首页 |元器件品牌

1.5KA10A/60 [VISHAY]

Trans Voltage Suppressor Diode, 1500W, 8.55V V(RWM), Unidirectional, 1 Element, Silicon, PLASTIC, CASE 1.5KA, 2 PIN;
1.5KA10A/60
型号： 1.5KA10A/60
厂家： VISHAY    VISHAY
描述：

Trans Voltage Suppressor Diode, 1500W, 8.55V V(RWM), Unidirectional, 1 Element, Silicon, PLASTIC, CASE 1.5KA, 2 PIN
文件： 总5页 (文件大小：73K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
1.5KA6.8 thru 1.5KA47A  
Vishay General Semiconductor  
®
PAR Transient Voltage Suppressors  
High Temperature Stability and High Reliability Conditions  
FEATURES  
• Junction passivation optimized design  
passivated anisotropic rectifier technology  
• T = 185 °C capability suitable for high  
J
reliability and automotive requirement  
• Available in uni-directional polarity only  
• 1500 W peak pulse power capability with a  
10/1000 µs waveform  
• Excellent clamping capability  
• Very fast response time  
Case Style 1.5KA  
• Low incremental surge resistance  
• Solder dip 275 °C max. 10 s, per JESD 22-B106  
• AEC-Q101 qualified  
PRIMARY CHARACTERISTICS  
VBR  
PPPM  
PD  
6.8 V to 47 V  
1500 W  
6.5 W  
• Compliant to RoHS Directive 2002/95/EC and in  
accordance to WEEE 2002/96/EC  
IFSM  
200 A  
TJ max.  
185 °C  
MECHANICAL DATA  
Case: Molded epoxy body over passivated junction  
Molding compound meets UL 94 V-0 flammability  
rating  
TYPICAL APPLICATIONS  
Use in sensitive electronics protection against voltage  
transients induced by inductive load switching and  
lighting on ICs, MOSFET, signal lines of sensor units  
for consumer, computer, industrial, automotive and  
telecommunication.  
Base P/NHE3 - RoHS compliant, AEC-Q101 qualified  
Terminals: Matte tin plated leads, solderable per  
J-STD-002 and JESD 22-B102  
HE3 suffix meets JESD 201 class 2 whisker test  
Polarity: Color band denotes cathode end  
MAXIMUM RATINGS (T = 25 °C unless otherwise noted)  
A
PARAMETER  
SYMBOL  
PPPM  
IPPM  
LIMIT  
1500  
UNIT  
W
Peak pulse power dissipation with a 10/1000 µs waveform (1) (fig. 1)  
Peak pulse current at TA = 25 °C with a 10/1000 µs waveform (1) (fig. 3)  
Power dissipation on infinite heatsink at TL = 75 °C (fig. 5)  
Peak forward surge current 8.3 ms single half sine-wave (2)  
Maximum instantaneous forward voltage at 100 A (2)  
Operating junction and storage temperature range  
See next table  
6.5  
A
PD  
W
IFSM  
200  
A
VF  
3.5  
V
TJ, TSTG  
- 65 to + 185  
°C  
Notes  
(1) Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2  
(2) 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum  
Document Number: 88300  
Revision: 09-Feb-11  
For technical questions within your region, please contact one of the following:  
DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com  
www.vishay.com  
1
1.5KA6.8 thru 1.5KA47A  
Vishay General Semiconductor  
ELECTRICAL CHARACTERISTICS (T = 25 °C unless otherwise noted)  
A
BREAKDOWN  
VOLTAGE  
VBR (1) AT IT  
(V)  
TJ = 150 °C  
PEAK  
PULSE  
CURRENT  
MAXIMUM  
REVERSE  
LEAKAGE  
AT VWM  
MAXIMUM  
CLAMPING  
VOLTAGE  
AT IPPM  
MAXIMUM  
TEMP.  
COEFFICIENT  
OF VBR  
TEST  
STAND-OFF  
MAXIMUM  
REVERSE  
LEAKAGE  
AT VWM  
CURRENT VOLTAGE  
DEVICE TYPE  
IT  
(mA)  
VWM  
(V)  
(2)  
IPPM  
ID (µA)  
VC (V)  
(%/°C)  
MIN.  
MAX.  
(A)  
ID (µA)  
1.5KA6.8  
1.5KA6.8A  
1.5KA7.5  
1.5KA7.5A  
1.5KA8.2  
1.5KA8.2A  
1.5KA9.1  
1.5KA9.1A  
1.5KA10  
6.12  
6.45  
6.75  
7.13  
7.38  
7.79  
8.19  
8.65  
9.00  
9.50  
9.90  
10.5  
10.8  
11.4  
11.7  
12.4  
13.5  
14.3  
14.4  
15.2  
16.2  
17.1  
18.0  
19.0  
19.8  
20.9  
21.6  
22.8  
24.3  
25.7  
