首页 |元器件品牌

5KP5.0A [VISHAY]

TRANSZORB⑩ TRANSIENT VOLTAGE SUPPRESSOR; 的TransZorb ™瞬态电压抑制器
5KP5.0A
型号： 5KP5.0A
厂家： VISHAY    VISHAY
描述：

TRANSZORB⑩ TRANSIENT VOLTAGE SUPPRESSOR
的TransZorb ™瞬态电压抑制器

二极管 局域网
文件： 总4页 (文件大小：70K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
5KP5.0 THRU 5KP110A  
TRANSZORB™ TRANSIENT VOLTAGE SUPPRESSOR  
Stand-off Voltage - 5.0 to 110 Volts  
Peak Pulse Power - 5000 Watts  
FEATURES  
♦ Plastic package has Underwriters Laboratory  
Flammability Classification 94V-0  
♦ Glass passivated junction  
Case Style P600  
♦ 5000W peak pulse power  
capability with a 10/1000µs waveform,  
repetition rate (duty cycle): 0.05%  
♦ Excellent clamping capability  
♦ Low incremental surge resistance  
♦ Fast response time: typically less  
1.0 (25.4)  
MIN.  
0.360 (9.1)  
0.340 (8.6)  
0.360 (9.1)  
0.340 (8.6)  
than 1.0ps from 0 Volts to V  
(BR)  
♦ Devices with V( )>10V I are typically I less  
BR  
D
D
than 1.0µA  
♦ High temperature soldering guaranteed:  
265°C/10 seconds, 0.375" (9.5mm) lead length,  
5lbs. (2.3 kg) tension  
0.052 (1.32)  
1.0 (25.4)  
0.048 (1.22)  
MIN.  
DIA.  
MECHANICAL DATA  
Case: Molded plastic body over glass passivated junction  
Terminals: Solder plated axial leads, solderable per  
MIL-STD-750, Method 2026  
Polarity: The color band denotes the cathode, which is  
postitive with respect to the anode under normal TVS oper-  
ation  
Dimensions in inches and (millimeters)  
Available in uni-directional only  
Mounting Position: Any  
Weight: 0.07 ounce, 2.1 grams  
MAXIMUM RATINGS AND CHARACTERISTICS  
Ratings at 25°C ambient temperature unless otherwise specified.  
SYMBOL  
VALUE  
UNITS  
Peak pulse power dissipation with a 10/1000µs  
waveform (NOTE 1, FIG. 1)  
PPPM  
Minimum 5000  
Watts  
Peak pulse current with a 10/1000µs  
waveform (NOTE 1)  
IPPM  
Amps  
Watts  
SEE TABLE 1  
Steady state power dissipation at TL=75°C  
lead lengths 0.375” (9.5mm) (NOTE 2)  
PM(AV)  
8.0  
Peak forward surge current, 8.3ms single half  
sine-wave superimposed on rated load  
(JEDEC Method) (NOTE 3)  
IFSM  
400  
Amps  
Instantaneous forward voltage at 100A, (NOTE 3)  
Operating junction and storage temperature range  
VF  
3.5  
Volts  
°C  
TJ, TSTG  
-55 to +175  
NOTES:  
(1) Non-repetitive current pulse, per Fig. 3 and derated above TA=25°C per Fig. 2  
(2) Mounted on copper pad area of 0.8 x 0.8” (20 x 20mm) per Fig. 5  
(3) Measured on 8.3ms single half sine-wave or equivalent square wave, duty cycle=4 pulses per minute maximum  
1/21/99  
ELECTRICAL CHARACTERISTICS at (T =25°C unless otherwise noted) TABLE 1  
A
Maximum  
Breakdown Voltage  
V(BR)  
(Volts) (NOTE 1)  
Maximum  
Reverse  
Leakage  
at VWM  
Peak Pulse  
Current  
IPPM  
Maximum  
Clamping  
