首页 |元器件品牌

131PC470OHMS0.1% [VISHAY]

Fixed Resistor, Wire Wound, 0.125W, 470ohm, 150V, 0.1% +/-Tol, -10,10ppm/Cel;
131PC470OHMS0.1%
型号： 131PC470OHMS0.1%
厂家： VISHAY    VISHAY
描述：

Fixed Resistor, Wire Wound, 0.125W, 470ohm, 150V, 0.1% +/-Tol, -10,10ppm/Cel

固定电阻器
文件： 总3页 (文件大小：810K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
100 SM PC Series  
Powertron  
•ꢀ Resistances to 25MOhms  
•ꢀ Resistance Tolerances to ±0.005%  
•ꢀ TemperatureꢀCoefficientsꢀofꢀ±1ꢀppm/K  
•ꢀ Power Ratings to 2W  
•ꢀ 100%ꢀAcceptanceꢀTestedꢀ/ꢀTraceableꢀtoꢀNIST  
•ꢀ LongꢀTermꢀStabilityꢀ/ꢀ100ppm/year  
•ꢀ MatchedꢀResistanceꢀSetsꢀtoꢀ±0.001%ꢀandꢀ±0.5ꢀppm/K  
SPECIFICATIONS  
Dimensions  
Commercial  
Wattage  
( Watts )  
Minimum  
Tolerance  
( % )  
Maximum  
Working  
Voltage  
Type  
Maximum Ohms  
Diameter  
±0.005”  
Length  
±0.025”  
Lead Diameter1  
±0.002”  
[±0.13mm]  
[±0.64mm]  
[±0.05mm]  
SM-2  
SM-3  
0.06  
0.08  
75k  
0.100 [2.5]  
0.125 [3.2]  
0.210 [5.3]  
0.260 [6.6]  
0.020 [0.5]  
75  
0.020 [0.5]  
0.025 [0.6]  
150k  
100  
SM-4  
SM-13  
SM-5  
SM-6  
139A  
0.10  
0.10  
0.12  
0.15  
0.15  
250k  
250k  
400k  
500k  
500k  
0.125 [3.2]  
0.156 [4.0]  
0.187 [4.7]  
0.187 [4.7]  
0.250 [6.4]  
0.375 [9.5]  
0.312 [7.9]  
0.250 [6.4]  
0.295 [7.5]  
0.250 [6.4]  
0.020 [0.5]  
0.020 [0.5]  
0.025 [0.6]  
0.025 [0.6]  
0.025 [0.6]  
100  
100  
150  
150  
100  
0.025 [0.6]  
0.020 [0.5]  
SM-15  
SM-12  
100  
0.175  
0.20  
0.20  
0.25  
0.25  
750k  
750k  
800k  
1M  
0.187 [4.7]  
0.187 [4.7]  
0.250 [6.4]  
0.210 [5.3]  
0.250 [6.4]  
0.375 [9.5]  
0.450 [11.4]  
0.375 [9.5]  
0.465 [11.8]  
0.500 [12.7]  
200  
200  
200  
250  
300  
0.025 [0.6]  
0.032 [0.8]  
0.025 [0.6]  
0.005  
SM-7  
101  
0.025 [0.6]  
0.032 [0.8]  
0.025 [0.6]  
1.2M  
0.032 [0.8]  
0.025 [0.6]  
102  
0.33  
2.5M  
0.250 [6.4]  
0.750 [19.1]  
400  
120  
121  
129  
106  
107  
108  
0.40  
0.50  
0.75  
1.00  
1.50  
2.00  
3.8M  
3.8M  
10M  
12M  
15M  
25M  
0.375 [9.5]  
0.375 [9.5]  
0.375 [9.5]  
0.500 [12.7]  
0.500 [12.7]  
0.500 [12.7]  
0.500 [12.7]  
0.750 [19.1]  
1.000 [25.4]  
1.000 [25.4]  
1.500 [38.1]  
2.000 [50.8]  
0.032 [0.8]  
0.032 [0.8]  
0.032 [0.8]  
0.032 [0.8]  
0.032 [0.8]  
0.032 [0.8]  
300  
400  
600  
800  
900  
1000  
1 Where more than one lead is listed / the top value is Standard  
Lead Length = 1.50 [38] Min.  
OrderingꢀInformation  
Part Number - Resistance - Tolerance - TCR ( If not standard )  
Example: SM-6 25kOhms 0.1%  
Document Number: 64300  
Revision: 20-09-10  
For technical questions, contact: powertron@vishaypg.com  
www.powertron.de  
1
100 SM PC Series  
Powertron  
SPECIFICATIONS (continued)  
PCꢀSeries  
Dimensions  
Commercial  
Maximum  
Minimum  
Tolerance  
( % )  
Maximum  
Working  
Voltage  
Type  
Wattage  
( Watts )  
1
Diameter  
±0.005”  
[±0.13mm]  
Length  
±0.025”  
[±0.64mm]  
Lead Spacing  
±0.015”  
[±0.4mm]  
Lead Diameter  
±0.002”  
Ohms  
[±0.05mm]  
100PC  
130PC  
131PC  
101PC  
120PC  
0.125  
0.125  
0.125  
0.25  
500k  
500k  
500k  
600k  
800k  
0.250 [6.4]  
0.250 [6.4]  
0.250 [6.4]  
0.250 [6.4]  
0.375 [9.5]  
0.375 [9.5]  
0.312 [7.9]  
0.312 [7.9]  
0.500 [12.7]  
0.500 [12.7]  
0.025 [0.6]  
0.025 [0.6]  
0.025 [0.6]  
0.025 [0.6]  
0.032 [0.8]  
0.150 [3.8]  
0.150 [3.8]  
0.200 [5.1]  
0.150 [3.8]  
0.200 [5.1]  
150  
150  
150  
150  
300  
0.005  
0.40  
0.032 [0.8]  
0.025 [0.6]  
104PC  
0.50  
1M  
0.500 [12.7]  
0.500 [12.7]  
0.300 [7.6]  
400  
1
Where more than one lead is listed / the top value is Standard  
Lead Length = 1.00 [25] Min.  
RectangularꢀSeries  
Dimensions  
Commercial  
Wattage  
( Watts )  
Maximum  
Working  
Voltage  
Maximum  
Ohms  
Type  
Width  
±0.010”  
Height  
±0.025”  
Length  
±0.010”  
Lead Diameter1  
±0.002”  
Lead Spacing  
±0.015”  
[±0.25mm]  
[±0.64mm]  
[±0.25mm]  
[±0.05mm]  
[±0.4mm]  
SM-8  
SM-9  
0.125  
0.250  
0.300  
0.500  
500k  
750k  
500k  
1M  
0.140 [3.6]  
0.150 [3.8]  
0.102 [2.6]  
0.160 [4.1]  
0.250 [6.4]  