27.0  
28.5  
29.7  
31.4  
32.4  
34.2  
35.1  
37.1  
38.7  
40.9  
42.3  
44.7  
7.48  
7.14  
8.25  
7.88  
9.02  
8.61  
10.0  
9.55  
11.0  
10.5  
12.1  
11.6  
13.2  
12.6  
14.3  
13.7  
16.3  
15.8  
17.6  
16.8  
19.8  
18.9  
22.0  
21.0  
24.2  
23.1  
26.4  
25.2  
29.7  
28.4  
33.0  
31.5  
36.3  
34.7  
39.6  
37.8  
42.9  
41.0  
47.3  
45.2  
51.7  
49.4  
10  
10  
5.50  
5.80  
6.05  
6.40  
6.63  
7.02  
7.37  
7.78  
8.10  
8.55  
8.92  
9.40  
9.72  
10.2  
10.5  
11.1  
12.1  
12.8  
12.9  
13.6  
14.5  
15.3  
16.2  
17.1  
17.8  
18.8  
19.4  
20.5  
21.8  
23.1  
24.3  
25.6  
26.8  
28.2  
29.1  
30.8  
31.6  
33.3  
34.8  
36.8  
38.1  
40.2  
1000  
1000  
500  
500  
200  
200  
50  
10 000  
10 000  
5000  
5000  
2000  
2000  
500  
500  
200  
200  
50  
139  
143  
10.8  
10.5  
11.7  
11.3  
12.5  
12.1  
13.8  
13.4  
15.0  
14.5  
16.2  
15.6  
17.3  
16.7  
19.0  
18.2  
22.0  
21.2  
23.5  
22.5  
26.5  
25.2  
29.1  
27.7  
31.9  
30.6  
34.7  
33.2  
39.1  
37.5  
43.5  
41.4  
47.7  
45.7  
52.0  
49.9  
56.4  
53.9  
61.9  
59.3  
67.8  
64.8  
0.057  
0.057  
0.061  
0.061  
0.065  
0.065  
0.068  
0.068  
0.073  
0.073  
0.075  
0.076  
0.076  
0.078  
0.081  
0.081  
0.084  
0.084  
0.086  
0.086  
0.088  
0.088  
0.090  
0.090  
0.092  
0.092  
0.094  
0.094  
0.096  
0.096  
0.097  
0.097  
0.098  
0.098  
0.099  
0.099  
0.100  
0.100  
0.101  
0.101  
0.101  
0.101  
10  
128  
10  
133  
10  
120  
10  
124  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
109  
50  
112  
20  
100  
1.5KA10A  
1.5KA11  
20  
103  
5.0  
5.0  
2.0  
2.0  
2.0  
2.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
92.6  
96.2  
86.7  
89.8  
78.9  
82.4  
68.2  
70.8  
63.8  
66.7  
56.6  
59.5  
51.5  
54.2  
47.0  
49.0  
43.2  
45.2  
38.4  
40.0  
34.5  
36.2  
31.4  
32.8  
28.8  
30.1  
26.6  
27.8  
24.2  
25.3  
22.1  
23.1  
1.5KA11A  
1.5KA12  
50  
10  
1.5KA12A  
1.5KA13  
10  
10  
1.5KA13A  
1.5KA15  
10  
10  
1.5KA15A  
1.5KA16  
10  
10  
1.5KA16A  
1.5KA18  
10  
10  
1.5KA18A  
1.5KA20  
10  
10  
1.5KA20A  
1.5KA22  
10  
10  
1.5KA22A  
1.5KA24  
10  
10  
1.5KA24A  
1.5KA27  
10  
10  
1.5KA27A  
1.5KA30  
10  
10  
1.5KA30A  
1.5KA33  
10  
10  
1.5KA33A  
1.5KA36  
10  
10  
1.5KA36A  
1.5KA39  
10  
10  
1.5KA39A  
1.5KA43  
10  
20  
1.5KA43A  
1.5KA47  
20  
20  
1.5KA47A  
20  
Notes  
(1)  
V
measured after IT applied for 300 µs = square wave pulse or equivalent  
BR  
(2) Surge current waveform per fig. 3 and derate per fig. 2  
(3) All terms and symbols are consistent with ANSI/IEEE C62.35  
www.vishay.com  
2
For technical questions within your region, please contact one of the following:  
DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com  
Document Number: 88300  
Revision: 09-Feb-11  
1.5KA6.8 thru 1.5KA47A  
Vishay General Semiconductor  
ORDERING INFORMATION (Example)  
PREFERRED P/N  
UNIT WEIGHT (g)  
PREFERRED PACKAGE CODE  
BASE QUANTITY  
DELIVERY MODE  
1.5KA6.8AHE3/54 (1)  
0.916  
54  
1400  
13" diameter paper tape and reel  
Note  
(1) AEC-Q101 qualified  
RATINGS AND CHARACTERISTICS CURVES  
(T = 25 C unless otherwise noted)  
A
100  
150  
TJ = 25 °C  
Pulse Width (td)  
Non-Repetitive Pulse  
Waveform shown in Fig. 3  
tr = 10 µs  
is defined as the Point  
where the Peak Current  
decays to 50 % of IPPM  
TA = 25 °C  
Peak Value  
IPPM  
10  
1.0  
0.1  
100  
50  
0
Half Value -  
IPPM  
IPP  
2
10/1000 µs Waveform  
as defined by R.E.A.  
td  
0.1 µs  
1.0 µs  
10 µs  
100 µs  
1.0 ms  
10 ms  
1.0  
3.0  
4.0  
0
2.0  
