首页 |元器件品牌

150D125X9075B2BE3 [VISHAY]

CAPACITOR, TANTALUM, SOLID, POLARIZED, 75 V, 1.2 uF, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT;
150D125X9075B2BE3
型号： 150D125X9075B2BE3
厂家： VISHAY    VISHAY
描述：

CAPACITOR, TANTALUM, SOLID, POLARIZED, 75 V, 1.2 uF, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT

电容器
文件： 总12页 (文件大小：129K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
150D  
Vishay Sprague  
www.vishay.com  
Solid-Electrolyte TANTALEX™ Capacitors,  
Hermetically-Sealed, Axial-Lead  
FEATURES  
• Terminations: tin / lead (SnPb),  
100 ꢀ tin (RoHS-compliant)  
Available  
Available  
• These high performance, hermetically-sealed  
TANTALEX capacitors have set the standard for  
solid-electrolyte tantalum capacitors for more  
than three decades  
• High capacitance, low DCL, low dissipation factor and  
exceptional operating stability  
• Performance and reliability have been proven in  
commercial, industrial and military applications  
PERFORMANCE CHARACTERISTICS  
Operating Temperature: -55 °C to +125 °C  
(above 85 °C, voltage derating is required)  
• Available in four case codes and capacitors and are  
supplied with plastic-film insulation  
Capacitance Tolerance: at 120 Hz, +25 °C  
20 ꢀ, 10 ꢀ standard. 5 ꢀ available as special  
• Terminals are solid, tinned nickel wire leads  
Dissipation Factor: at 120 Hz, +25 °C  
• The military equivalent of the 150D is the M39003/01 (style  
CSR13) which is qualified to MIL-PRF-39003/1  
DC Leakage Current (DCL Max.):  
at +25 °C: leakage current shall not exceed the values listed  
in the Standard Ratings table  
• Material categorization: for definitions of compliance  
please see www.vishay.com/doc?99912  
at +85 °C: leakage current shall not exceed 10 times the  
values listed in the Standard Ratings table  
Note  
*
This datasheet provides information about parts that are  
RoHS-compliant and / or parts that are non RoHS-compliant. For  
example, parts with lead (Pb) terminations are not RoHS-compliant.  
Please see the information / tables in this datasheet for details  
at +125 °C: leakage shall not exceed 15 times the values  
listed in the Standard Ratings table  
Life Test: capacitors shall withstand rated DC voltage  
applied at +85 °C for 2000 h or derated DC voltage applied  
at +125 °C for 1000 h  
Following the life test:  
1. DCL shall not exceed 125 ꢀ of the initial requirement  
2. Dissipation factor shall meet the initial requirement  
3. Change in capacitance shall not exceed 5 ꢀ  
ORDERING INFORMATION  
150D  
224  
X0  
006  
A
2
T
E3  
MODEL  
CAPACITANCE  
CAPACITANCE DC VOLTAGE RATING  
CASE  
CODE  
STYLE  
NUMBER  
PACKAGING  
RoHS-  
COMPLIANT  
TOLERANCE  
AT 85 °C  
This is expressed  
in picofarads. The  
first two digits are  
the significant  
figures. The third  
is the number of  
zeros to follow.  
X0 = 20 ꢀ  
X9 = 10 ꢀ  
X5 = 5 ꢀ *  
* Special order  
This is expressed in  
volts. To complete the  
three-digit block,  
zeros precede the  
voltage rating.  
See  
Ratings  
and Case  
Codes  
table  
0 = no sleeve  
2 = insulated  
sleeve  
B = bulk  
T = tape  
and reel  
G = ammo  
pack  
E3 = 100 ꢀ tin  
termination  
(RoHS-compliant)  
Blank = SnPb  
termination  
Revision: 16-Nov-17  
Document Number: 40015  
1
For technical questions, contact: tantalum@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
150D  
Vishay Sprague  
www.vishay.com  
DIMENSIONS in inches [millimeters]  
1.500 0.250  
[38.10 6.35]  
1.500 0.250  
[38.10 6.35]  
D
dia.  
L1  
Positive lead  
+
-
0.047 [1.19] max.  
0.125 [3.18] max.  
Solid tinned  
nickel leads  
J
max.  
D
L1  
LEAD SIZE  
J
CASE CODE  
WITH INSULATING SLEEVE (1)  
AWG NO.  
