132 [VISHAY]
1 5/16"(33.3mm) Low Cost Indeustrial Single Turn Wirewound, Bushing Mount Type Potentiometer; 1 5/16“ ( 33.3毫米)低成本Indeustrial单圈线绕,衬套安装型电位器型号: | 132 |
厂家: | VISHAY |
描述: | 1 5/16"(33.3mm) Low Cost Indeustrial Single Turn Wirewound, Bushing Mount Type Potentiometer |
文件: | 总3页 (文件大小:75K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Model 132
Vishay Spectrol
www.vishay.com
1 5/16" (33.3 mm) Low Cost Industrial Single Turn
Wirewound, Bushing Mount Type Potentiometer
FEATURES
• Suitable model for all industrial applications
• Center tap available
• Continuous rotation and mechanical stops
both standard
• Large electrical angle: 352° 2°
• Material categorization: For definitions of
compliance please see www.vishay.com/doc?99912
QUICK REFERENCE DATA
Sensor type
ROTATIONAL, single turn wirewound
Output type
Output by turrets
Market appliance
Dimensions
Industrial
1 5/16" (33.3 mm)
ELECTRICAL SPECIFICATIONS
PARAMETER
MIL-PRF-12934 TEST PROCEDURES APPLY
STANDARD
5 to 20 k
3 %
SPECIAL
to 35 k
Total Resistance
Tolerance: 50 and Above
Below 50
1 %
5 %
3 %
Linearity (independent)
Total Resistance
5 to 20
20 to 200
200 and above
Noise
STANDARD
BEST PRACTICAL
1.0 %
1.0 %
0.5 %
0.75 %
0.50 %
0.25 %
100 ENR
40 °C ambient
Power Rating
2.75 W
derated to zero at 125 °C
Electrical Angle
Continuous Rotation
Stops
352° 2°
340° 5°
Insulation Resistance
Dielectric Strength
1000 M minimum at 500 VDC
1000 VRMS, 60 Hz
Absolute Minimum Resistance
Minimum Voltage
1.0 % of total resistance or 0.5 W whichever is greater
0.5 % maximum
Temperature Coefficient of Resistance
Refer to standard resistance element data
MATERIAL SPECIFICATIONS
ENVIRONMENTAL SPECIFICATIONS
Housing
Rear Lid
Shaft
Molded glass filled thermoplastic
Vibration
15 g thru 2000 Hz
Glass filled thermoset plastic
Stainless steel, non-magnetic
Shock
50 g
Salt Spray
48 h
Brass, plated for solderability,
Non-passivated
Rotational Life
Shaft Revolutions
Operating Temperature Range
Terminals
500 000
Mount Hardware
Lockwasher Internal Tooth:
Panel Nut:
- 55 °C to + 125 °C
Steel, nickel plated
Brass, nickel plated
ORDERING INFORMATION/DESCRIPTION
132
B
0
0
20K
BO10
BUSHING
MOUNT
MECHANICAL
OPTIONS
OTHER OPTIONAL
FEATURES
MODEL
OHMIC VALUE
PACKAGING
0. Standard (end taps)
1. Center tap (within
5° of electrical center)
0. Continuous
2. Stops
Box of 10 pieces
Other characteristics will be standard as described on this specification sheet. If special characteristics are required such as special linearity
tolerance, special resistance tolerance, non-linear functions, etc., please state these on your order.
Revision: 12-Apr-13
Document Number: 57096
1
For technical questions, contact: sferprecisionpot@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Model 132
Vishay Spectrol
www.vishay.com
SAP PART NUMBERING GUIDELINES
132
B
2
1
103
B10
MODEL
STYLE
MECHANICAL
OPTIONS
ELECTRICAL
OPTIONS
OHMIC VALUE
PACKAGING
2: With stops
1: With center tap
103: 10K
Box of 10 pieces
DIMENSIONS in inches (millimeters)
0875± ± 0 ꢀ3
MODEL±3ꢀ2B/3ꢀ2-000
± ± 0 35
0625
+± 0
-± 0 2
MTG0±(3 0ꢀ2)
(22022)
ر 04 62
0ꢀ75± ± 0 35
(35088)
0387 ± ± 0 35
(4075)
6 °
0 ꢀ2± ± 0 3
( 083)
(9052)
±± ± 0 35
ر 05
(3207 )
BC
0 62
(3057)
+± 0
-± 0 ꢀ
ر 02497±(60ꢀ4)
0 ꢀ ±MAX0±( 076)
0562±(34027)
± ± 0 35
ر30ꢀ32
(ꢀꢀ0ꢀ2)
0 ꢀ2±( 083)
ꢀ/8±-±ꢀ2±UNEF±-±±2A
ر 0325±(ꢀ038)
2
CW
0 62±(3057)
3
ꢀ
MTG0±SURFACE
TOLERANCES:±UNLESS±OTHERWISE±NOTED0
DECIMALS±± ± 0 5±ANGLES±± ±2°
SCHEMATIC
MECHANICAL SPECIFICATIONS
PARAMETER
Rotation
Bearing Type
360° (continuous) or 340° 5° (stops)
Sleeve
STARTING
1.0 oz. - in (72 g - cm)
RUNNING
0.7 oz.- in (50.40 g - cm)
Torque (maximums)
Runouts (maximums)
Shaft Runout (TIR)
Pilot Dia. Runout (TIR)
Lateral Runout (TIR)
Shaft End Play
0.002" (0.05 mm)
0.003" (0.08 mm)
0.005" (0.13 mm)
0.008" (0.20 mm)
0.003" (0.08 mm)
Shaft Radial Play
Weight
1.0 oz. maximum (28.35 g)
Stop Strength
8.0 in - lbs (9.21 kg - cm) (stops version only)
POWER RATING CHART
RESISTANCE ELEMENT DATA
60
MAXIMUM
MAXIMUM
VOLTAGE
ACROSS
COIL
WIRE
TEMP.
RESISTANCE RESO- OHMS CURRENT
50
40
VALUES
LUTION PER
AT 40 °C
COEF.
(
)
(%)
TURN
AMBIENT
(ppm/°C)
(
mA)
(V)
5
10
20
0.419 0.021
0.327 0.032
0.280 0.056
0.290 0.145
0.251 0.251
0.212 0.424
0.161 0.806
742
524
371
234
166
122
74.2
52.4
37.1
23.4
16.6
12.2
8.88
3.71
5.24
7.42
11.7
16.6
24.4
37.1
52.4
74.2
117
800
800
800
20
20
20
20
20
20
20
ꢀ0
20
30
50
100
200
500
1K
2K
5K
10K
20K
35K
2
4
6
8
3
32
34 ±
AMBIENT±TEMPERATURE±IN±°C
0.150
0.132
0.107
0.080
0.067
0.057
1.50
2.64
5.34
7.98
13.4
20.0
MARKING
Units shall be marked with Vishay Spectrol
name, model number, resistance and
tolerance, linearity, terminal identification, and
data code Applicable test procedures:
MIL-R-12934.
166
244
311
20
20
20
Unit
Identification
Example of a marking for a standard part:
132-0-0-103
Revision: 12-Apr-13
Document Number: 57096
2
For technical questions, contact: sferprecisionpot@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
Document Number: 91000
1
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明