplate

M-FIAM5 is housed in an industry

standard "half brick" module measuring

2.28" x 2.2" x 0.5" and depending upon

model selected, may be mounted onboard

or inboard for height critical applications.

Specifications

(typical at TBP = 25ºC, nominal line, 75% load, unless otherwise specified)

Parameter

Input voltage

Output current

Inrush limiting

Transient immunity

Min

18 Vdc

Typ

28 Vdc

Max

36 Vdc

20 A

Remarks

Continuous

Compatible Products

• 2nd Generation 24 V Input

DC-DC converters

0.007 A/µF

50 Vdc

12.5 mS per MIL-STD-704E/F,

continuous operation

EMI:MIL-STD-461E

Conducted emissions:

CE101, CE102

Conducted susceptibility: CS101, CS114, CS115, CS116

*Part Number Format

Dielectric withstand

1,500 Vrms

2,121 Vdc

98%

Input/Output to Base

M-FIAM5B M 2 1

Efficiency

96%

Internal voltage drop

ON/OFF control

Enable (ON)

0.5

0.7

@20 A, 100°C baseplate

0.0 Vdc

3.5 Vdc

1.0 Vdc

5.0 Vdc

Referenced to –Vout

100 kΩ internal pull-up resistor

See illustration C1 on page 3

50 V

Ounces (grams)

Years

Pin Style

Disable (OFF)

Product Grade(°C)

H = –40 to +100

M = –55 to +100

1 = Short

2 = Long

*S=Short ModuMate

*N=Long ModuMate

Baseplate

1 = Slotted

2 = Threaded

3 = Thru hole

External capacitance

330µF

1000 µF

Weight

Warranty

3.3 (94)

*Compatible with SurfMate and InMate socketing system.

MTBF per MIL-HDBK-217F (M-FIAM5BM21)

Thermal Resistance

Temp

25°C

50°C

65°C

Environment

MTBF

2,581

464

Unit

Parameter

Baseplate to sink; flat, greased surface

Baseplate to sink; thermal pad (P/N 20264) 0.1°C/Watt

Baseplate to ambient

Typ

0.16°C/Watt

Ground Benign: G.B.

Naval Sheltered: N.S.

Airborne Inhabited Cargo: A.I.C.

1,000 Hrs

364

7.9°C/Watt

2.2°C/Watt

Baseplate to ambient; 1000 LFM

Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715

MFIAM5

Rev. 2.3

Page 1 of 4

Set your site on VICOR at www.vicorpower.com

Environmental Qualification

Altitude

MIL-STD-810C, Method 500.2, Procedure I & II, 40,000 ft. and 70,000 ft. Operational.

Explosive Atmosphere

MIL-STD-810F, Method 511.4, Procedure I, Operational.

Vibration

MIL-STD-810F, Method 514.5, Procedure I, Category 14, Sine and Random vibration per Table 514.5C for Helicopter AH-6J Main Rotor with overall

level of 5.6 grams for 4 hours per axis. MIL-STD-810F, Method 514.5C, General Minimum Integrity Curve per Figure 514.5C-17 with overall level of

7.7 grams for 1 hour per axis.

Shock

MIL-STD-810-F, Method 516.5, Procedure I, Functional Shock,40 G's. MIL-S-901D, Lightweight Hammer Shock, 3 impacts/axis, 1,3,5 ft.

MIL-STD-202F, Method 213B, 60 G's, 9ms half sine. MIL-STD-202F, Method 213B, 75 G's, 11ms Saw Tooth Shock.

Acceleration

MIL-STD-810F, Method 513.5, Procedure II, table 513.5-II, Operational, 2-7 G's, 6 directions.

Humidity

MIL-STD-810F, Method 507.4, Procedure I, Cycle I, 240 hrs, 95% RH.

Solder Test

MIL-STD-202F, Method 208, 8 hour aging.

Shut Down Time vs. Overvoltage

Conducted Noise

Figure 1– T = Time period before over-voltage protection

Figure 2– M-FIAM5 and Model V24A12M400A DC-DC

Vin = Input voltage (switching up from 28 V)

converter operating at 28 Vdc, 400 W.

Inrush Limiting

Transient Immunity

INPUT VOLTAGE

50 V

OUTPUT

VOLTAGE

INPUT CURRENT

Figure 4– Inrush Limiting: Inrush current with 1000 µF

Figure 3 – Transient Immunity: M-FIAM5 output response to

external capacitance.

an input transient.

Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715

MFIAM5

Rev. 2.3

Page 2 of 4

Set your site on VICOR at www.vicorpower.com

Environmental Stress Screening

Transient and Surge Protection

H Grade

M Grade

Operating temp.

Storage temp.