Voltage at  
IPPM  
Maximum  
Temperature  
Coefficient  
of V(BR)  
Test  
Current  
at IT  
Stand-off  
Voltage  
VWM  
(NOTE 2)  
Device Type  
5KP5.0  
5KP5.0A  
5KP6.0  
5KP6.0A  
5KP6.5  
5KP6.5A  
5KP7.0  
5KP7.0A  
5KP7.5  
5KP7.5A  
5KP8.0  
5KP8.0A  
5KP8.5  
5KP8.5A  
5KP9.0  
5KP9.0A  
5KP10  
MIN  
6.40  
6.40  
6.67  
6.67  
7.22  
7.22  
7.78  
7.78  
8.33  
8.33  
8.89  
8.89  
9.44  
9.44  
10.0  
10.0  
11.1  
11.1  
12.2  
12.2  
13.3  
13.3  
14.4  
14.4  
15.6  
15.6  
16.7  
16.7  
17.8  
17.8  
18.9  
18.9  
20.0  
20.0  
22.2  
22.2  
24.4  
24.4  
26.7  
26.7  
28.9  
28.9  
31.1  
31.1  
33.3  
33.3  
MAX  
7.30  
7.00  
8.15  
7.37  
8.82  
7.98  
9.51  
8.60  
10.2  
9.21  
10.9  
9.83  
11.5  
10.4  
12.2  
11.1  
13.6  
12.3  
14.9  
13.5  
16.3  
14.7  
17.6  
15.9  
19.1  
17.2  
20.4  
18.5  
21.8  
19.7  
23.1  
20.9  
24.4  
22.1  
27.1  
24.5  
29.8  
26.9  
32.6  
29.5  
35.3  
31.9  
38.0  
34.4  
40.7  
36.8  
(mA)  
(Volts)  
ID (µA)  
(Amps)  
VC (Volts)  
(% / °C)  
50  
50  
5.0  
5.0  
2000  
2000  
5000  
5000  
2000  
2000  
1000  
1000  
250  
521  
543  
439  
485  
407  
446  
376  
417  
350  
388  
333  
368  
314  
347  
296  
325  
266  
294  
249  
275  
227  
251  
210  
233  
194  
216  
186  
205  
174  
192  
164  
181  
155  
171  
140  
154  
127  
141  
116  
129  
107  
119  
100  
110  
93.5  
103  
9.6  
0.057  
0.057  
0.061  
0.061  
0.065  
0.065  
0.068  
0.068  
0.073  
0.073  
0.075  
0.075  
0.078  
0.078  
0.081  
0.081  
0.084  
0.084  
0.086  
0.086  
0.088  
0.088  
0.090  
0.090  
0.092  
0.092  
0.094  
0.094  
0.096  
0.096  
0.097  
0.097  
0.098  
0.098  
0.099  
0.099  
0.100  
0.100  
0.101  
0.101  
0.101  
0.101  
0.102  
0.102  
0.103  
0.103  
9.2  
50  
6.0  
11.4  
10.3  
12.3  
11.2  
13.3  
12.0  
14.3  
12.9  
15.0  
13.6  
15.9  
14.4  
16.9  
15.4  
18.8  
17.0  
20.1  
18.2  
22.0  
19.9  
23.8  
21.5  
25.8  
23.2  
26.9  
24.4  
28.8  
26.0  
30.5  
27.6  
32.2  
29.2  
35.8  
32.4  
39.4  
35.5  
43.0  
38.9  
46.6  
42.1  
50.1  
45.4  
53.5  
48.4  
50  
6.0  
50  
6.5  
50  
6.5  
50  
7.0  
50  
7.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
7.5  
7.5  
250  
8.0  
150  
8.0  
150  
8.5  
50.0  
50.0  
20.0  
20.0  
15.0  
15.0  
10.0  
10.0  
10.0  
10.0  
10.0  
10.0  
10.0  
10.0  
10.0  
10.0  
10.0  
10.0  
10.0  
10.0  
10.0  
10.0  
10.0  
10.0  
10.0  
10.0  
10.0  
10.0  
10.0  
10.0  
10.0  
10.0  
10.0  
10.0  
8.5  
9.0  
9.0  
10.0  
10.0  
11.0  
11.0  
12.0  
12.0  
13.0  
13.0  
14.0  
14.0  
15.0  
15.0  
16.0  
16.0  
17.0  
17.0  
18.0  
18.0  
20.0  
20.0  
22.0  
22.0  
24.0  
24.0  
26.0  
26.0  
28.0  
28.0  
30.0  
30.0  
5KP10A  
5KP11  
5KP11A  
5KP12  
5KP12A  
5KP13  