NOMINALDIAMETER  
0.020 [0.51]  
(MAXIMUM)  
A
B
R
S
0.135 0.016 [3.43 0.41] 0.286 0.031 [7.26 0.79] 0.422 [10.720]  
0.185 0.016 [4.70 0.41] 0.474 0.031 [12.04 0.79] 0.610 [15.490]  
0.289 0.016 [7.34 0.41] 0.686 0.031 [17.42 0.79] 0.822 [20.880]  
0.351 0.016 [8.92 0.41] 0.786 0.031 [19.96 0.79] 0.922 [23.420]  
24  
24  
22  
22  
0.020 [0.51]  
0.025 [0.64]  
0.025 [0.64]  
Note  
(1)  
When a shrink-fitted insulation is used, it shall lap over the ends of the capacitor body  
STANDARD RATINGS  
MAX. DF  
AT +25 °C  
120 Hz  
(%)  
MAX. DCL  
AT +25 °C  
(μA)  
CAPACITANCE  
CASE CODE  
PART NUMBER  
(μF)  
6 VDC AT +85 °C, SURGE = 8 V; 4 VDC AT +125 °C, SURGE = 5 V  
0.22  
0.27  
0.33  
0.39  
0.47  
0.56  
0.68  
0.82  
1.0  
1.2  
1.5  
1.8  
2.2  
2.7  
3.3  
3.9  
4.7  
5.6  
6.8  
8.2  
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
B
B
B
B
150D224(1)006A(2)(3)(4)  
150D274(1)006A(2)(3)(4)  
150D334(1)006A(2)(3)(4)  
150D394(1)006A(2)(3)(4)  
150D474(1)006A(2)(3)(4)  
150D564(1)006A(2)(3)(4)  
150D684(1)006A(2)(3)(4)  
150D824(1)006A(2)(3)(4)  
150D105(1)006A(2)(3)(4)  
150D125(1)006A(2)(3)(4)  
150D155(1)006A(2)(3)(4)  
150D185(1)006A(2)(3)(4)  
150D225(1)006A(2)(3)(4)  
150D275(1)006A(2)(3)(4)  
150D335(1)006A(2)(3)(4)  
150D395(1)006A(2)(3)(4)  
150D475(1)006A(2)(3)(4)  
150D565(1)006A(2)(3)(4)  
150D685(1)006A(2)(3)(4)  
150D825(1)006B(2)(3)(4)  
150D106(1)006B(2)(3)(4)  
150D126(1)006B(2)(3)(4)  
150D156(1)006B(2)(3)(4)  
150D186(1)006B(2)(3)(4)  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
1.0  
1.0  
2
2
2
2
2
2
2
2
2
4
4
4
4
4
4
4
4
4
6
6
6
6
6
6
10  
12  
15  
18  
Note  
Part number definitions:  
•
(1) For 10 ꢀ tolerance specify “X9”; for 20 ꢀ specify “X0”; for 5 ꢀ “X5” (special order)  
(2) Style number: 0 = no sleeve, 2 = insulated sleeve  
(3) Packaging options: B = bulk, T = tape and reel, G = ammo pack  
(4) Termination: E3 = 100 ꢀ tin, blank = SnPb  
Revision: 16-Nov-17  
Document Number: 40015  
2
For technical questions, contact: tantalum@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
150D  
Vishay Sprague  
www.vishay.com  
STANDARD RATINGS  
MAX. DF  
AT +25 °C  
120 Hz  
(%)  
MAX. DCL  
AT +25 °C  
(μA)  
CAPACITANCE  
(μF)  
CASE CODE  
PART NUMBER  
6 VDC AT +85 °C, SURGE = 8 V; 4 VDC AT +125 °C, SURGE = 5 V  
22  
27  
B
B
B
B
B
B
R
R
R
R
R
R
S
S
S
150D226(1)006B(2)(3)(4)  
150D276(1)006B(2)(3)(4)  
150D336(1)006B(2)(3)(4)  
150D396(1)006B(2)(3)(4)  
150D476(1)006B(2)(3)(4)  
150D566(1)006B(2)(3)(4)  
150D686(1)006R(2)(3)(4)  
150D826(1)006R(2)(3)(4)  
150D107(1)006R(2)(3)(4)  
150D127(1)006R(2)(3)(4)  
150D157(1)006R(2)(3)(4)  
150D187(1)006R(2)(3)(4)  
150D227(1)006S(2)(3)(4)  
150D277(1)006S(2)(3)(4)  
150D337(1)006S(2)(3)(4)  
1.0  
1.0  
1.0  
1.0  
2.0  
2.0  
3.0  
3.0  
3.0  
3.0  
6.0  
6.0  
6.0  
6.0  
10.0  
6
6
6
6
6
6
6
6
6
6
6
6
8
8
8
33  
39  
47  
56  
68  
82  
100  
120  
150  
180  
220  
270  
330  
10 VDC AT +85 °C, SURGE = 13 V; 7 VDC AT +125 °C, SURGE = 9 V  
0.22  
0.27  
0.33  
0.39  
0.47  
0.56  
0.68  
0.82  
1.0  
1.2  
1.5  
1.8  
2.2  
2.7  
3.3  
3.9  
4.7  
5.6  
6.8  
8.2  
10  
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
B
B
B
B
B
B
B
B
150D224(1)010A(2)(3)(4)  
150D274(1)010A(2)(3)(4)  
150D334(1)010A(2)(3)(4)  
150D394(1)010A(2)(3)(4)  
150D474(1)010A(2)(3)(4)  
150D564(1)010A(2)(3)(4)  
150D684(1)010A(2)(3)(4)  
150D824(1)010A(2)(3)(4)  
150D105(1)010A(2)(3)(4)  
150D125(1)010A(2)(3)(4)  
150D155(1)010A(2)(3)(4)  
150D185(1)010A(2)(3)(4)  
150D225(1)010A(2)(3)(4)  
150D275(1)010A(2)(3)(4)  
150D335(1)010A(2)(3)(4)  
150D395(1)010A(2)(3)(4)  
150D475(1)010A(2)(3)(4)  
150D565(1)010B(2)(3)(4)  
