732P205X5200L [VISHAY]

CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 200V, 2uF, THROUGH HOLE MOUNT, AXIAL LEADED;


型号：	732P205X5200L
厂家：	VISHAY
描述：	CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 200V, 2uF, THROUGH HOLE MOUNT, AXIAL LEADED
文件：	总2页 (文件大小：65K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Type 732P

Vishay Sprague

Film Capacitors

Metalized Polypropylene,

Wrap-and-Fill

FEATURES

• High stability

• High ripple current to 30A

• Low inductance and low ESR

• Excellent AC performance

PERFORMANCE CHARACTERISTICS

Operating Temperature: - 55°C to + 105°C.

Capacitance Range: 1.0µF to 30.0µF.

Capacitance Tolerance: ± 10, ± 5%.

DC Life Test: 140% of rated DC voltage for 250 hours at

+ 105°C. No open or short circuits. No visible damage

evident. Maximum Capacitance Change: ± 1.0%.

Minimum IR = 50% of initial limit. Maximum DF = .10%.

Humidity Test: 95% relative humidity at + 40°C for 250

hours. No visible damage evident. Maximum

Capacitance Change: ± 1.0%. Minimum IR = 20% of initial

limit. Maximum DF = .12%.

Voltage Rating: 200 WVDC to 600 WVDC.

Dissipation Factor: .10% maximum.

Equivalent Series Resistance: 20kHz - 100kHz (see

Standard Ratings table).

Voltage Test: 200% of rated voltage for 2 minutes.

∆V/∆T: 10 volts/microsecond maximum.

Insulation Resistance: At + 25°C, 100,000

Megohm - Microfarads or 200,000 Megohm minimum.

ENVIRONMENTAL CHARACTERISTICS

Vibration Test (Condition B): No mechanical damage,

short, open or intermittent circuits.

PHYSICAL CHARACTERISTICS

Lead Pull: 5 pounds (2.3 kilograms) for one minute.

No physical damage.

Lead Bend: After three complete consecutive bends,

no damage.

Marking: Sprague^®trademark, type or part number,

capacitance and voltage.

STANDARD RATINGS in inches [millimeters]

Max. ESR

MAXIMUM RIPPLE CURRENT (Amps rms) @ 20kHz - 100kHz

Case Temperature @

PART NUMBER*

(Milliohms)

20kHz -

CAP.

(µF)

± 10%

CASE SIZE

TOLERANCE D (Max.) x L ± 0.062 [1.57]

100kHz

+ 25°C + 35°C + 45°C + 55°C + 65°C + 75°C + 85°C

200 WVDC

1.0

2.0

732P105X9200L 0.531 x 0.750 [13.49 x 19.05]

732P205X9200L 0.596 x 0.938 [15.14 x 23.83]

732P305X9200L 0.717 x 0.938 [18.21 x 23.83]

732P505X9200L 0.733 x 1.250 [18.62 x 31.75]

732P106X9200L 0.898 x 1.500 [22.81 x 38.10]

732P206X9200L 1.000 x 2.250 [25.40 x 57.15]

732P306X9200L 1.200 x 2.250 [30.48 x 57.15]

15.0

12.0

11.0

10.0

9.0

9.2

8.5

10.0

11.2

12.7

15.0

7.8

9.1

10.3

11.6

14.2

15.0

7.0

8.2

6.0

7.0

4.9

5.8

4.5

5.3

10.8

12.1

13.8

15.0

3.0

9.4

8.0

6.5

5.9

5.0

10.4

12.7

15.0

9.0

7.4

8.7

10.0

20.0

30.0

11.0

13.6

15.0

9.0

8.2

8.0

11.1

12.4

10.0

11.4

6.0

400 WVDC

7.3

7.2

8.7

5.9

7.1

5.4

6.5

1.0

2.0

732P105X9400L 0.512 x 1.250 [13.00 x 31.75]

732P205X9400L 0.698 x 1.250 [17.73 x 31.75]

732P305X9400L 0.747 x 1.500 [18.97 x 38.10]

732P505X9400L 0.862 x 1.750 [21.89 x 44.45]

732P106X9400L 1.030 x 2.250 [26.16 x 57.15]

732P206X9400L 1.440 x 2.250 [36.58 x 57.15]

20.0

15.0

13.0

11.0

9.0

7.3

12.0

15.0

12.0

13.8

15.0

11.3

12.6

14.7

15.0

10.1

11.3

13.1

15.0

3.0

9.8

8.0

7.3

11.4

13.8

15.0

9.3

11.3

14.1

8.5

10.3

12.8

5.0

10.0

20.0

6.0

600 WVDC

1.0

2.0

732P105X9600L 0.713 x 1.500 [18.11 x 38.10]

732P205X9600L 0.895 x 1.750 [22.73 x 44.45]

732P305X9600L 1.086 x 1.750 [27.58 x 44.45]

732P505X9600L 1.192 x 2.250 [30.28 x 57.15]

732P106X9600L 1.668 x 2.250 [42.37 x 57.15]

19.0

15.0

12.0

10.0

6.0

9.5

7.8

9.5

10.7

12.5

15.0

7.1

8.7

15.0

13.4

15.0

11.6

13.1

15.0

3.0

9.8

5.0

10.0

11.4

14.1

* Part Numbers listed are for a capacitance tolerance of ± 10%. To specify ± 5% tolerance, change the "X9" in the Part Number to "X5".

ORDERING INFORMATION

732P

105

200

TYPE

CAPACITANCE

TOLERANCE

DC VOLTAGE

RATING

TERMINAL

This is expressed in picofarads. The first two

digits are the significant figures. The third is the

number of zeros to follow. Values must conform

to the decade rating for the tolerance specified.

X9 = ± 10% (Inventoried)

X5 = ± 5%

This is expressed in

volts.

L = Wire leads*

* Leads are bare, solid tinned copper wire. Lead wire sizes are:

Case diameter < .700" [17.78mm], lead AWG No. 20.

For technical questions, contact spresale@vishay.com

www.vishay.com

102

Document Number: 42035

Revision 17-Nov-03

Legal Disclaimer Notice

Vishay

Notice

Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc.,

or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.

Information contained herein is intended to provide a product description only. No license, express or implied, by

estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's

terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express

or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness

for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.

The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.

Customers using or selling these products for use in such applications do so at their own risk and agree to fully

indemnify Vishay for any damages resulting from such improper use or sale.

Document Number: 91000

Revision: 08-Apr-05

www.vishay.com

相关型号：