5063JD121R0F12AF5 [VISHAY]
Fixed Resistor, Metal Film, 0.4W, 121ohm, 200V, 1% +/-Tol, 100ppm/Cel, Through Hole Mount, AXIAL LEADED;型号: | 5063JD121R0F12AF5 |
厂家: | VISHAY |
描述: | Fixed Resistor, Metal Film, 0.4W, 121ohm, 200V, 1% +/-Tol, 100ppm/Cel, Through Hole Mount, AXIAL LEADED 电阻器 |
文件: | 总7页 (文件大小:212K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
BCcomponents
DATA SHEET
5063JD series (space miser)
0.25 to 0.40 W; 1% and 5%
Metal film resistors
Product specification
2000 Aug 08
File under BCcomponents, BC08
BCcomponents
Product specification
5063JD series (space miser)
0.25 to 0.40 W; 1% and 5%
Metal film resistors
DESCRIPTION
A homogeneous film of metal alloy is deposited on a high grade BALOX ceramic body. After a helical groove has been cut
in the resistive layer, tinned connecting wires of electrolytic copper are welded to the end-caps. The resistors are coated
with a blue lacquer which provides electrical, mechanical, and climatic protection. The encapsulation is resistant to all
cleaning solvents in accordance with “MIL-STD-202E, method 215”, and “IEC 60068-2-45”.
QUICK REFERENCE DATA
DESCRIPTION
VALUE
Resistance range
0.22 Ω to 10 MΩ; see Table 1
5%, (E24); 1%, (E24/E96)
100 × 10−6/K
Resistance tolerance and series
Temperature coefficient
Operation mode
normal
long term
55/125/56
0.25 W
Climatic category (LCT/UCT/days)
Max. dissipation, P70
55/155/56
0.40 W
Thermal resistance, Rth
200 °C/W
200 V (DC or RMS)
max. 0.1 V/V
Max. continuous operating voltage, Umax
Noise R ≤ 1 MΩ
Surface temperature
155 °C
125 °C
Operating temperature range
−55 °C to +155 °C
−55 °C to +125 °C
Max. resistance change at P70 for resistance range,
∆R/R max., after:
1000 h
0.50%
1.0%
−
0.25%
0.50%
1.5%
8000 h
225000 h
Permissible voltage against ambient:
1 minute
300 V
75 V
continuous
Stability (∆R/R max.) after:
load (1000 hours)
climatic test
0.50% + 0.05 Ω
0.25% + 0.05 Ω
1.0% + 0.05 Ω
0.25% + 0.05 Ω
0.25% + 0.05 Ω
resistance to soldering heat
short time overload (400 V max.)
2000 Aug 08
2
BCcomponents
Product specification
5063JD series (space miser)
0.25 to 0.40 W; 1% and 5%
Metal film resistors
ORDERING INFORMATION
Table 1 Ordering code indicating resistor type and packaging
TC
( × 10−6/K)
TOL.
(%)
SPQ
PART NUMBER
TYPE
RESISTANCE RANGE
(units)
−
−
5
5
1
1
jumper(1)
jumper(1)
5063JD0R000J12AFS
5063JD0R000J18AFS
5063JDxxxxxJ12AFS
5063JDxxxxxJ18AFS
5063JDxxxxxF12AF5
5063JDxxxxxF18AF5
5000; tape & reel
5000; ammopack
5000; tape & reel
5000; ammopack
5000; tape & reel
5000; ammopack
0.22 to 0.91 Ω
0.22 to 0.91 Ω
1 Ω to 10 MΩ
1 Ω to 10 MΩ
5063JD
100
Note
1. A 0 Ω jumper is available with a maximum resistance Rmax ≤ 10 mΩ at 3 A.
Composition of the clear text code (NAFTA P/N)
ORDERING EXAMPLE: CLEAR TEXT CODE
• The resistors have an ordering code starting with 50
The ordering code of a 5063JD resistor, value 5600 Ω 1%,
taped on a bandolier of 5000 units in tape on reel is:
5063JD5K600F12AF5.
• The subsequent digits indicate the resistor type,
temperature coefficient, ohmic value, tolerance and
packaging; see Table 1
• The ohmic value is represented by 5-digits; see Table 2
• For temperature coefficient and tolerance, see Table 3.
Table 2 Examples of the ohmic value
OHMIC
VALUE
5-DIGIT
VALUE
0.22 Ω
1 Ω
0R220
1R000
10R00
100R0
1K000
10K00
100K0
1M000
10 Ω
100 Ω
1 kΩ
10 kΩ
100 kΩ
1 MΩ
Table 3 Letter coding for temperature coefficient and
tolerance
TC
(×10−6/K)
LETTER
CODE
TOL.
(%)
LETTER
CODE
100
D
5
1
J
−
−
F
2000 Aug 08
3
BCcomponents
Product specification
5063JD series (space miser)
0.25 to 0.40 W; 1% and 5%
Metal film resistors
FUNCTIONAL DESCRIPTION
Product characterization
Standard values of nominal resistance are taken from the
E24 or E96 series for resistors with a tolerance of
5% or 1%.
P
max
(%P
JW36
)
rated
The values of the E24 series are in accordance with
“IEC publication 60063”.
0.4
0.2
0
Limiting values
LIMITING
VOLTAGE(1)
(V)
LIMITING
POWER
(W)
TYPE
40
60
80
100
120
140
T
160
o
( C)
amb
5063JD
Note
200
0.40
Fig.2 Derating curve, long term operation.