150D685(1)010B(2)(3)(4)  
150D825(1)010B(2)(3)(4)  
150D106(1)010B(2)(3)(4)  
150D126(1)010B(2)(3)(4)  
150D156(1)010B(2)(3)(4)  
150D186(1)010B(2)(3)(4)  
150D226(1)010B(2)(3)(4)  
150D276(1)010B(2)(3)(4)  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
2.0  
2.0  
2
2
2
2
2
2
2
2
2
4
4
4
4
4
4
4
4
4
6
6
6
6
6
6
6
6
12  
15  
18  
22  
27  
Note  
Part number definitions:  
•
(1) For 10 ꢀ tolerance specify “X9”; for 20 ꢀ specify “X0”; for 5 ꢀ “X5” (special order)  
(2) Style number: 0 = no sleeve, 2 = insulated sleeve  
(3) Packaging options: B = bulk, T = tape and reel, G = ammo pack  
(4) Termination: E3 = 100 ꢀ tin, blank = SnPb  
Revision: 16-Nov-17  
Document Number: 40015  
3
For technical questions, contact: tantalum@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
150D  
Vishay Sprague  
www.vishay.com  
STANDARD RATINGS  
MAX. DF  
AT +25 °C  
120 Hz  
(%)  
MAX. DCL  
AT +25 °C  
(μA)  
CAPACITANCE  
(μF)  
CASE CODE  
PART NUMBER  
10 VDC AT +85 °C, SURGE = 13 V; 7 VDC AT +125 °C, SURGE = 9 V  
33  
39  
B
B
R
R
R
R
R
R
S
S
S
150D336(1)010B(2)(3)(4)  
150D396(1)010B(2)(3)(4)  
150D476(1)010R(2)(3)(4)  
150D566(1)010R(2)(3)(4)  
150D686(1)010R(2)(3)(4)  
150D826(1)010R(2)(3)(4)  
150D107(1)010R(2)(3)(4)  
150D127(1)010R(2)(3)(4)  
150D157(1)010S(2)(3)(4)  
150D187(1)010S(2)(3)(4)  
150D227(1)010S(2)(3)(4)  
2.0  
2.0  
6
6
6
6
6
6
6
6
6
6
8
47  
3.0  
56  
3.0  
68  
3.0  
82  
3.0  
100  
120  
150  
180  
220  
6.0  
6.0  
10.0  
10.0  
10.0  
15 VDC AT +85 °C, SURGE = 20 V; 10 VDC AT +125 °C, SURGE = 12 V  
0.22  
0.27  
0.33  
0.39  
0.47  
0.56  
0.68  
0.82  
1.0  
1.2  
1.5  
1.8  
2.2  
2.7  
3.3  
3.9  
4.7  
5.6  
6.8  
8.2  
10  
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
B
B
B
B
B
B
B
B
B
R
R
R
R
R
150D224(1)015A(2)(3)(4)  
150D274(1)015A(2)(3)(4)  
150D334(1)015A(2)(3)(4)  
150D394(1)015A(2)(3)(4)  
150D474(1)015A(2)(3)(4)  
150D564(1)015A(2)(3)(4)  
150D684(1)015A(2)(3)(4)  
150D824(1)015A(2)(3)(4)  
150D105(1)015A(2)(3)(4)  
150D125(1)015A(2)(3)(4)  
150D155(1)015A(2)(3)(4)  
150D185(1)015A(2)(3)(4)  
150D225(1)015A(2)(3)(4)  
150D275(1)015A(2)(3)(4)  
150D335(1)015A(2)(3)(4)  
150D395(1)015B(2)(3)(4)  
150D475(1)015B(2)(3)(4)  
150D565(1)015B(2)(3)(4)  
150D685(1)015B(2)(3)(4)  
150D825(1)015B(2)(3)(4)  
150D106(1)015B(2)(3)(4)  
150D126(1)015B(2)(3)(4)  
150D156(1)015B(2)(3)(4)  
150D186(1)015B(2)(3)(4)  
150D226(1)015B(2)(3)(4)  
150D276(1)015R(2)(3)(4)  
150D336(1)015R(2)(3)(4)  
150D396(1)015R(2)(3)(4)  
150D476(1)015R(2)(3)(4)  
150D566(1)015R(2)(3)(4)  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
2.0  
2.0  
3.0  
3.0  
3.0  
3.0  
6.0  
6.0  
2
2
2
2
2
2
2
2
2
4
4
4
4
4
4
4
4
4
6
6
6
6
6
6
6
6
6
6
6
6
12  
15  
18  
22  
27  
33  
39  
47  
56  
Note  
Part number definitions:  
•
(1) For 10 ꢀ tolerance specify “X9”; for 20 ꢀ specify “X0”; for 5 ꢀ “X5” (special order)  
(2) Style number: 0 = no sleeve, 2 = insulated sleeve  
(3) Packaging options: B = bulk, T = tape and reel, G = ammo pack  
(4) Termination: E3 = 100 ꢀ tin, blank = SnPb  
Revision: 16-Nov-17  
Document Number: 40015  
4
For technical questions, contact: tantalum@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
150D  
Vishay Sprague  
www.vishay.com  
STANDARD RATINGS  
MAX. DF  
AT +25 °C  
120 Hz  
(%)  
MAX. DCL  
AT +25 °C  
(μA)  
CAPACITANCE  
(μF)  
CASE CODE  
PART NUMBER  
15 VDC AT +85 °C, SURGE = 20 V; 10 VDC AT +125 °C, SURGE = 12 V  
68  
82  
R
S
S
S
S
150D686(1)015R(2)(3)(4)  
150D826(1)015S(2)(3)(4)  
150D107(1)015S(2)(3)(4)  
150D127(1)015S(2)(3)(4)  
150D157(1)015S(2)(3)(4)  
6.0  
6.0  
6
6
6
6
6
100  
120  
150  
6.0  
6.0  
10.0  