0.270 [6.9]  
0.320 [8.1]  
0.525 [13.3]  
0.270 [6.9]  
0.540 [13.7]  
0.300 [7.6]  
0.585 [14.9]  
0.032 [0.8]  
0.032 [0.8]  
0.025 [0.6]  
0.032 [0.8]  
0.125 [3.2]  
0.250 [6.4]  
0.150 [3.8]  
0.400 [10.2]  
150  
150  
150  
150  
SP5086  
SP5232  
1 Lead Length = 1.00 [25] Min.  
Specification  
Value  
Tolerances  
±0.005% to ±1% ( See Derating Curve )  
Temperature Coefficient ( Standard )  
>100W : ±10ppm/K  
10W to100W : ±20ppm/K  
<10W : ±30ppm/K  
( down to 1ppm on request )  
Temperature Range  
-55°C to +145°C ( See Derating Curve )  
Power Derating Curve  
Notes:ꢀ( Contact Factory for these options )  
180  
160  
140  
120  
100  
80  
FastꢀRiseꢀTimeꢀ- These resistors are available in  
a low reactance design for fast rise time and ex-  
tended frequency response.  
Highꢀ Stabilityꢀ - These resistors are available in  
a High Stability version with maximun resistance  
change of ±20ppm/year under normal conditions.  
60  
40  
HighꢀTCꢀ- These resistors are available in High TC  
configurations. Standard TC’s are +2600 / +3850 /  
+4500 / +5000 / and +6000 ppm/K.  
20  
0
0
20  
40  
60  
80  
100  
120  
140  
160  
AmbientꢀTemperatureꢀ°Cꢀ  
www.powertron.de  
2
For technical questions, contact: powertron@vishaypg.com  
Document Number: 64300  
Revision: 20-09-10  
Legal Disclaimer Notice  
Vishay Precision Group  
Disclaimer  
ALL PRODUCTS, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE.  
Vishay Precision Group, Inc., its affiliates, agents, and employees, and all persons acting on its or their  
behalf (collectively, “Vishay Precision Group”), disclaim any and all liability for any errors, inaccuracies or  
incompleteness contained herein or in any other disclosure relating to any product.  
The product specifications do not expand or otherwise modify Vishay Precision Group’s terms and conditions of  
purchase, including but not limited to, the warranty expressed therein.  
Vishay Precision Group makes no warranty, representation or guarantee other than as set forth in the terms  
and conditions of purchase. To the maximum extent permitted by applicable law, Vishay Precision Group  
disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability,  
including without limitation special, consequential or incidental damages, and (iii) any and all implied  
warranties, including warranties of fitness for particular purpose, non-infringement and merchantability.  
Information provided in datasheets and/or specifications may vary from actual results in different applications  
and performance may vary over time. Statements regarding the suitability of products for certain types of  
applications are based on Vishay Precision Group’s knowledge of typical requirements that are often placed on  
Vishay Precision Group products. It is the customer’s responsibility to validate that a particular product with the  
properties described in the product specification is suitable for use in a particular application.  
No license, express, implied, or otherwise, to any intellectual property rights is granted by this document, or by  
any conduct of Vishay Precision Group.  
The products shown herein are not designed for use in life-saving or life-sustaining applications unless otherwise  
expressly indicated. Customers using or selling Vishay Precision Group products not expressly indicated for use  
in such applications do so entirely at their own risk and agree to fully indemnify Vishay Precision Group for any  
damages arising or resulting from such use or sale. Please contact authorized Vishay Precision Group personnel  
to obtain written terms and conditions regarding products designed for such applications.  
Product names and markings noted herein may be trademarks of their respective owners.  
Document No.: 63999  
Revision: 27-Apr-11  
www.vishaypg.com  
1

相关型号：

SI9130DB

 5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

 Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

 500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明