5KP13A  
5KP14  
5KP14A  
5KP15  
5KP15A  
5KP16  
5KP16A  
5KP17  
5KP17A  
5KP18  
5KP18A  
5KP20  
5KP20A  
5KP22  
5KP22A  
5KP24  
5KP24A  
5KP26  
5KP26A  
5KP28  
5KP28A  
5KP30  
5KP30A  
ELECTRICAL CHARACTERISTICS at (T =25°C unless otherwise noted) TABLE 1 (Cont’d)  
A
Maximum  
Breakdown Voltage  
V(BR)  
(Volts) (NOTE 1)  
Maximum  
Reverse  
Leakage  
at VWM  
Peak Pulse  
Current  
IPPM  
Maximum  
Clamping  
Voltage at  
IPPM  
Maximum  
Temperature  
Coefficient  
of V(BR)  
Test  
Current  
at IT  
Stand-off  
Voltage  
VWM  
(NOTE 2)  
Device Type  
5KP33  
MIN  
36.7  
36.7  
40.0  
40.0  
44.4  
44.4  
47.8  
47.8  
50.0  
50.0  
53.3  
53.3  
56.1  
56.7  
60.0  
60.0  
64.4  
64.4  
66.7  
66.7  
71.1  
71.1  
77.6  
77.8  
83.3  
83.3  
86.7  
86.7  
94.4  
94.4  
100  
MAX  
44.9  
40.6  
48.9  
44.2  
54.3  
49.1  
58.4  
52.8  
61.1  
55.3  
65.2  
58.9  
69.3  
62.7  
73.3  
66.3  
78.7  
71.2  
81.5  
73.7  
96.9  
78.6  
95.1  
86.0  
102  
(mA)  
(Volts)  
ID (µA)  
(Amps)  
VC (Volts)  
(% / °C)  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
5.0  
33.0  
33.0  
36.0  
36.0  
40.0  
40.0  
43.0  
43.0  
45.0  
45.0  
48.0  
48.0  
51.0  
51.0  
54.0  
54.0  
58.0  
58.0  
60.0  
60.0  
64.0  
64.0  
70.0  
70.0  
75.0  
75.0  
78.0  
78.0  
85.0  
85.0  
90.0  
90.0  
100  
10.0  
10.0  
10.0  
10.0  
10.0  
10.0  
10.0  
10.0  
10.0  
10.0  
10.0  
10.0  
10.0  
10.0  
10.0  
10.0  
10.0  
10.0  
10.0  
10.0  
10.0  
10.0  
10.0  
10.0  
10.0  
10.0  
10.0  
10.0  
10.0  
10.0  
10.0  
10.0  
10.0  
10.0  
10.0  
10.0  
84.7  
93.8  
77.8  
86.1  
70.0  
77.5  
65.2  
72.0  
62.3  
68.8  
58.5  
64.6  
54.9  
60.7  
51.9  
57.4  
48.5  
53.4  
46.7  
51.7  
43.9  
48.5  
40.0  
44.2  
37.3  
41.3  
36.0  
39.7  
33.1  
36.5  
31.3  
34.2  
27.9  
30.9  
25.5  
28.2  
59.0  
53.3  
64.3  
58.1  
71.4  
64.5  
76.7  
69.4  
80.3  
72.7  
85.5  
77.4  
91.1  
82.4  
96.3  
87.1  
103  
94  
0.104  
0.104  
0.104  
0.104  
0.105  
0.105  
0.105  
0.105  
0.106  
0.106  
0.106  
0.106  
0.107  
0.107  
0.107  
0.107  
0.107  
0.107  
0.108  
0.108  
0.108  
0.108  
0.108  
0.108  
0.108  
0.108  
0.108  
0.108  
0.108  
0.110  
0.110  
0.110  
0.110  
0.110  
0.112  
0.112  
5KP33A  
5KP36  
5KP36A  
5KP40  
5KP40A  
5KP43  
5KP43A  
5KP45  
5KP45A  
5KP48  
5KP48A  
5KP51  
5KP51A  
5KP54  
5KP54A  
5KP58  
5KP58A  
5KP60  
107  
97  
5KP60A  
5KP64  
114  
5KP64A  
5KP70  
103  
125  
113  
5KP70A  
5KP75  
134  
121  
139  
126  
151  
137  
160  
146  
179  
162  
196  
177  
5KP75A  
5KP78  
92.1  
106.0  
95.8  
115  
5KP78A  
5KP85  
5KP85A  
5KP90  
104  
122  
5KP90A  
5KP100  
5KP100A  
5KP110  
5KP110A  
100  
111  
111  
136  
111  
123  
100  
122  
149  
110  