20 VDC AT +85 °C, SURGE = 26 V; 13 VDC AT +125 °C, SURGE = 16 V  
0.033  
0.039  
0.047  
0.056  
0.068  
0.082  
0.10  
0.12  
0.15  
0.18  
0.22  
0.27  
0.33  
0.39  
0.47  
0.56  
0.68  
0.82  
1.0  
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
B
B
B
B
B
B
B
B
B
R
R
R
150D333(1)020A(2)(3)(4)  
150D393(1)020A(2)(3)(4)  
150D473(1)020A(2)(3)(4)  
150D563(1)020A(2)(3)(4)  
150D683(1)020A(2)(3)(4)  
150D823(1)020A(2)(3)(4)  
150D104(1)020A(2)(3)(4)  
150D124(1)020A(2)(3)(4)  
150D154(1)020A(2)(3)(4)  
150D184(1)020A(2)(3)(4)  
150D224(1)020A(2)(3)(4)  
150D274(1)020A(2)(3)(4)  
150D334(1)020A(2)(3)(4)  
150D394(1)020A(2)(3)(4)  
150D474(1)020A(2)(3)(4)  
150D564(1)020A(2)(3)(4)  
150D684(1)020A(2)(3)(4)  
150D824(1)020A(2)(3)(4)  
150D105(1)020A(2)(3)(4)  
150D125(1)020A(2)(3)(4)  
150D155(1)020A(2)(3)(4)  
150D185(1)020A(2)(3)(4)  
150D225(1)020A(2)(3)(4)  
150D275(1)020B(2)(3)(4)  
150D335(1)020B(2)(3)(4)  
150D395(1)020B(2)(3)(4)  
150D475(1)020B(2)(3)(4)  
150D565(1)020B(2)(3)(4)  
150D685(1)020B(2)(3)(4)  
150D825(1)020B(2)(3)(4)  
150D106(1)020B(2)(3)(4)  
150D126(1)020B(2)(3)(4)  
150D156(1)020B(2)(3)(4)  
150D186(1)020R(2)(3)(4)  
150D226(1)020R(2)(3)(4)  
150D276(1)020R(2)(3)(4)  
0.1  
0.1  
0.1  
0.1  
0.1  
0.1  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
2.0  
3.0  
3.0  
3.0  
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
4
4
4
4
4
4
4
4
4
6
6
6
6
6
6
6
6
1.2  
1.5  
1.8  
2.2  
2.7  
3.3  
3.9  
4.7  
5.6  
6.8  
8.2  
10  
12  
15  
18  
22  
27  
Note  
Part number definitions:  
•
(1) For 10 ꢀ tolerance specify “X9”; for 20 ꢀ specify “X0”; for 5 ꢀ “X5” (special order)  
(2) Style number: 0 = no sleeve, 2 = insulated sleeve  
(3) Packaging options: B = bulk, T = tape and reel, G = ammo pack  
(4) Termination: E3 = 100 ꢀ tin, blank = SnPb  
Revision: 16-Nov-17  
Document Number: 40015  
5
For technical questions, contact: tantalum@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
150D  
Vishay Sprague  
www.vishay.com  
STANDARD RATINGS  
MAX. DF  
AT +25 °C  
120 Hz  
(%)  
MAX. DCL  
AT +25 °C  
(μA)  
CAPACITANCE  
(μF)  
CASE CODE  
PART NUMBER  
20 VDC AT +85 °C, SURGE = 26 V; 13 VDC AT +125 °C, SURGE = 16 V  
33  
39  
R
R
R
S
S
S
S
150D336(1)020R(2)(3)(4)  
150D396(1)020R(2)(3)(4)  
150D476(1)020R(2)(3)(4)  
150D566(1)020S(2)(3)(4)  
150D686(1)020S(2)(3)(4)  
150D826(1)020S(2)(3)(4)  
150D107(1)020S(2)(3)(4)  
3.0  
3.0  
6.0  
6.0  
6.0  
6.0  
10.0  
6
6
6
6
6
6
6
47  
56  
68  
82  
100  
25 VDC AT +85 °C, SURGE = 32 V; 17 VDC AT +125 °C, SURGE = 21 V  
1.2  
1.5  
1.8  
4.7  
5.6  
6.8  
8.2  
10  
A
A
A
B
B
B
B
B
B
R
S
S
150D125(1)025A(2)(3)(4)  
150D155(1)025A(2)(3)(4)  
150D185(1)025A(2)(3)(4)  
150D475(1)025B(2)(3)(4)  
150D565(1)025B(2)(3)(4)  
150D685(1)025B(2)(3)(4)  
150D825(1)025B(2)(3)(4)  
150D106(1)025B(2)(3)(4)  
150D156(1)025B(2)(3)(4)  
150D336(1)025R(2)(3)(4)  
150D686(1)025S(2)(3)(4)  
150D107(1)025S(2)(3)(4)  
0.5  
0.5  
0.5  
1.2  
1.4  
1.7  
2.1  
2.5  
3.8  
8.3  
17  
4
4
4
4
4
4
4
6
6
6
6
6
15  
33  
68  
100  
25  
35 VDC AT +85 °C, SURGE = 46 V; 23 VDC AT +125 °C, SURGE = 28 V  
0.033  
0.039  
0.047  
0.056  
0.068  
0.082  
0.10  
0.12  
0.15  
0.18  
0.22  
0.27  
0.33  
0.39  
0.47  
0.56  
0.68  
0.82  
1.0  
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
B
150D333(1)035A(2)(3)(4)  
150D393(1)035A(2)(3)(4)  
150D473(1)035A(2)(3)(4)  
150D563(1)035A(2)(3)(4)  
150D683(1)035A(2)(3)(4)  
150D823(1)035A(2)(3)(4)  
150D104(1)035A(2)(3)(4)  
150D124(1)035A(2)(3)(4)  
150D154(1)035A(2)(3)(4)  
150D184(1)035A(2)(3)(4)  
150D224(1)035A(2)(3)(4)  
150D274(1)035A(2)(3)(4)  
150D334(1)035A(2)(3)(4)  
150D394(1)035A(2)(3)(4)  