t - Time (ms)  
td - Pulse Width (s)  
Figure 1. Peak Pulse Power Rating Curve  
Figure 3. Pulse Waveform  
100  
20 000  
10 000  
TJ = 25 °C  
f = 1.0 MHz  
Measured at  
Zero Bias  
Vsig = 50 mVp-p  
75  
50  
1000  
100  
Measured at Stand-Off  
Voltage VWM  
25  
0
25  
50  
75  
150  
175  
200  
0
100  
125  
1.0  
10  
100  
VBR - Breakdown Voltage (V)  
TJ - Initial Temperature (°C)  
Figure 2. Pulse Power or Current vs. Initial Junction Temperature  
Figure 4. Typical Junction Capacitance Unidirectional  
Document Number: 88300  
Revision: 09-Feb-11  
For technical questions within your region, please contact one of the following:  
DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com  
www.vishay.com  
3
1.5KA6.8 thru 1.5KA47A  
Vishay General Semiconductor  
100  
200  
100  
TL = 75 °C  
8.3 ms Single Half Sine-Wave  
60 Hz Resistive  
or Inductive Load  
75  
50  
L = 0.375" (9.5 mm)  
Lead Lengths  
25  
10  
0
1
10  
100  
25  
50  
75  
150 175  
200  
0
100 125  
Number of Cycles at 60 Hz  
TL - Lead Temperature (°C)  
Figure 5. Power Derating Curve  
Figure 6. Maximum Non-Repetitive/Peak Forward Surge Current  
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)  
Case Style 1.5KA  
1.0 (25.4)  
MIN.  
0.210 (5.3)  
0.190 (4.8)  
DIA.  
0.375 (9.5)  
0.285 (7.2)  
1.0 (25.4)  
MIN.  
0.042 (1.07)  
0.038 (0.96)  
DIA.  
www.vishay.com  
4
For technical questions within your region, please contact one of the following:  
DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com  
Document Number: 88300  
Revision: 09-Feb-11  
Legal Disclaimer Notice  
Vishay  
Disclaimer  
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE  
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.  
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,  
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other  
disclosure relating to any product.  
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or  
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all  
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,  
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular  
purpose, non-infringement and merchantability.  
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical  
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements  
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular  
product with the properties described in the product specification is suitable for use in a particular application. Parameters  
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All  
operating parameters, including typical parameters, must be validated for each customer application by the customer’s  
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,  
including but not limited to the warranty expressed therein.  
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining  
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.  
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree  
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and  
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay  
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to  
obtain written terms and conditions regarding products designed for such applications.  
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by  
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.  
Document Number: 91000  
Revision: 11-Mar-11  
www.vishay.com  
1

相关型号：

SI9130DB

 5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

 Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

 500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明