122  
135  
110  
NOTES:  
(1) V(BR) measured after IT applied for 300µs IT=square wave pulse or equivalent  
(2) Surge current waveform per Fig. 3 and derate per Fig. 2  
(3) All items and symbols are consistent with ANSI/IEEE C62.35  
APPLICATION  
The 5KP series of high power transient voltage suppressors were designed to be used on the output of switching power supplies. These devices may be used to replace  
crowbar circuits. Both the 5 and 10 percent voltage tolerances are referenced to the power supply output voltage level.  
They are able to withstand high levels of peak current while allowing a circuit breaker to trip or a fuse blow before shorting. This will enable the user to reset the breaker or  
replace the fuse and continue operation. For this type operation, it is recommended that a sufficient mounting surface be used for dissipating the heat generated by the  
Transient Voltage Suppressor during the transient or over-voltage condition.  
Transient Voltage Suppressors are Silicon PN Junction devices designed for absorption of high voltage transients associated with power disturbances, switching and  
induced lighting effects. This series is available from 5.0 volts thru 110 volts.  
RATINGS AND CHARACTERISTIC CURVES 5KP5.0 THRU 5KP110A  
FIG. 2 - PULSE DERATING CURVE  
FIG. 1 - PEAK PULSE POWER RATING CURVE  
100  
NON-REPETITIVE  
PULSE WAVEFORM  
100  
10  
SHOWN in FIG. 3  
T
A
= 25°C  
75  
50  
25  
0
1.0  
0.1  
µ
µ
µ
µ
100 s  
1.0ms  
10ms  
0.1 s  
1.0 s  
10 s  
td, PULSE WIDTH, sec.  
0
25  
50  
75  
100  
125 150  
175 200  
TA, AMBIENT TEMPERATURE, °C  
FIG. 3 - PULSE WAVEFORM  
FIG. 4 - TYPICAL JUNCTION CAPACITANCE  
150  
100,000  
10,000  
1,000  
100  
PULSE WIDTH (td) is DEFINED  
as the POINT WHERE the PEAK  
T =25°C  
J
f=1 MHz  
Vsig=50mVp-p  
tr=10µsec.  
PEAK VALUE  
CURRENT DECAYS to 50% of I  
PP  
I
PPM  
MEASURED at  
ZERO BIAS  
100  
50  
0
HALF VALUE - I  
PP  
2
10/1000µsec. WAVEFORM  
as DEFINED BY R.E.A.  
MEASURED at  
STAND-OFF  
VOLTAGE, V  
WM  
td  
0
1.0  
2.0  
t, TIME, ms  
3.0  
4.0  
1
10  
100 200  
FIG. 5 - STEADY STATE POWER DERATING CURVE  
V(BR), BREAKDOWN VOLTAGE, VOLTS  
8
6
4
2
60 H  
Z
RESISTIVE OR INDUCTIVE LOAD  
FIG. 6 - MAXIMUM NON-REPETITIVE FORWARD  
SURGE CURRENT  
400  
350  
8.3ms SINGLE HALF SINE-WAVE  
(JEDEC Method)  
= 0.375” (9.5mm)  
lead lengths  
L
300  
250  
0.8 x 0.8 x 0.040” (20 x 20mm)  
COPPER HEAT SINK  
200  
150  
0
0
25  
50  
75  
100  
125  
150  
175  
200  
TL, LEAD TEMPERATURE,°C  
100  
1
10  
NUMBER OF CYCLES AT 60 HZ  
100  

相关型号：

SI9130DB

 5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

 Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

 500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明