150D474(1)035A(2)(3)(4)  
150D564(1)035A(2)(3)(4)  
150D684(1)035A(2)(3)(4)  
150D824(1)035A(2)(3)(4)  
150D105(1)035A(2)(3)(4)  
150D125(1)035B(2)(3)(4)  
150D155(1)035B(2)(3)(4)  
0.1  
0.1  
0.1  
0.1  
0.1  
0.1  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
4
4
1.2  
1.5  
Note  
Part number definitions:  
•
(1) For 10 ꢀ tolerance specify “X9”; for 20 ꢀ specify “X0”; for 5 ꢀ “X5” (special order)  
(2) Style number: 0 = no sleeve, 2 = insulated sleeve  
(3) Packaging options: B = bulk, T = tape and reel, G = ammo pack  
(4) Termination: E3 = 100 ꢀ tin, blank = SnPb  
Revision: 16-Nov-17  
Document Number: 40015  
6
For technical questions, contact: tantalum@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
150D  
Vishay Sprague  
www.vishay.com  
STANDARD RATINGS  
MAX. DF  
AT +25 °C  
120 Hz  
(%)  
MAX. DCL  
AT +25 °C  
(μA)  
CAPACITANCE  
(μF)  
CASE CODE  
PART NUMBER  
35 VDC AT +85 °C, SURGE = 46 V; 23 VDC AT +125 °C, SURGE = 28 V  
1.8  
2.2  
2.7  
3.3  
3.9  
4.7  
5.6  
6.8  
8.2  
10  
B
B
B
B
B
B
B
B
R
R
R
R
R
R
S
S
S
S
150D185(1)035B(2)(3)(4)  
150D225(1)035B(2)(3)(4)  
150D275(1)035B(2)(3)(4)  
150D335(1)035B(2)(3)(4)  
150D395(1)035B(2)(3)(4)  
150D475(1)035B(2)(3)(4)  
150D565(1)035B(2)(3)(4)  
150D685(1)035B(2)(3)(4)  
150D825(1)035R(2)(3)(4)  
150D106(1)035R(2)(3)(4)  
150D126(1)035R(2)(3)(4)  
150D156(1)035R(2)(3)(4)  
150D186(1)035R(2)(3)(4)  
150D226(1)035R(2)(3)(4)  
150D276(1)035S(2)(3)(4)  
150D336(1)035S(2)(3)(4)  
150D396(1)035S(2)(3)(4)  
150D476(1)035S(2)(3)(4)  
0.5  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
2.0  
3.0  
3.0  
3.0  
3.0  
3.0  
6.0  
6.0  
6.0  
6.0  
10.0  
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
12  
15  
18  
22  
27  
33  
39  
47  
50 VDC AT +85 °C, SURGE = 65 V; 33 VDC AT +125 °C, SURGE = 40 V  
0.056  
0.068  
0.082  
0.10  
0.12  
0.15  
0.18  
0.22  
0.27  
0.33  
0.39  
0.47  
0.56  
0.68  
0.82  
1.0  
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
B
B
B
B
B
B
150D563(1)050A(2)(3)(4)  
150D683(1)050A(2)(3)(4)  
150D823(1)050A(2)(3)(4)  
150D104(1)050A(2)(3)(4)  
150D124(1)050A(2)(3)(4)  
150D154(1)050A(2)(3)(4)  
150D184(1)050A(2)(3)(4)  
150D224(1)050A(2)(3)(4)  
150D274(1)050A(2)(3)(4)  
150D334(1)050A(2)(3)(4)  
150D394(1)050A(2)(3)(4)  
150D474(1)050A(2)(3)(4)  
150D564(1)050A(2)(3)(4)  
150D684(1)050A(2)(3)(4)  
150D824(1)050A(2)(3)(4)  
150D105(1)050A(2)(3)(4)  
150D125(1)050B(2)(3)(4)  
150D155(1)050B(2)(3)(4)  
150D185(1)050B(2)(3)(4)  
150D225(1)050B(2)(3)(4)  
150D275(1)050B(2)(3)(4)  
150D335(1)050B(2)(3)(4)  
150D395(1)050B(2)(3)(4)  
0.1  
0.1  
0.1  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
1.0  
1.0  
2.0  
2.0  
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
4
4
4
4
4
4
4
1.2  
1.5  
1.8  
2.2  
2.7  
3.3  
3.9  
Note  
Part number definitions:  
•
(1) For 10 ꢀ tolerance specify “X9”; for 20 ꢀ specify “X0”; for 5 ꢀ “X5” (special order)  
(2) Style number: 0 = no sleeve, 2 = insulated sleeve  
(3) Packaging options: B = bulk, T = tape and reel, G = ammo pack  
(4) Termination: E3 = 100 ꢀ tin, blank = SnPb  
Revision: 16-Nov-17  
Document Number: 40015  
7
For technical questions, contact: tantalum@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
150D  
Vishay Sprague  
www.vishay.com  
STANDARD RATINGS  
MAX. DF  
AT +25 °C  
120 Hz  
(%)  
MAX. DCL  
AT +25 °C  
(μA)  
CAPACITANCE  
(μF)  
CASE CODE  
PART NUMBER  
50 VDC AT +85 °C, SURGE = 65 V; 33 VDC AT +125 °C, SURGE = 40 V  
4.7  
5.6  
6.8  
8.2  
10  
B
R
R
R
R
R
R
R
S
150D475(1)050B(2)(3)(4)  
150D565(1)050R(2)(3)(4)  
150D685(1)050R(2)(3)(4)  
150D825(1)050R(2)(3)(4)  
150D106(1)050R(2)(3)(4)  
