40TPS16 [VISHAY]
Phase Control SCR, 35 A; 相位控制可控硅,一个35型号: | 40TPS16 |
厂家: | VISHAY |
描述: | Phase Control SCR, 35 A |
文件: | 总7页 (文件大小:141K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
40TPS16 High Voltage Series
Vishay High Power Products
Phase Control SCR, 35 A
DESCRIPTION/FEATURES
2
The 40TPS16 High Voltage Series of silicon controlled
rectifiers are specifically designed for medium power
switching and phase control applications. The glass
passivation technology used has reliable operation up to
125 °C junction temperature. Low Igt parts available.
(A)
Typical applications are in input rectification (soft start) and
these products are designed to be used with Vishay HPP
input diodes, switches and output rectifiers which are
available in identical package outlines.
1 (K)
(G) 3
TO-247AC
PRODUCT SUMMARY
This product has been designed and qualified for industrial
level.
VT at 40 A
< 1.45 V
500 A
ITSM
VRRM
1600 V
MAJOR RATINGS AND CHARACTERISTICS
PARAMETER
TEST CONDITIONS
VALUES
35
UNITS
IT(AV)
Sinusoidal waveform
A
IRMS
55
VRRM/VDRM
ITSM
Range (1)
1600
500
V
A
VT
40 A, TJ = 25 °C
1.45
V
dV/dt
1000
100
V/µs
A/µs
°C
dI/dt
TJ
- 40 to 125
Note
(1)
Contact factory
VOLTAGE RATINGS
V
RRM/VDRM, MAXIMUM
V
RSM, MAXIMUM
I
RRM/IDRM
REPETITIVE PEAK AND
OFF-STATE VOLTAGE
V
NON-REPETITIVE PEAK
REVERSE VOLTAGE
V
PART NUMBER
AT 125 °C
mA
40TPS16
1600
1700
10
Document Number: 93709
Revision: 12-Sep-08
For technical questions, contact: diodes-tech@vishay.com
www.vishay.com
1
40TPS16 High Voltage Series
Phase Control SCR, 35 A
Vishay High Power Products
ABSOLUTE MAXIMUM RATINGS
PARAMETER
SYMBOL
TEST CONDITIONS
VALUES
UNITS
Maximum average on-state current
IT(AV)
TC = 79 °C, 180° conduction half sine wave
35
Maximum continuous RMS
on-state current as AC switch
IT(RMS)
55
A
10 ms sine pulse, rated VRRM applied
10 ms sine pulse, no voltage reapplied
500
600
Maximum peak, one-cycle
non-repetitive surge current
ITSM
Initial TJ =
TJ maximum
10 ms sine pulse, rated VRRM applied
10 ms sine pulse, no voltage reapplied
t = 0.1 to 10 ms, no voltage reapplied
1250
1760
12 500
1.02
1.23
9.74
7.50
1.85
100
Maximum I2t for fusing
I2t
A2s
A2√s
V
Maximum I2√t for fusing
I2√t
VT(TO)1
VT(TO)2
rt1
Low level value of threshold voltage
High level value of threshold voltage
Low level value of on-state slope resistance
High level value of on-state slope resistance
Maximum peak on-state voltage
Maximum rate of rise of turned-on current
Maximum holding current
TJ = 125 °C
mΩ
rt2
VTM
dI/dt
IH
110 A, TJ = 25 °C
TJ = 25 °C
V
A/µs
150
Maximum latching current
IL
300
mA
TJ = 25 °C
0.5
Maximum reverse and direct leakage current
Maximum rate of rise of off-state voltage
IRRM/IDRM
dV/dt
VR = Rated VRRM/VDRM
TJ = 125 °C
10
TJ = TJ maximum, linear to 80 % VDRM, Rg-k = Open
1000
V/µs
TRIGGERING
PARAMETER
SYMBOL
PGM
TEST CONDITIONS
VALUES
10
UNITS
Maximum peak gate power
Maximum average gate power
Maximum peak gate current
Maximum peak negative gate voltage
W
A
PG(AV)
IGM
2.5
2.5
10
- VGM
TJ = - 40 °C
4.0
2.5
1.7
270
150
80
V
Maximum required DC gate
voltage to trigger
VGT
TJ = 25 °C
TJ = 125 °C
TJ = - 40 °C
TJ = 25 °C
TJ = 125 °C
Anode supply = 6 V resistive load
Maximum required DC gate current to trigger
IGT
mA
TJ = 25 °C, for 40TPS08A
40
Maximum DC gate voltage not to trigger
Maximum DC gate current not to trigger
VGD
IGD
0.25
6
V
TJ = 125 °C, VDRM = Rated value
mA
www.vishay.com
2
For technical questions, contact: diodes-tech@vishay.com
Document Number: 93709
Revision: 12-Sep-08
40TPS16 High Voltage Series
Phase Control SCR, 35 A
Vishay High Power Products
THERMAL AND MECHANICAL SPECIFICATIONS
PARAMETER
SYMBOL
TEST CONDITIONS
VALUES
UNITS
Maximum junction and storage
temperature range
TJ, TStg
- 40 to 125
°C
Maximum thermal resistance,
junction to case
RthJC
RthJA
RthCS
DC operation
0.6
40
Maximum thermal resistance,
junction to ambient
°C/W
Maximum thermal resistance,
case to heatsink
Mounting surface, smooth and greased
0.2
6
g
Approximate weight
0.21
oz.
