MI-222MV-F4 [VICOR]

1-OUTPUT DC-DC REG PWR SUPPLY MODULE, MODULE-9;


型号：	MI-222MV-F4
厂家：	VICOR CORPORATION
描述：	1-OUTPUT DC-DC REG PWR SUPPLY MODULE, MODULE-9 局域网输出元件
文件：	总6页 (文件大小：141K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Data Sheet

MI-200

Features

• Inputs:

28 Vdc per MIL-STD-704D/E/F

155 Vdc per MIL-STD-1399A

270 Vdc per MIL-STD-704D/E/F

• Single output: 2 – 48 Vdc

DC-DC Converters

50 to 100 Watts

• Up to 23 W/in

• MIL-STD-810 environments

• Up to 90% efficiency

• Remote sense

• Current limit

• OVP and thermal shutdown

• Power boosters for higher power outputs

• ZCS power architecture

• Low noise FM control

• Size: 4.6" x 2.4" x 0.5"

(116,8 x 61,0 x 12,7 mm)

Converter Selection Chart

MI-2

Semi-custom driver and booster modules available, consult factory.

Input Voltage

Nominal

2 = 28 V

5 = 155 V

6 = 270 V

7 = 165 V

Range

Transient^[a]

60 V

Notes

18 – 50 V ^[b]

100 – 210 V

125 – 400 V ^[c]

100 – 310 V

28 Vdc input per MIL-STD 704D/E/F

155 Vdc input per MIL-STD-1399A

270 Vdc input per MIL-STD-704D/E/F

Product Highlights

The MI-200 family of DC-DC converters is

designed for applications utilizing distributed

power architectures. Based on Vicor’s VI-200 /

VI-J00 family of zero-current switching,

component level DC-DC converters, the MI-200

family offers exceptional performance in terms of

power density, efficiency, noise, ease of use, and

reliability.

230 V

475 V

n/a

[a]

Transient voltage for 1 second

16 V operation at 75% load

[b]

[c]

MI-26Z-xV, MI-26Y-xV rated at 75% load from 125 – 150 VIN

Fully encapsulated in Vicor’s industry standard

package, the MI-Series meets MIL-STD-810

environmental requirements for humidity, fungus,

salt-fog, explosive atmosphere, acceleration,

vibration, and shock.

Output Voltage

Product Grade Temperature (°C)

Operating

Storage

1 = 12 V

Z = 2.0 V

Y = 3.3 V

0 = 5.0 V

X = 5.2 V

W = 5.5 V

V = 5.8 V

T = 6.5 V^[d]

R = 7.5 V^[d]

M = 10 V

I = –40 to +85

M = –55 to +85

I = –55 to +100

M = –65 to +100

P = 13.8 V

2 = 15 V

N = 18.5 V

3 = 24 V

L = 28 V

J = 36 V

K = 40 V

4 = 48 V

Overtemperature shutdown 95°C typical

(recycle power to restart)

Standard features such as wide output trim-

ming/programming, current limiting, remote

sense, output inhibit, and latching OVP and OTP

combine to offer the highest degree of protection,

versatility, and reliability for power systems.

Output Power/Current VOUT

≥ 5 V

<5 V

Y = 50 W

X = 75 W

W= 100 W

Y = 10 A

X = 15 A

W= 20 A

V = 30 A

Packaging Options

[d] 75 W max power for 28 V input

Standard: Slotted baseplate

V =

—

For additional output power,

100 W and 75 W booster modules available

SlimMod: Flangeless baseplate, option suffix: - S

Example: MI - 2XX - XX - S

Change (MI-2xx-xx) to (MI-Bxx-xx)

FinMod: Finned heat sink, option suffix:

- F1, - F2, -F3 or -F4

Examples:

MI - 2XX - XX -F1, 0.25" fins, longitudinal

MI - 2XX - XX -F2, 0.50" fins, longitudinal

MI - 2XX - XX -F3, 0.25" fins, transverse

MI - 2XX - XX -F4, 0.50" fins, transverse

Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715

MI-200 DC-DC Converters 50 to 100 Watts

Rev. 1.4

Page 1 of 6

Set your site on VICOR at vicorpower.com

CONVERTER SPECIFICATIONS

(typical at T = 25°C, nominal line and 75% load, unless otherwise specified)

INPUT SPECIFICATIONS

Parameter

Min

Typ

Max

Units

Test Conditions

Inrush charge

120x10^-6

200x10^-6

Coulombs

Nominal line

Input reflected

ripple current – pp

10%

Nominal line, full load

VIN

30+20Log

120 Hz, nominal line

2400 Hz, nominal line

(

)

VOUT

Input ripple rejection

VIN

VOUT

20+20Log

No load power dissipation

1.35

Watts

OUTPUT CHARACTERISTICS

Parameter

Min

Typ

Max

Units

VNOM

V^NOM

Test Conditions

Setpoint accuracy

0.5%

0.05%

0.2%

0.01

0.2%

0.5%

0.02

LL to HL, 10% to Full Load

LL to HL, No Load to 10%

Over rated temperature

Load/line regulation

NOM

Output temperature drift

Long term drift

% / °C

0.02

100

%/1K hours

150

Whichever is greater

20 MHz bandwidth

Output ripple – pp

1.0%

1.5%

VNOM

Trim range^[a]

50%

0.5

110%

Total remote

sense compensation

Volts

OVP set point^[b]

Current limit

115%

105%

20%

125%

135%

125%

130%

VNOM

INOM

latching

Automatic restart

Short circuit current ^[c]

[a] 10 V, 12 V and 15 V outputs, standard trim range 10%. Consult factory for wider trim range.