150D126(1)050R(2)(3)(4)  
150D156(1)050R(2)(3)(4)  
150D186(1)050R(2)(3)(4)  
150D226(1)050S(2)(3)(4)  
3.0  
3.0  
3.0  
3.0  
3.0  
3.0  
6.0  
6.0  
6.0  
4
4
4
4
4
4
4
4
4
12  
15  
18  
22  
60 VDC AT +85 °C, SURGE = 78 V; 40 VDC AT +125 °C, SURGE = 49 V  
0.10  
0.12  
0.15  
0.18  
0.22  
0.27  
0.33  
0.39  
0.47  
0.56  
0.68  
1.0  
A
A
A
A
A
A
A
A
A
A
A
B
B
R
R
R
R
R
S
S
S
S
150D104(1)060A(2)(3)(4)  
150D124(1)060A(2)(3)(4)  
150D154(1)060A(2)(3)(4)  
150D184(1)060A(2)(3)(4)  
150D224(1)060A(2)(3)(4)  
150D274(1)060A(2)(3)(4)  
150D334(1)060A(2)(3)(4)  
150D394(1)060A(2)(3)(4)  
150D474(1)060A(2)(3)(4)  
150D564(1)060A(2)(3)(4)  
150D684(1)060A(2)(3)(4)  
150D105(1)060B(2)(3)(4)  
150D225(1)060B(2)(3)(4)  
150D475(1)060R(2)(3)(4)  
150D565(1)060R(2)(3)(4)  
150D685(1)060R(2)(3)(4)  
150D825(1)060R(2)(3)(4)  
150D106(1)060R(2)(3)(4)  
150D126(1)060S(2)(3)(4)  
150D156(1)060S(2)(3)(4)  
150D186(1)060S(2)(3)(4)  
150D226(1)060S(2)(3)(4)  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
1.0  
3.0  
3.0  
4.0  
5.0  
6.0  
6.0  
9.0  
10.0  
12.0  
4.0  
4.0  
4.0  
4.0  
4.0  
4.0  
4.0  
4.0  
4.0  
4.0  
4.0  
4.0  
4.0  
6.0  
6.0  
6.0  
6.0  
6.0  
6.0  
6.0  
6.0  
6.0  
2.2  
4.7  
5.6  
6.8  
8.2  
10  
12  
15  
18  
22  
75 VDC AT +85 °C, SURGE = 98 V; 50 VDC AT +125 °C, SURGE = 64 V  
0.033  
0.039  
0.047  
0.056  
0.068  
0.082  
0.10  
A
A
A
A
A
A
A
A
A
150D333(1)075A(2)(3)(4)  
150D393(1)075A(2)(3)(4)  
150D473(1)075A(2)(3)(4)  
150D563(1)075A(2)(3)(4)  
150D683(1)075A(2)(3)(4)  
150D823(1)075A(2)(3)(4)  
150D104(1)075A(2)(3)(4)  
150D124(1)075A(2)(3)(4)  
150D154(1)075A(2)(3)(4)  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
2
2
2
2
2
2
2
2
2
0.12  
0.15  
Note  
Part number definitions:  
•
(1) For 10 ꢀ tolerance specify “X9”; for 20 ꢀ specify “X0”; for 5 ꢀ “X5” (special order)  
(2) Style number: 0 = no sleeve, 2 = insulated sleeve  
(3) Packaging options: B = bulk, T = tape and reel, G = ammo pack  
(4) Termination: E3 = 100 ꢀ tin, blank = SnPb  
Revision: 16-Nov-17  
Document Number: 40015  
8
For technical questions, contact: tantalum@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
150D  
Vishay Sprague  
www.vishay.com  
STANDARD RATINGS  
MAX. DF  
AT +25 °C  
120 Hz  
(%)  
MAX. DCL  
AT +25 °C  
(μA)  
CAPACITANCE  
(μF)  
CASE CODE  
PART NUMBER  
75 VDC AT +85 °C, SURGE = 98 V; 50 VDC AT +125 °C, SURGE = 64 V  
0.18  
0.22  
0.27  
0.33  
0.39  
0.47  
0.56  
0.68  
0.82  
1.0  
A
A
A
A
A
A
A
A
B
B
B
B
B
B
B
B
B
R
R
R
R
R
S
S
150D184(1)075A(2)(3)(4)  
150D224(1)075A(2)(3)(4)  
150D274(1)075A(2)(3)(4)  
150D334(1)075A(2)(3)(4)  
150D394(1)075A(2)(3)(4)  
150D474(1)075A(2)(3)(4)  
150D564(1)075A(2)(3)(4)  
150D684(1)075A(2)(3)(4)  
150D824(1)075B(2)(3)(4)  
150D105(1)075B(2)(3)(4)  
150D125(1)075B(2)(3)(4)  
150D155(1)075B(2)(3)(4)  
150D185(1)075B(2)(3)(4)  
150D225(1)075B(2)(3)(4)  
150D275(1)075B(2)(3)(4)  
150D335(1)075B(2)(3)(4)  
150D395(1)075B(2)(3)(4)  
150D475(1)075R(2)(3)(4)  
150D565(1)075R(2)(3)(4)  
150D685(1)075R(2)(3)(4)  
150D825(1)075R(2)(3)(4)  
150D106(1)075R(2)(3)(4)  
150D126(1)075S(2)(3)(4)  
150D156(1)075S(2)(3)(4)  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
1.0  
1.0  
1.0  
1.0  
2.0  
2.0  
4.0  
4.0  
6.0  
6.0  
8.0  
10.0  
12.0  
2
2
2
2
2
2
2
2
2
2
4
4
4
4
4
4
4
4
4
4
4
4
4
4
1.2  
1.5  
1.8  
2.2  
2.7  
3.3  
3.9  
4.7  
5.6  
6.8  
8.2  
10  
12  
15  
100 VDC AT +85 °C, SURGE = 130 V; 67 VDC AT +125 °C, SURGE = 86 V  
0.033  
0.039  
0.047  
0.056  
0.068  
0.082  
0.10  
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
150D333(1)100A(2)(3)(4)  
150D393(1)100A(2)(3)(4)  
150D473(1)100A(2)(3)(4)  