-40°C to +100°C

-55°C to +125°C

12 cycles

-55°C to +100°C

-65°C to +125°C

12 cycles

Note: The M-FIAM5 is shown in the on state. To disable,

open the connection between ON/OFF and –Out.

Temp. cycling:*

–IN

–

–OUT

–S

–IN

OFF

-65°C to +100°C

EMI

GND

2nd Generation

24Vdc Input

MOV P/N

20461-068

Ambient test

@ 25°C

M-FIAM5

DC-DC Converters

Yes

+IN

+OUT

+IN

Power cycling

Burn-In:

12 hours,

28 cycles

24 hours,

56 cycles

Functional and

parametric

ATE tests:

Hi-Pot test

Visual inspection:

Test data

-40°C and

+100°C

-55°C and

+100°C

Capacitance (C1)

330 µF(min),1000 µF(max)

Recommended Fuse:

Yes

20 A Max., F03 A Type

vicorpower.com

*Temperature cycled with power off, 17°C per minute rate of change.

Mechanical Diagram

Module Pins

0.50 ±0.02

12,7 ±0,5

No.

Function

Label

+In

Connection

2.20

55,9

1.74

44,2

0.01

Ground

–In

EMI/GND

0.23

5,8

(REF)

2.000

50,80

0.10

2,5

style 2 & 3

baseplates only

(4X)***

–

0.49

12,4

0.12* 0.20**

3,1 5,1

0.300 ±0.015

7,62 ±0,38

–Out

0.10

2,5

CHAMFER

X 45˚

ON/OFF

0.35

8,8

0.300 ±0.015

7,62 ±0,38

(2X)

Connection

0.65

16,5

FULL R (6X)

2.28

57,9

1.900

48,26

1.30

33,0

ALUMINUM

BASEPLATE

Connection

0.130

(6X)

3,30

+Out

Use a 4-40 Screw (6X)

Torque to:

0.150

DIA,(2X)

0.43

10,9

0.06

1,5

3,81

0.080

2,03

5 in-lbs

.57 N-m

(3X)

2.20

55,9

(REF.)

0.400

10,16

DIA,(7X)

0.54

(9X)

13,7

0.700

17,78

1.000

25,40

1.400

35,56

Short Pin

Long Pin

0.62

(9X)

15,7

Slotted (Style 1)

Threaded (Style 2)

4-40 UNC-2B (6X)

Thru Hole (Style 3)

#30 Drill Thru (6X)

(0.1285)

Style 1 baseplate only

** Style 2 & 3 baseplates

*** Reserved for Vicor accessories

Not for mounting

PCB Mounting Specifications

INBOARD

SOLDER

MOUNT

ONBOARD

SOLDER

MOUNT

ALL MARKINGS

THIS SURFACE

SHORT PIN STYLE

LONG PIN STYLE

0.062 ±0.010

PCB THICKNESS

0.094 ±0.003

2,39 ±0,08

(7X)

1,57 ±0,25

2,39 ±0,08

PLATED

THRU HOLE

DIA

0.164 ±0.003

4,16 ±0,08

0.164 ±0.003

4,16 ±0,08

(2X)

1.790

45,47

0.06

(4X)

0.158

4,01

1,5

ALUMINUM

BASEPLATE

PINS STYLES

1.584*

40,23

1.900*

48.,26

SOLDER:TIN/LEAD

HOT SOLDER DIPPED

MODUMATE: GOLD PLATED COPPER

0.400*

0.43

10,9

0.53

13,5

10,16

0.700*

17,78

1.000*

25,40

* DENOTES

±0.003

0.195

4,95

1.400*

35,56

TOL =

±0,08

Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715

MFIAM5

Rev. 2.3

Page 3 of 4

Set your site on VICOR at www.vicorpower.com

Vicor’s comprehensive line of power solutions includes high density AC-DC

and DC-DC modules and accessory components, fully configurable AC-DC

and DC-DC power supplies, and complete custom power systems.

Information furnished by Vicor is believed to be accurate and reliable. However, no responsibility is

assumed by Vicor for its use. Vicor components are not designed to be used in applications, such as life

support systems, wherein a failure or malfunction could result in injury or death. All sales are subject to

Vicor’s Terms and Conditions of Sale, which are available upon request.

Specifications are subject to change without notice.

Component Solutions

Factorized Power

for Your Power System

Vicor Corporation

25 Frontage Road

Andover, MA, USA 01810

Tel: 800-735-6200

978-470-2900

Fax: 978-475-6715

Vicor Express: vicorexp@vicr.com

Technical Support: apps@vicr.com

Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715

MFIAM5

Rev. 2.3

06/05

Set your site on VICOR at vicorpower.com

相关型号：