34THES1BZF9P22 [VISHAY]
Position, Rotary, Hall Effect Sensor, POSITION, ROTARY SENSOR-HALL EFFECT, CYLINDRICAL, ROHS COMPLIANT PACKAGE;型号: | 34THES1BZF9P22 |
厂家: | VISHAY |
描述: | Position, Rotary, Hall Effect Sensor, POSITION, ROTARY SENSOR-HALL EFFECT, CYLINDRICAL, ROHS COMPLIANT PACKAGE 传感器 换能器 |
文件: | 总6页 (文件大小:130K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
34 THE
Vishay Spectrol
www.vishay.com
Ten Turns Servo or Bushing Mount Hall Effect
Sensor in Size 09 (22.2 mm)
FEATURES
• All electrical angles available up to: 3600°
• Accurate linearity down to: 0.5 ꢀ
• Very long life: 50M cycles for servo, 10M cycles
for bushing
• Non contacting technology: Hall effect; true power on
sensor
• Model dedicated to applications requiring long life
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
ELECTRICAL SPECIFICATIONS
PARAMETER
Electrical angle
Linearity
STANDARD
10 turns 3600°
1 ꢀ
SPECIAL
Any other angle upon request
0.5 ꢀ
Supply voltage
Supply current
5 VDC 10 ꢀ
< 16 mA for single
Other upon request
< 32 mA for redundant
Analog ratiometric 1 ꢀ to 99 ꢀ of Vsupply (other on request)
or PWM 1 kHz, 10 ꢀ to 90 ꢀ duty cycle or SPI binary on 5 V or binary on 3.3 V
Output signal
Over voltage protection
Reverse voltage protection
Load resistance recommended
Hysteresis static
+ 20 VDC
- 10 VDC
Min. 1 k for analog output and PWM output
10° on drive shaft
MECHANICAL SPECIFICATIONS
PARAMETER
Mechanical travel
Bearing type
Standard
3600° continuous
A sleeve bearing for bushing model/2 ball bearings for servo model
IP 50; other on request
Resolution
12 bits for analog and PWM, 14 bits for SPI
ORDERING INFORMATION/DESCRIPTION
34 THE
B
1
A
T
A
2S22
XXXX
BO 1
e1
MOUNTING NUMBER OF
OUTPUT
TYPE
OUTPUT
SIGNAL
SHAFT
TYPE
SPECIAL
REQUEST
LEAD
FINISH
MODEL
LINEARITY
PACKAGING
TYPE
SIGNALS
B: Bushing
S: Servo
1: Single
A: 1 ꢀ
T: Turrets
Z: Custom
W: Wires
A: Analog CW
B: Analog CCW
C: PWM CW
2: 3.175 mm
9: Special
P: Plain
S: Slotted
Z: Other type
Box of
1 piece
2: Redundant B: 0.5 ꢀ
(crossed laws)
D: PWM CCW
E: SPI CW (1)
F: SPI CCW (1)
Z: Other output
Shaft length from mounting face standard: 22 mm
Note
(1)
SPI output output type: Wires
SAP PART NUMBERING GUIDELINES
34 THE
S
2
B
T
C
2P12
XXXX
SERVO
TYPE
2 OUTPUT
SIGNALS
OUTPUT
TYPE
OUTPUT
SIGNAL
SHAFT
TYPE
SPECIAL
REQUEST
MODEL
LINEARITY
B: 0.5 ꢀ
Revision: 02-Apr-12
Document Number: 57114
1
For technical questions, contact: sfer@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
34 THE
Vishay Spectrol
www.vishay.com
VOUT ANALOG
Single Output
99 %
50 %
1 %
Output S1
0°
1800°
3600°
Direction of Running (°)
Redundant Output
99 %
50 %
1 %
Output S1
Output S2
0°
1800°
3600°
Direction of Running (°)
V
OUT PWM
Vout
(% Vsupply
)
CW
97 % min.
T high
Thigh
T
Duty Cycle =
T low
1.5 % max.
0
Time
T: Periodicity
VOUT SPI
Notice on demand
Revision: 02-Apr-12
Document Number: 57114
2
For technical questions, contact: sfer@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
34 THE
Vishay Spectrol
www.vishay.com
MECHANICAL SPECIFICATIONS
PARAMETER
STANDARD
SPECIAL
Servo mounting type or bushing mount
(delivered with nut and washer)
Mounting type
Housing
Anodized aluminum
Shaft guiding
Shaft
2 ball bearings for servo and sleeve bearing for bushing
Stainless steel Ø 3.175
Turrets
Other on request
Other on request
Outputs
Mechanical travel
3600° and no stop
ENVIRONMENTAL SPECIFICATIONS
Operating temperature range
- 40 °C; + 85 °C
> 10M of cycles for bushing
> 50M of cycles for servo
Life
Rotational speed (max.)
1200 rpm
Immunity to radiated electromagnetic disturbances
Immunity to power frequency magnetic field
Radiated electromagnetic emissions
200 V/m 150 kHz/1 GHz, IEC 62132-2 part 2 (level A)
200 A/m 50 Hz/60 Hz, EN 61000-4-8 (level A)
30 MHz/1 GHz < 30 dBμV/m, EN 61000-6-4 (level A)
Contact discharges: 4 kV
Air discharges: 8 kV, EN 61000-4-2
Electrostatic discharges
Sine vibration on 3 axes
1.5 mm or 20 g from 10 Hz to 2000 Hz
50 g, 11 ms, half sine
Mechanical shocks on 3 axes
Revision: 02-Apr-12
Document Number: 57114
3
For technical questions, contact: sfer@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
34 THE
Vishay Spectrol
www.vishay.com
DIMENSIONS in millimeters
22 ꢀ0.
2201 ꢀ0ꢁ
.09 ꢀ02
106 ꢀ01
Label
302 ꢀ0ꢁ
CW
Ø 90ꢁ2 pas ꢀ079
3/. - 32 UNEF 2A
Ø 2202 ꢀ02ꢁ
Ø 3017ꢁ
+ ꢀ/- ꢀ0ꢀ13
ꢀ0ꢁ at 4ꢁ°
Ø 1ꢀ03
+ ꢀ/- ꢀ0ꢀ2
Viewed from shaft side
9
40ꢁ
3 x Ø 107 ꢀ02
306
306
4 x Ø 107 ꢀ02
S2
+
S1
603
+
-
407
-
1102
S
702
702
Single output
Redundant output
Revision: 02-Apr-12
Document Number: 57114
4
For technical questions, contact: sfer@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
34 THE
Vishay Spectrol
www.vishay.com
DIMENSIONS in millimeters
2101 ꢀ0ꢁ
1207 ꢀ0.
106 ꢀ01
106 ꢀ01
106 ꢀ01
CW
Ø 2202 ꢀ02ꢁ
Ø 3017ꢁ
+ ꢀ/- ꢀ0ꢀ13
Ø 190ꢀꢁ
+ ꢀ/- ꢀ0ꢀ2ꢁ
Ø 1904 ꢀ02ꢁ
302 ꢀ0ꢁ
Label
9
40ꢁ
3 x Ø 107 ꢀ02
306
306
4 x Ø 107 ꢀ02
+
-
S2
S1
603
407
1102
+
-
S
702
702
Single output
Redundant output
Revision: 02-Apr-12
Document Number: 57114
5
For technical questions, contact: sfer@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Revision: 12-Mar-12
Document Number: 91000
1
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明