150D563(1)100A(2)(3)(4)  
150D683(1)100A(2)(3)(4)  
150D823(1)100A(2)(3)(4)  
150D104(1)100A(2)(3)(4)  
150D124(1)100A(2)(3)(4)  
150D154(1)100A(2)(3)(4)  
150D184(1)100A(2)(3)(4)  
150D224(1)100A(2)(3)(4)  
150D274(1)100A(2)(3)(4)  
150D334(1)100A(2)(3)(4)  
150D394(1)100A(2)(3)(4)  
150D474(1)100A(2)(3)(4)  
150D564(1)100A(2)(3)(4)  
150D684(1)100B(2)(3)(4)  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
0.5  
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
0.12  
0.15  
0.18  
0.22  
0.27  
0.33  
0.39  
0.47  
0.56  
0.68  
Note  
Part number definitions:  
•
(1) For 10 ꢀ tolerance specify “X9”; for 20 ꢀ specify “X0”; for 5 ꢀ “X5” (special order)  
(2) Style number: 0 = no sleeve, 2 = insulated sleeve  
(3) Packaging options: B = bulk, T = tape and reel, G = ammo pack  
(4) Termination: E3 = 100 ꢀ tin, blank = SnPb  
Revision: 16-Nov-17  
Document Number: 40015  
9
For technical questions, contact: tantalum@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
150D  
Vishay Sprague  
www.vishay.com  
STANDARD RATINGS  
MAX. DF  
AT +25 °C  
120 Hz  
(%)  
MAX. DCL  
AT +25 °C  
(μA)  
CAPACITANCE  
(μF)  
CASE CODE  
PART NUMBER  
100 VDC AT +85 °C, SURGE = 130 V; 67 VDC AT +125 °C, SURGE = 86 V  
0.82  
1.0  
1.2  
1.5  
1.8  
2.2  
2.7  
3.3  
3.9  
4.7  
5.6  
6.8  
8.2  
10  
B
B
B
B
B
B
B
R
R
R
R
R
S
S
150D824(1)100B(2)(3)(4)  
150D105(1)100B(2)(3)(4)  
150D125(1)100B(2)(3)(4)  
150D155(1)100B(2)(3)(4)  
150D185(1)100B(2)(3)(4)  
150D225(1)100B(2)(3)(4)  
150D275(1)100B(2)(3)(4)  
150D335(1)100R(2)(3)(4)  
150D395(1)100R(2)(3)(4)  
150D475(1)100R(2)(3)(4)  
150D565(1)100R(2)(3)(4)  
150D685(1)100R(2)(3)(4)  
150D825(1)100S(2)(3)(4)  
150D106(1)100S(2)(3)(4)  
0.5  
0.5  
0.5  
0.6  
0.6  
0.6  
0.6  
2.5  
3.0  
4.0  
4.0  
6.0  
6.0  
6.0  
2
2
3
3
3
3
3
3
3
3
3
3
3
3
125 VDC AT +85 °C, SURGE = 140 V; 82 VDC AT +125 °C, SURGE = 94 V  
0.027  
0.033  
0.039  
0.047  
0.056  
0.068  
0.082  
0.10  
0.12  
0.15  
0.18  
0.22  
0.27  
0.33  
0.39  
0.47  
0.56  
0.68  
0.82  
1.0  
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
B
B
B
B
B
B
B
150D273(1)125A(2)(3)(4)  
150D333(1)125A(2)(3)(4)  
150D393(1)125A(2)(3)(4)  
150D473(1)125A(2)(3)(4)  
150D563(1)125A(2)(3)(4)  
150D683(1)125A(2)(3)(4)  
150D823(1)125A(2)(3)(4)  
150D104(1)125A(2)(3)(4)  
150D124(1)125A(2)(3)(4)  
150D154(1)125A(2)(3)(4)  
150D184(1)125A(2)(3)(4)  
150D224(1)125A(2)(3)(4)  
150D274(1)125A(2)(3)(4)  
150D334(1)125A(2)(3)(4)  
150D394(1)125A(2)(3)(4)  
150D474(1)125A(2)(3)(4)  
150D564(1)125B(2)(3)(4)  
150D684(1)125B(2)(3)(4)  
150D824(1)125B(2)(3)(4)  
150D105(1)125B(2)(3)(4)  
150D125(1)125B(2)(3)(4)  
150D155(1)125B(2)(3)(4)  
150D185(1)125B(2)(3)(4)  
150D225(1)125B(2)(3)(4)  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.5  
1.5  
1.6  
1.8  
2.0  
2.0  
2.0  
2.0  
2.0  
2.0  
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
1.2  
1.5  
1.8  
2.2  
Note  
Part number definitions:  
•
(1) For 10 ꢀ tolerance specify “X9”; for 20 ꢀ specify “X0”; for 5 ꢀ “X5” (special order)  
(2) Style number: 0 = no sleeve, 2 = insulated sleeve  
(3) Packaging options: B = bulk, T = tape and reel, G = ammo pack  
(4) Termination: E3 = 100 ꢀ tin, blank = SnPb  
Revision: 16-Nov-17  
Document Number: 40015  
10  
For technical questions, contact: tantalum@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
150D  
Vishay Sprague  
www.vishay.com  
TAPE AND REEL PACKAGING in inches [millimeters]  
Meets EIA standard RS-296  
“A”  
Tape  
spacing  
13.0 [330.2]  
Standard reel  
B
Component  
spacing  
1.126 to 3.07  
[28.6 to 78.0]  
A
I. D. reel hub  
1.374 to 3.626  
[34.9 to 92.1]  
0.031 [0.79] max.  