minimum
maximum
6 (5)
kgf · cm
(lbf · in)
Mounting torque
Marking device
12 (10)
Case style TO-247AC
40TPS16
Document Number: 93709
Revision: 12-Sep-08
For technical questions, contact: diodes-tech@vishay.com
www.vishay.com
3
40TPS16 High Voltage Series
Phase Control SCR, 35 A
Vishay High Power Products
130
80
70
60
50
40
30
20
10
0
40TPS.. Series
thJC
DC
180°
120°
90°
60°
30°
R
(DC) = 0.6 °C/W
120
110
100
90
Conduction Angle
RMS Lim it
30°
60°
90°
20
Conduction Period
40TPS.. Series
120°
180°
80
T = 125 °C
J
70
0
10
30
40
0
10
20
30
40
50
60
Average On-state Current (A)
Average On-state Current (A)
Fig. 1 - Current Rating Characteristics
Fig. 4 - On-State Power Loss Characteristics
130
120
110
100
90
550
40TPS.. Series
thJC
At Any Rated Load Condition And With
R
(DC) = 0.6 °C/W
Rated V
Applied Following Surge.
RRM
Initial T = 125°C
J
@60 Hz 0.0083 s
@50 Hz 0.0100 s
500
450
400
350
300
250
Conduction Period
30°
10
60°
90°
120°
30
180°
80
4 0 TPS. . Se r ie s
DC
50
70
0
20
40
60
1
10
100
NumberOf Equal Amplitude Half Cycle Current Pulses(N)
Average On-state Current (A)
Fig. 2 - Current Rating Characteristics
Fig. 5 - Maximum Non-Repetitive Surge Current
60
50
40
30
20
10
0
600
Maximum Non Repetitive Surge Current
180°
120°
90°
Versus Pulse Train Duration. Control
550
Of Conduction May Not Be Maintained.
Initial T = 125°C
J
60°
500
450
400
350
300
250
No Voltage Reapplied
30°
RMS Lim it
Rated V
RRM
Reapplied
Conduction Angle
4 0TPS. . Se r i e s
4 0 TPS. . Se r ie s
T = 125°C
J
0
5
10 15 20 25 30 35 40
0.01
0.1
Pulse Tra in Dura tion (s)
1
Average On-state Current (A)
Fig. 3 - On-State Power Loss Characteristics
Fig. 6 - Maximum Non-Repetitive Surge Current
www.vishay.com
4
For technical questions, contact: diodes-tech@vishay.com
Document Number: 93709
Revision: 12-Sep-08
40TPS16 High Voltage Series
Phase Control SCR, 35 A
Vishay High Power Products
100
10
1
T = 2 5° C
J
T = 125°C
J
4 0 TPS. . Se r ie s
1.5
0.5
1
2
Insta nta neous On-sta te Volta g e (V)
Fig. 7 - On-State Voltage Drop Characteristics
100
10
1
Rectangular gate pulse
(1) PGM = 100 W, tp = 500 µs
a)Recommended load line for
rated di/ dt: 20 V, 30 ohms
tr= 0.5 µs, tp >= 6µs
b)Recommended load line for
<= 30%rated di/dt: 20 V, 65 ohms
tr = 1 µs, tp >= 6 µs
(2) PGM = 50 W, tp = 1 ms
(3) PGM = 20 W, tp = 25 ms
(4) PGM = 10 W, tp = 5 ms
(a)
(b)
(3) (2) (1)
(4)
VGD
IGD
0.01
40TPS..
Frequency Limited by PG(AV)
10 100 1000
0.1
0.001
0.1
1
InstantaneousGate Current (A)
Fig. 8 - Gate Characteristics
1
Steady State Value
(DC Operation)
D = 0.50
D = 0.33
D = 0.25
D = 0.17
D = 0.08
0.1
Sin g le Pu lse
40TPS.. Series
0.01
0.0001
0.001
0.01
0.1
1
Square Wave Pulse Duration (s)
Fig. 9 - Thermal Impedance ZthJC Characteristics
Document Number: 93709
Revision: 12-Sep-08
For technical questions, contact: diodes-tech@vishay.com
www.vishay.com
5
40TPS16 High Voltage Series
Phase Control SCR, 35 A
Vishay High Power Products
ORDERING INFORMATION TABLE
Device code
40
T
P
S
16
-
1
2
3
4
5
6
1
2
-
-
Current rating (40 = 40 A)
Circuit configuration:
T = Thyristor
-
-
Package:
3
4
P = TO-247
Type of silicon:
S = Standard recovery rectifier
5
6
-
-
Voltage code x 100 = VRRM (16 = 1600 V - contact factory)
None = Standard production
PbF = Lead (Pb)-free
LINKS TO RELATED DOCUMENTS
Dimensions
http://www.vishay.com/doc?95024
http://www.vishay.com/doc?95226
Part marking information
www.vishay.com
6
For technical questions, contact: diodes-tech@vishay.com
Document Number: 93709
Revision: 12-Sep-08
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
相关型号:
©2020 ICPDF网 联系我们和版权申明