1. The maximum voltage that may be continuously
applied to the resistor element, see
“IEC publication 60115-1”.
NOISE
The current noise is measured in accordance with
“DIN 44049 Part 1 and IEC 600195”. Maximum values are
for 99.8% of all resistors; see Fig 3.
DERATING
The power that the resistor can dissipate depends on the
operating temperature; see Figs 1 and 2.
JW39
P
noise
max
JW35
level
(%P
rated
)
3.0
µV
V
0.4
2.0
1.0
0.5
0.2
0.2
0
0.05
20 M
10 M
R (Ω)
10 k
200 k
1 M
40
60
80
100
120
140 155
o
( C)
T
amb
Fig.3 Current noise.
Fig.1 Derating curve, normal operation.
2000 Aug 08
4
BCcomponents
Product specification
5063JD series (space miser)
0.25 to 0.40 W; 1% and 5%
Metal film resistors
Pulse-load behaviour
JW37
3
10
^
P
max
(W)
2
10
single pulse
rep. pulse
10
t
/t = 1000
i
p
1
1
10
6
5
4
3
2
1
10
10
10
10
10
10
1
t
(s)
i
ˆ
Fig.4 Pulse on a regular basis; maximum permissible peak pulse power (Pmax) as
a function of pulse duration (ti).
JW38
1200
V
max
(V)
800
400
0
10
6
5
4
3
2
1
10
10
10
10
10
1
t
(s)
i
ˆ
Fig.5 Pulse on a regular basis; maximum permissible peak pulse voltage (Vmax) as
a function of pulse duration (ti).
2000 Aug 08
5
BCcomponents
Product specification
5063JD series (space miser)
0.25 to 0.40 W; 1% and 5%
Metal film resistors
Definition of symbols (see Figs 4, 5, 6 and 7)
PULSE SHAPES
Figure 6 shows the maximum pulse-load for a rectangular
SYMBOL
DESCRIPTION
applied peak pulse power
ˆ2
ˆ
P
ti ⋅ V
tp ⋅ R
pulse shape: P =
-------------
maximum permissible peak pulse power;
see Fig.4
ˆ
Pmax
ˆ
Other pulses should be converted into rectangular pulse
shapes (see Fig.7), having the same energy at a given peak
voltage. The following equation shows the calculation for
exponential pulses:
Vi
applied peak pulse voltage; see Fig 6
maximum permissible peak pulse voltage;
see Fig.5
ˆ
Vmax
V(t)
R
pulse voltage
ˆ2
τe
2 ⋅ tp
V
L
R
nominal resistance value
rated dissipation at ambient temperature
nominal resistance value
pulse duration (rectangular pulses)
pulse repetition time
----------- ------
with τe = R ⋅ C or τe =
P =
⋅
---
R
PU
Rnom
ti
tp
MGA206
V
Pulses
t
p
The permissible pulse-load is determined by the resistance
change as given for the endurance test after 8000 hours.
t
i
V
i
PULSE VOLTAGE LIMIT
ˆ
The maximum permissible impulse voltage Vmax is the
voltage pulse short overload depending on the impulse time
ti. High ohmic values are protected by the interdependence
of voltage limit and impulse time. this function is given by
t
2.5 ⋅ Vmax
1 + ti ⋅ K
Fig.6 Rectangular pulses.
ˆ
the equation: Vmax = ------------------------- + Vmax
Vmax = maximum permissible continuous voltage;
ti = pulse time;
K = 100 s−1
.
MGA207
MAXIMUM PULSE-LOAD
V
t
p
The average load P must not exceed the rated dissipation.
For resistance values above the critical resistance the rated
dissipation is given by the resistance value and the limiting
2
1
tpR
t2
t1
element voltage Vmax: P =
U (t)dt ≤ Pυ
--------
∫
t
CONTINUOUS AND SINGLE PULSE-LOAD
τ
There is a difference between repetitive pulse-load
ti
Fig.7 Exponential pulses.
---
P = ⋅ P with P = power at the pulse time ti or
tp
single pulse load (e.g. switching events P > 0 ).
A higher pulse-load Pmax is accepted in the latter case.
2000 Aug 08
6
BCcomponents
Product specification
5063JD series (space miser)
0.25 to 0.40 W; 1% and 5%
Metal film resistors
MECHANICAL DATA
Mass per 100 units
13 g
L
2
∅d
Marking
JW34
The nominal resistance and tolerance are marked on the
resistor using four or five coloured bands in accordance with
IEC publication 60062 “Colour codes for fixed resistors”.
∅D
L
1
For dimensions see Table 4.
Mounting
The resistors are suitable for processing on automatic
insertion equipment in addition to cutting and bending
machines.The minimum bending is 5 mm (.200 inch).
Fig.8 Outline.
Table 4 Resistor type and physical dimensions; see Fig.8
Outlines
∅D
MAX.
(mm)
L1
MAX.
(mm)
L2
MAX.
(mm)
The length of the body (L1) is measured by inserting the leads
into holes of two identical gauge plates and moving these
plates parallel to each other until the resistor body is
clamped without deformation (“IEC publication 60294”).
∅d
(mm)
TYPE
Dimensions in inches
5063JD 0.063
Dimensions in millimetres
5063JD 1.6
.142
1.14
29
.020
0.5
3.6
2000 Aug 08
7
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明