Off center (1. a)  
0.625 0.0062 dia.  
[15.88 1.575]  
0.125 [3.18] max.  
0.250 [6.35] (3. b)  
Thru hole  
0.750 [19.05]  
Section “A” - “A”  
0.031 [0.79] (3. f)  
Both sides (3. f)  
“A”  
Label (4. a)  
STANDARD PACKAGING QUANTITY AND DIMENSIONS in inches [millimeters]  
TAPE AND REEL  
AMMO PACK  
CASE  
CODE  
COMPONENT SPACING  
A
TAPE SPACING  
B
TAPE SPACING  
UNITS PER REEL  
UNITS PER BOX  
B
0.200 0.015  
[5.08 0.38]  
0.200 0.015  
[5.08 0.38]  
0.400 0.015  
[10.16 0.38]  
0.400 0.015  
[10.16 0.38]  
2.500 0.062  
[63.5 1.57]  
2.500 0.062  
[63.5 1.57]  
2.875 0.062  
[73.03 1.57]  
2.875 0.062  
[73.03 1.57]  
2.063 0.073  
[53 2]  
2.063 0.073  
[53 2]  
2.063 0.073  
[53 2]  
2.063 0.073  
[53 2]  
A
B
R
S
1000  
1000  
500  
500  
500  
250  
250  
500  
STANDARD REEL PACKAGING INFORMATION  
1. Component Leads  
f. A row of components must be centered between tapes  
0.047" [1.19 mm]. In addition, individual components  
a. Component leads shall not be bent beyond 0.047"  
[1.19 mm] maximum from their nominal position when  
measured from the leading edge of the component lead  
at the inside tape edge and at the lead egress from the  
component.  
b. The “C” dimension shall be governed by the overall  
length of the reel packaged component. The distance  
between flanges shall be 0.125" to 0.250" [3.18 mm to  
6.35 mm] greater than the overall component length.  
may deviate from center of component row  
[0.79 mm].  
0.031"  
g. Staples shall not be used for splicing. Not more than  
4 layers of tape shall be used in any splice area and no  
tape shall be offset from another by more than 0.031"  
[0.79 mm] non-cumulative. Tape splices shall overlap at  
least 6.0" [152.4 mm] for butt joints and at least 3.0"  
[76.2 mm] for lap joints and shall not be weaker than  
unspliced tape. Universal splicing clips may also be used.  
h. Quantity per reel shall be controlled so that tape  
components and cover shall not extend beyond the  
smallest dimension of the flange (either across flats or  
diameter). Once the quantity per reel for each part  
number has been established, future orders for that part  
number shall be packaged in that quantity. When order or  
release quantity is less than the established quantity, a  
standard commercial pack is to be used.  
i. A maximum of 0.25 ꢀ of the components per reel  
quantity may be missing without consecutive missing  
components.  
j. Adequate protection must be provided to prevent  
physical damage to both reel and components during  
shipment and storage.  
2. Orientation  
All polarized components must be oriented to one  
direction. The cathode lead tape shall be a color and the  
anode lead tape shall be white.  
3. Reeling  
a. Components on any reel shall not represent more than  
two date codes when date code identification is required.  
b. Component leads shall be positioned between pairs of  
0.250" [6.35 mm] tape.  
c. The disposable reels have hubs and corrugated  
fibreboard flanges and core or equivalent.  
d. A minimum of 12.0" [304.8 mm] leader of tape shall be  
provided before the first and after the last component on  
the reel.  
e. 50 lb or 60 lb. Kraft paper must be wound between layer  
of components as far as necessary for component  
protection. Width of paper to be 0.062" to 0.250"  
[1.57 mm to 6.35 mm] less than the “C” dimension  
of the reel. Solid-electrolyte TANTALEX capacitors  
hermetically-sealed, axial-lead.  
4. Marking  
Minimum reel and carton marking shall consist of the  
following: customer part number, purchase order no.,  
quantity, package date, manufacturer’s name, electrical  
value, date code, Vishay Sprague part number and  
country of origin.  
Revision: 16-Nov-17  
Document Number: 40015  
11  
For technical questions, contact: tantalum@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
Legal Disclaimer Notice  
www.vishay.com  
Vishay  
Disclaimer  
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE  
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.  
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,  
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other  
disclosure relating to any product.  
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or  
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all  
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,  
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular  
purpose, non-infringement and merchantability.  
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of  
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding  
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a  
particular product with the properties described in the product specification is suitable for use in a particular application.  
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over  
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s  
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,  
including but not limited to the warranty expressed therein.  
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining  
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.  
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.  
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for  
such applications.  
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document  
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.  
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED  
Revision: 08-Feb-17  
Document Number: 91000  
1

相关型号：

SI9130DB

 5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

 Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

 500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明