3.3 V output trim range 2.20 to 3.63 V

[b] No over temperature or voltage protection in booster modules

[c] Output voltages of 5 V or less incorporate foldback current limiting; outputs of 10 V and above provide constant current limiting.

CONTROL PIN SPECIFICATIONS

Parameter

Min

Typ

Max

Units

Ohms

Volts

Test Conditions

Gate out impedance

Gate in impedance

Gate in open circuit voltage

Gate in low threshold

Gate in low current

Power sharing accuracy

1000

Use open collector

0.65

0.95

1.05

Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715

MI-200 DC-DC Converters 50 to 100 Watts

Rev. 1.4

Page 2 of 6

Set your site on VICOR at vicorpower.com

CONVERTER SPECIFICATIONS (cont.)

DIELECTRIC WITHSTAND CHARACTERISTICS

Parameter

Min

3,000

500

Typ

Max

Units

VRMS

Test Conditions

Input to output

Baseplate earthed

Output to baseplate

Input to baseplate

Input to output capacitance

1,500

THERMAL CHARACTERISTICS

Parameter

Min

Typ

Max

Units

Test Conditions

Efficiency

80 – 90%

Baseplate to sink

thermal impedance

0.07

°C/Watt

°C

With thermal pads

Thermal shutdown^[

(Drivers only)

Cool and recycle power

to restart

105

[d]

No over temperature or voltage protection in booster modules

ENVIRONMENTAL – MIL-STD-810D

Parameter

Min

70,000

86/240

Typ

Max

Units

Test Conditions

Procedure II

Altitude - method 500.2

Humidity - method 507.2

Acceleration - method 513.3

Vibration - method 514.3

Shock - method 516.3

feet

%/hours

Procedure I, cycle 1

Procedure II

Procedure I, category 6

Procedure I

RELIABILITY - MIL-HDBK-217F (MI-22L-MW)

Parameter

Min

Typ

3,552

639

Max

Units

Test Conditions

25°C Ground Benign: G.B.

50°C Naval Sheltered: N.S.

1,000 hours

65°C Airborne Inhabited

Cargo: A.I.C.

501

1,000 hours

MECHANICAL SPECIFICATIONS

Parameter

Weight

Min

Typ

Max

Units

Test Conditions

7.2

205

7.3

208

7.4

210

Ounces

Grams

Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715

MI-200 DC-DC Converters 50 to 100 Watts

Rev. 1.4

Page 3 of 6

Set your site on VICOR at vicorpower.com

CONVERTER SPECIFICATIONS (cont.)

PRODUCT GRADE SPECIFICATIONS

Parameter

I-Grade

M-Grade

Storage temperature

Operating temperature (baseplate)

Power cycling burn-in

-55°C to +100°C

-40°C to +85°C

12 hours, 29 cycles

-65°C to +100°C

-55°C to +85°C

96 hours, 213 cycles

Temperature cycled with power off

17°C per minute rate of change

12 cycles

-65°C to +100°C

12 cycles

-65°C to +100°C

Test data supplied at these temperatures^[e]

-40°C, +80°C

2 years

-55°C, +80°C

2 years

Warranty

Environmental compliance

Derating

MIL-STD-810

NAVMAT P-4855-1A

MIL-STD-810

NAVMAT P-4855-1A

[e]

Test data available for review or download from vicorpower.com

ENVIRONMENTAL QUALIFICATIONS

Parameter

Qualification

MIL-STD-810D, Method 500.2, Procedure III, explosive decompression (40 K ft.).

Altitude

MIL-STD-810D, Method 500.2, Procedure II, 40,000 ft., 1000 – 1500 ft./min. to 70,000 ft., unit functioning

MIL-STD-810C, Method 511.1, Procedure I

Explosive Atmosphere

MIL-STD-810D, Method 514.3, Procedure I, category 6, helicopter, 20 g

MIL-STD-810D, Method 514.3 random: 10 – 300 Hz @ 0.02 g²/Hz, 2000 Hz @ 0.002 g²/Hz, 3.9 total G rms

3 hrs/axis. Sine: 30 Hz @ 20 g, 60 Hz @ 10 g, 90 Hz @ 6.6 g, 120 Hz @ 5.0 g, 16.0 total G rms, 3 axes

Vibration

Shock

MIL-STD-810E, Method 514.4, Table 514.4-VII, 6 db/octave, 7.7 G rms, 1hr/axis

MIL-STD-810D, Method 516.3, Procedure I, functional shock, 40 g

MIL-STD-202F, Method 213B, 18 pulses, 60 g, 9 msec

MIL-STD-202F, Method 213B, 75 g, 11 ms saw tooth shock

MIL-STD-202F, Method 207A, 3 impacts / axis, 1, 3, 5 feet

Acceleration

Humidity

MIL-STD-810D, Method 513.3, Procedure II Operational test, 9 g for 1 minute along 3 mutually perpendicular axes

MIL-STD-810D, Method 507.2, Procedure I, cycle I, 240 hrs, 88% relative humidity

MIL-STD-202, Method 208, 8 hr. aging

Solder Test

Fungus

MIL-STD-810C, Method 508.1

Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715

MI-200 DC-DC Converters 50 to 100 Watts

Rev. 1.4

Page 4 of 6

Set your site on VICOR at vicorpower.com

MECHANICAL DRAWING

4.60

(116,8)

Standard

0.080 (2,0) Dia (2) places

Solder plate over copper alloy Matte tin over copper alloy

RoHS

3.60

.50

(12,7)

0.080 (2,0) Dia (2) places

(91,4)

1.80

(45,7)

.30 .015

(7,6) (0,38)

Pin # Function

+In

Gate In

Gate Out

-In

+Out

+Sense

Trim

2.10

(53,3)

1.40

VI-200

MI-200

(35,6)

(25,4)

1.00

.70

(17,8)

(10,2)

.40

.35 .015

(8,9) (0,38)

-Sense

-Out

* Do not connect on booster modules

FULL R

.15

(3,8)

Standard

.040 (1,0) Dia (7) places

RoHS

.15

(3,8)

Product ID

this surface

.040 (1,0) Dia (7) places

Solder plate over copper alloy Matte tin over copper alloy

2.40

(61,0)

.30

(7,6) Min

4.20

(106,7)

1.75

.22

(5,6) MIN

Max.

(44,5)

.50

(12,7)

+.030 (0,76)

-.000 (0)

.01

.12

(3,0)

Aluminum Base

Note: For alternate packaging options refer to the mechanical drawing page of vicorpower.com

Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715

MI-200 DC-DC Converters 50 to 100 Watts

Rev. 1.4

Page 5 of 6

Set your site on VICOR at vicorpower.com

Warranty

Vicor products are guaranteed for two years from date of shipment against defects in material or workmanship when in normal

use and service. This warranty does not extend to products subjected to misuse, accident, or improper application or maintenance.

Vicor shall not be liable for collateral or consequential damage. This warranty is extended to the original purchaser only.

EXCEPT FOR THE FOREGOING EXPRESS WARRANTY, VICOR MAKES NO WARRANTY, EXPRESS OR IMPLIED,

INCLUDING, BUT NOT LIMITED TO, THE WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR

PURPOSE.

Vicor will repair or replace defective products in accordance with its own best judgement. For service under this warranty, the

buyer must contact Vicor to obtain a Return Material Authorization (RMA) number and shipping instructions. Products returned

without prior authorization will be returned to the buyer. The buyer will pay all charges incurred in returning the product to the

factory. Vicor will pay all reshipment charges if the product was defective within the terms of this warranty.

Information published by Vicor has been carefully checked and is believed to be accurate; however, no responsibility is assumed

for inaccuracies. Vicor reserves the right to make changes to any products without further notice to improve reliability, function,

or design. Vicor does not assume any liability arising out of the application or use of any product or circuit; neither does it con-

vey any license under its patent rights nor the rights of others. Vicor general policy does not recommend the use of its compo-

nents in life support applications wherein a failure or malfunction may directly threaten life or injury. Per Vicor Terms and

Conditions of Sale, the user of Vicor components in life support applications assumes all risks of such use and indemnifies Vicor

against all damages.

Vicor’s comprehensive line of power solutions includes high density AC-DC

and DC-DC modules and accessory components, fully configurable AC-DC

and DC-DC power supplies, and complete custom power systems.

Information furnished by Vicor is believed to be accurate and reliable. However, no responsibility is assumed by Vicor for its

use. Vicor components are not designed to be used in applications, such as life support systems, wherein a failure or malfunc-

tion could result in injury or death. All sales are subject to Vicor’s Terms and Conditions of Sale, which are available upon

request.

Specifications are subject to change without notice.

Intellectual Property Notice

Vicor and its subsidiaries own Intellectual Property (including issued U.S. and Foreign Patents and pending patent

applications) relating to the products described in this data sheet. Interested parties should contact Vicor's Intellectual

Property Department.

Vicor Corporation

25 Frontage Road

Andover, MA, USA 01810

Tel: 800-735-6200

Fax: 978-475-6715

Customer Service: custserv@vicorpower.com

Technical Support: apps@vicorpower.com

Vicor Corp. Tel: 800-735-6200, 978-470-2900 Fax: 978-475-6715

MI-200 DC-DC Converters 50 to 100 Watts

Rev. 1.4

04/11

Set your site on VICOR at vicorpower.com

MI-222MV-F4 [VICOR]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E